Ultrafiltration Systems Dealers in Chennai (24 products available)

• Brand Name: VEPT
• Color: Grey
• Condition: New
• Automatic Grade: Manual
• Certification: ISO 9001:2008
• Voltage: 220V
• Type: Ultrafiltration System
• Warranty: 1year, 1yr
• Country of Origin: India
• Application: remove suspended solids, colloids and all kind of micro-organisms such as bacteria, viruses, protozoa, germs and larvae.
• Name: Ultrafiltration System
• Product: VEPL
• MOQ: SS 304
• Technology: Membrane
• System: Chemical Wash
• Maintanence: Regular Back Wash
• Industries: All

• Application: Water and Waste Water Treatment
• Packaging Details: Wooden Boxes or As per customers requirement
• Model Number: Customized
• Place of Origin: Tamil Nadu, India
• Supply Ability: 20 Unit/Units per Month

• Condition: New
• Filter Type: Multigrade Sand Filter
• Automation Grade: Automatic
• Capacity: 250-500 litres per hour
• Material: PVDF
• Minimum Order Quantity: 1 Unit

Ultra Filtration units contain capillary tubes that are assembled in membrane housing to filter out suspended solids, bacteria, virus and proteins, based on their size and atomic weight. Ultra filtration membranes commonly applied in water treatment are of two type 1)in to out 2) out to in. Both the units have their own advantages and disadvantages. But the working of the membranes is on common principle of sieving of particles in water. Ultra Filtration membranes are made of different material like PES, PVDF, etc. Ultra filtration units employed are to pre treat the water that is fed to RO systems. The UF filtration of water reduces suspended solids in water, removes colloidal silica and virus, bacteria .Bioworks offer complete automated units for pretreatment of effluent, process waters. Applications Pre treatment to RO Removal of bacteria and Virus Removal of colloidal silica

ABS ENVIRO offers the latest generation Hollow fibre based Ultra filtration systems. Ultra-Filtration membranes typically have pore sizes in the range of 0.01 - 0.10 µm and have a high removal efficiency for bacteria and most viruses, colloids and silt. The introduction of Ultra-Filtration (UF) as a pre-treatment for Colloidal Silica removal, and tertiary treatment for Recycling plant has resulted in several advantages Typical benefits with an UF system include1. Consistently low SDI in the UF filtrate2. Significantly reduced RO membrane fouling and cleaning frequency3. Extended RO membrane life4. Reliable production of high quality water regardless of raw water turbidity5. Higher RO membrane flux6. Smaller footprints lower land acquisition costs7. Lower consumption of operational and cleaning chemicals   Our company is supply of world class Ultra Filtration Plant This system provides tangential flow pressure driven filtration process that helps in efficiently separating particles on basis of their molecular sizes. We are providing ultra filtration plants that are reusable and cleanable with standard chemicals and manufactured using advanced process technology with the purpose of removing micro bacterial counts. The system performs as advanced industrial filtration system and finds application as pretreatment step to the next in step reverse osmosis process.  

We bring forth technologically advanced Wastewater Treatment Plant that is integrated with latest features thus ensure optimum performance. These plants are easy to operate and incur low maintenance cost. The installation is efficiently done by our skilled team so that clients are completely satisfied. Applications : HotelsMallsEducational institutions Housing societies

HATCO offer wide range of UF systems as per customer requirement , we design Ultrafiltration plants for various applications like RO pre treatment, drinking water, ETP, STP and customised requirement. Ultrafiltration is a separation process using membranes with pore sizes in the range of 0.1 to 0.001 micron. Typically, ultrafiltration will remove high molecular-weight substances, colloidal materials, and organic and inorganic polymeric molecules. Low molecular-weight organics and ions such as sodium, calcium, magnesium chloride, and sulfate are not removed. Because only high-molecular weight species are removed, the osmotic pressure differential across the membrane surface is negligible. Low applied pressures are therefore sufficient to achieve high flux rates from an ultrafiltration membrane. Flux of a membrane is defined as the amount of permeate produced per unit area of membrane surface per unit time. Generally flux is expressed as gallons per square foot per day (GFD) or as cubic meters per square meters per day. Ultrafiltration membranes can have extremely high fluxes but in most practical applications the flux varies between 50 and 200 GFD at an operating pressure of about 50 psig in contrast, reverse osmosis membranes only produce between 10 to 30 GFD at 200 to 400 psig. Ultrafiltration, like reverse osmosis, is a cross-flow separation process. Here liquid stream to be treated (feed) flows tangentially along the membrane surface, thereby producing two streams. The stream of liquid that comes through the membrane is called permeate. The type and amount of species left in the permeate will depend on the characteristics of the membrane, the operating conditions, and the quality of feed. The other liquid stream is called concentrate and gets progressively concentrated in those species removed by the membrane. In cross-flow separation, therefore, the membrane itself does not act as a collector of ions, molecules, or colloids but merely as a barrier to these species. Conventional filters such as media filters or cartridge filters, on the other hand, only remove suspended solids by trapping these in the pores of the filter-media. These filters therefore act as depositories of suspended solids and have to be cleaned or replaced frequently. Conventional filters are used upstream from the membrane system to remove relatively large suspended solids and to let the membrane do the job of removing fine particles and dissolved solids. In ultrafiltration, for many applications, no prefilters are used and ultrafiltration modules concentrate all of the suspended and emulsified materials. There are several factors that can affect the performance of an ultrafiltration system. A brief discussion of these is given here. Flow Across the Membrane Surface: The permeate rate increases with the flow velocity of the liquid across the membrane surface. Flow velocity if especially critical for liquids containing emulsions or suspensions. Higher flow also means higher energy consumption and larger pumps. Increasing the flow velocity also reduces the fouling of the membrane surface. Generally, an optimum flow velocity is arrived at by a compromise between the pump horsepower and increase in permeate rate. Operating Pressure: Permeate rate is directly proportional to the applied pressure across the membrane surface. However, due to increased fouling and compaction, the operating pressures rarely exceed 100 psig and are generally around 50 psig. In some of the capillary-type ultrafiltration membrane modules the operating pressures are even lower due to the physical strength limitation imposed by the membrane module. Operating Temperature: Permeate rates increase with increasing temperature. However, temperature generally is not a controlled variable. It is important to know the effect of temperature on membrane flux in order to distinguish between a drop in permeate due to a drop in temperature and the effect of other parameters.

Ultrafiltation is a low pressure membrane filtration to selectively remove suspended and colloidal particles upto a level of 0.001 micron in size. UF is generally used as pre-treatment to RO plants. UF membranes are available in hollow fibre or spiral wound in configuration, we use such membranes from reputed manufacturers.

We are one of the eminent reverse osmosis UF Water Plant manufacturers in India. We supply acme quality Ultrafiltration Water Plant that is rigorously checked by instrumentation and control engineers at each and every stage of manufacturing. These Ultrafiltration plant are manufactured using world class quality raw materials such as steel, iron, plastics, etc. to ensure their durability. Further, they are installed with various technological advanced functions so as to function easily and effectively. We facilitate our clients by customizing ultrafiltration equipments as per the area of its application.

Ultra Filtration Plants are used in