Testing Machines Dealers in Jafferkhanpet, Chennai

SAMS Los Angles Abrasion Machine is used for determining are resistance to bear of small size Course Aggregate and Crushed rock The machine consistence of a hollow cylinder mounted one sturdy frame on ball bearings a detachable shelf which extends which stand through out the inside length of the drum catches the abrasive charge and dose not allow its two fall on the cover the drum is rotated at a speed of 30-33 RPM by an electric motor through a heavy duty reduction gear motor is suitable for operation on 220 Volts-50Hz- 1p.h.   Product Code : SAMS CVL - 014

• Material: Mild Steel
• Automatic Grade: Semi-Automatic
• Phase: single
• Power: 400-440v
• Model Name/Number: VNSPL
• Capacity: 100,200,400,600,1000,1200,1500,2000
• Size: As per spec
• Accuracy: AC supply
• Place Of Origin: chennai

• Voltage: 220 Volts
• speed: 30-33 RPM
• Frequency: 50Hz
• Product Code: ELSHADDAI CVL - 014

• ranges: 0-2 N, 0-20 N

The digitest Gelomat is simial to the Digitest II rubber hardness testing machine in construction. It is a Micro computer controlled hardness tester with a very high measuring accuracy within the ranges of 0-2 N, 0-20 N. Hardness- and firmness determination on soft elastic materials like Gelatine, Gelatine capsules, Modelling clay, Gel stability, automatic test run, flow curve, hysteresis curve etc.

• Features: Quality tested , Easy to use , Durable
• Type: Spring Testing Machine
• Application: Industrial
• Grade: Automatic
• Minimum Order Quantity: 1 Piece

• Voltage: AC 220 V
• Automation Grade: Automatic
• Frequency: 50 Hz
• Phase: Three phase
• Vacuum Degree: 0 to -90 kPa
• Accuracy: +/- 1% of reading force
• Air Pressure: 0.7 MPa

Tensile strength is the stress at which a material breaks or permanently deforms. There are three definitions of tensile strength, yield strength, ultimate strength and breaking strength. Tensile tests are usually carded out on wire, strip or machined samples with either circular or rectangular cross section. Test pieces are screwed into or gripped in jaws and stretched by moving the grips apart at a constant rate while measuring the load and the grip separation. This data is plotted as load vs extension and then converted to engineering stress (load/original area) vs engineering strain (fractional change in length over the test section assuming the deformation is uniform). In special circumstances, the actual stress and strain may be calculated if the true cross section is measured during the test.   Features   Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Easy change from plain to threaded and screwed specimens. Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pendulum.  

• Material: Stainless Steel
• Automation Grade: Semi-Automatic
• Surface Treatment: Galvanized
• Working Temperature: -20 to 120 degree C
• Tensile Strength: 200 - 400 Mpa
• High pressure Leak Test: Upto 160 bar

Testing asphalt pavement materials such as aggregate, reclaimed asphalt pavement (RAP) and mixture specimens often requires that samples be dried to a constant mass. Most labs accomplish this using convection ovens or fan drying, depending on sample type.

Creep Test

modren rice mill machinery, thermal relay testing machine

tensile testing machines, Hardness Testers

plastic testing machine

hydrostatic pipe testing machine, jo presses, pipe cladding machine

universal hardness testing machine, hardness testing clamps