Testing Machines Dealers in Sidco Industrial Estate, Chennai

• Voltage: 220 Volts
• speed: 30-33 RPM
• Frequency: 50Hz
• Product Code: ELSHADDAI CVL - 014

SAMS Vickers Hardness Tester is a simple and accurate means to produce and measure the diamond indentation. 

• Frequency: 40 to 300 Hz

They are separated into a static and a dynamic part so that mean loads other than zero can be applied. These machines can also go through zero and perform tension-compression testing. The frequency drop mechanism provides for a method to monitor failure of the specimen that is not possible using a servo hydraulic machine. These machines do not require a COD gauge for pre-cracking CT specimen.

Tensile strength is the stress at which a material breaks or permanently deforms. There are three definitions of tensile strength, yield strength, ultimate strength and breaking strength. Tensile tests are usually carded out on wire, strip or machined samples with either circular or rectangular cross section. Test pieces are screwed into or gripped in jaws and stretched by moving the grips apart at a constant rate while measuring the load and the grip separation. This data is plotted as load vs extension and then converted to engineering stress (load/original area) vs engineering strain (fractional change in length over the test section assuming the deformation is uniform). In special circumstances, the actual stress and strain may be calculated if the true cross section is measured during the test.   Features   Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Easy change from plain to threaded and screwed specimens. Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for easy of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pendulum.  

• Voltage: AC 220 V
• Automation Grade: Automatic
• Frequency: 50 Hz
• Phase: Three phase
• Vacuum Degree: 0 to -90 kPa
• Accuracy: +/- 1% of reading force
• Air Pressure: 0.7 MPa

Description Vibrating steel yard, no loose weight, clear graduations on Stainless Steel inclined index plate, main poise on steel rollers cannot travel beyond zero. Steel notch protects bar. Notches accurately cut by special machinery. Tumbler locking device Minor poise slides on a rigid brass index bar. The lever system enclosed in a strong cast iron frame is capable of withstanding loads for excess of rated capacity. The cast iron platform is mounted on ball bearing seated in beds on the stool to provide universal motion and avoid undue wear of the inter-changeable, hardened, steel knife edges & bearings which are easily replaceable when required.

• Features: Quality tested , Easy to use , Durable
• Type: Spring Testing Machine
• Application: Industrial
• Grade: Automatic
• Minimum Order Quantity: 1 Piece

• Material: Stainless Steel
• Automation Grade: Semi-Automatic
• Surface Treatment: Galvanized
• Working Temperature: -20 to 120 degree C
• Tensile Strength: 200 - 400 Mpa
• High pressure Leak Test: Upto 160 bar

Testing asphalt pavement materials such as aggregate, reclaimed asphalt pavement (RAP) and mixture specimens often requires that samples be dried to a constant mass. Most labs accomplish this using convection ovens or fan drying, depending on sample type.

Hardness Testing Machine, hardness testing clamps

Testing Machine, 3D Printing Machine, Cnc Router Machine, Laser Machine

Gold Testing Machine

thermal relay testing machine, Centrifugal Machine

Cube Testing Machine

tensile testing machines, Hardness Testers, Universal Testing Machines

plastic testing machine, Abrasion Tester

Creep Test

hydrostatic pipe testing machine, jo presses, pipe cladding machine