Tiles Joint Filler Dealers

• Form: Powder
• Application: Industrial
• Feature: Filling Of Gaps Of Tiles, Unmatched Quality
• Packaging Type: Plastic Packets
• Packaging Size: 2kg
• Type: Tiles Joint Filler
• Country of Origin: India

We have separated our infrastructural facility into several units and one of them in warehouse. In order to maintain high quality standards, we laced our facility with modern technology. Engaged in the industry as a prominent Supplier of tile joint filler, we present the finest range of products.

Tile Joint Grout is a non-shrink material that is used for connecting and joining the sections of tiles, seal joints or fill voids. Tile Joint Grout that we offer is an accurate mixture of high quality ingredients and appreciated for its impressive & long lasting results. We make available Tile Joint Grout in tamper-proof packaging of different quantities.

• Form: Powder
• Packaging Type: Packet
• Brand: Roff
• Application: Construction
• Model Number: T11
• Suitable For: Tile
• Material: Joint Filler
• Grade Standard: Chemical
• Strength: High
• Chemical Resistance: Automotive Fluids

• Type: Tiles Joint Filler
• Certification: ISO 9001:2008 Certified
• Application: Construction
• Shelf Life: 12 Months
• Form: Powder
• Packaging Type: Plastic Packets
• Country of Origin: India

VITCON 212 TILE JF is a polymer based cementitious powder specially formulated for filling joints after placing of ceramic tiles and marble cladding to building surfaces. VITCON 212 TILE JF is specially formulated with synthetic polymeric additives to get excellent bonding to any building substrate and to reduce permeability to a large extent.Technical Specifications: Appearance: Powder Pot Life: Approximately 20 - 25 minutes depending upon ambient temp. Storage: Away from direct sunlight. Shelf life: 12 months

• Type: EPOXY JOINT FILLER KIT
• Material: THREE COMPONANT KIT
• Application: TILE & STONE JOINT FILLER
• Color: AVELABLE 20-25 COLOURS
• Packaging Type: BECKET
• Country of Origin: India

epoxy grout kit available  1 kg & 5 kg becket in mani colours 

• Country of Origin: India
• Type: Tiles Joint Filler
• Application: Construction
• Shelf Life: 6 Months
• Color: Floral White
• Feature: Easy To Process
• Form: Powder
• Packaging Type: Plastic Packets

TILEBOND-TG is a rich blend of powder polymers & viscosity modifiers, water-proofing additives & white cement with Hiquality pigments provides excellent bonding to tiles for interior orexterior application including swimming pools.   Product Benefits   Single Component Excellent bonding to Tiles Waterproof does not allow to penetrate No Peeling & Cracks Joints up to 5 mm wide can be filled.  

• Application: Tile Fixing
• Packaging Size: 5 kg, 10 kg
• Color: Floral white,Graphite,Grey,Ivory,Jaisalmer,Moss green (Refer shade card for more colors)
• Shelf Life: 2 years from the date of manufacturing
• Feature: Easy to process, Unmatched quality,Accurate composition
• Hardening Time: 4-8 Hours

Detailing:Joint Fillers fill the gaps between tiles in order to form an uniform tiling area which protects the substrate from any spillage of water, chemicals, etc. Ideal for joint filer for interior and exterior-floors and walls.

• Brand: Roff
• Color: Lily White
• Packaging Type: Bag
• Shelf Life: 12 Months

Perma R - Poxy is a two component thixotropic epoxy resin based coloured joint. Perma R - Poxy is used for filling joints in between tiles or stone. Perma R - Poxy provides for aesthetic germ proof, chemical and hard wearing joints, resistant to a wide range of spillages and chemical attacks. Part A consists of a thick colored paste consisting of epoxy resin, graded aggregates, pigments and additives. Part B consists of a soft paste consisting of a mixture of graded fillers and catalyst. Primary Uses : For grouting residential and industrial floor joints where hygiene control, damp & wet conditions are experienced along with chemical resistant properties. Typical Applications : Perma R - Poxy is designed for use in floor tile, wall tile and stone joints for interior as a jointing material and exterior application for joints width varying between 2 mm to 15 mm. The area of application are for floor and wall tiles in bathroom and shower areas, kitchen counter tops, terrace and balconies, chemical plant, hospitals, refineries, garages, laboratories, warehouses, bakeries, swimming pools etc. Coverage : 1 kg of Perma R - Poxy shall cover an area of 20 sq. ft. for joint width of 8 mm and for tile size 12â�� x12â�� Properties : Appearance : Part A: Coloured Paste, Part B: Soft Paste Density : 1600 kg/m3 Specific Gravity of Mix : 1.60 Kg/L Pot Life : 60 minutes @25o C Application Temperature : 2o C to 30o C Water Absorption : NIL Touch Free Time : 7 hours @25o C Final Cure : 7 days @25o C Temperature Resistance : up to 70o C Tensile Adhesion of Epoxy Grout : >4.5KN Shear Adhesion Strength : I n i t i a l > 2 N / M ² ( E N2003) After immersion in water >2N/ M² Abrasion Resistance : 250Mm3 (EN12808-2) Flexural Strength : 30N/mm² (EN 12808-3) Compressive Strength : In excess of 45N/mm² (EN 12808-3) Advantages : High compressive, flexural and tensile strength in excess of concrete. Chemical resistant and waterproof. Hygienic and non-dusting. Easy to use and easy to clean. Uniform coloring. Stain free. Supplied in pre-measured units. Does not support bacterial growth Packing : Perma R - Poxy is supplied in 1 kg and 5 kg pack size. Shelf Life : 12 months from the date of manufacture Mixing Ratio : Mix Part A two parts by weight to Part B one part by weight with the help of a slow speed drill equipment to a lump free homogeneous consistency. Spread the material with a spatula or squeeze float into the joints. Direction for Use : Preparation of the area : Make sure that the tiles or the stone joint operation is taken up atleast 72 hrs after the tiles are laid. The joints shall be dry and free from deleterious materials. Application : Apply masking tape where porosity in tiles or stones is encountered. If not, clean the joints with a blower and apply the grout gel using a squeezy blade. Clean the grouted area with a squeezy sponge dipped in water and finishes the surface. Allow the grout to dry through air curing.

MYK LATICRETE Tile Adhesive is a factory made cementitious dry powder which is mixed with water or special liquid additive to form a paste. This paste is applied on the floor concrete and the tile is pressed on it to complete installation. MYK LATICRETE Tile Adhesives provide:

• Packaging Size: 1.5 kg
• Brand Name: Tenax
• Minimum Reaction Temperature: +5 DegreeC
• Minimum Temperature Of Use After Hardening: 0 Degreec
• Linear Power Of Lamp In W/cm: 300
• Minimum Wavelength Uv-v In Mw/cm - J/cm Requested: 300 - 5
• Spectra Emission Suggested In Nanometer: From 280 to 580
• UV Lamps Suggested: Iron or Gallium
• Hardening time (influenced by UV oven): From 40 sec to 2 min
• Aspect of hard product: Matt transparent like ice
• Density at 25 Degree C gr/cm Cube: 1.1
• Viscosity cps 25 DegreeC 20 r.p.m.(ASTM D2196): 200000-300000 cps

• Application: Construction, Industrial
• Shelf Life: 12 Months, 18 Months, 6 Months
• Color: Floral White, Graphite, Grey, Moss Green
• Form: Powder
• Packaging Type: BOPP Bags, Plastic Packets
• Feature: Accurate Composition, Easy To Process, Filling Of Gaps Of Tiles, Granites Processed, Marbles, Unmatched Quality
• Packaging Size: 0-5 Kg, 10-20 Kg, 20-50 Kg, 5-10 Kg
• Adhesion Properties: Pressure Sensitive

• Brand: 3M
• Packaging Size: 1 kg
• Packaging Type: Bag
• Color: multi
• Country of Origin: Made in India
• Application Industry: Packaging
• Surface Of Application: powder
• Grade Standard: Industrial
• Strength: High

Jemkon’s Grout is a polymer modified cement based tile joint filler. It includes cement, sand, water & additives. Tile Joint filler is used for filling gaps between tiles. Filling joints with Jemkon’s joints filler will provide you a structural support. It also prevents moisture & derbits to penetrate between tiles. We at Jemkon commits to deliver wide range of high quality tile joint fillers to our customers.  Jemkon’s offer unmatched strength & durability from epoxy based joint fillers & cementitious joint fillers. Modern architects & interior designers do prefer our wide range of joint fillers. Features & benefits of joint fillers are –  – Easy to use & clean just add water and it is ready to use – Its crack free, water resistance, minimum shrinkage, chemical resistance, temperature resistance, anti bacterial & anti fungal. – 100% Stain free  – Suitable for tiles & stone – Vitrified tiles, Ceramic, Granite, etc – Strong & durable – Wide range of colour option available

Perma Wide Tile Joint Grout is a polymer modified cementitious material in powder form which just needs addition of water and mixing to form a smooth consistency paste which is suitable for filling wide joints in tiling whether in horizontal or vertical tiling jobs. The product is suitable for indoor application as well as exterior applications. This product makes the wide joints in tiles and stones aesthetically appealing and makes them waterproof. Perma Wide Tile Joint Filler is not only useful in joint filling in new tiling or cladding works but is of excellent utility in repairs and renovation of old structures.

• Working Time:: 90 min @ 20 C

Tiles joint filler Used as a grout for dry tile joints in kitchens, bathrooms, shower stalls, swimming pools, etc.Compressive strength: 38 Nmm2 @ 28 days, Can be used in submerged conditions, Available in a range of attractive colors.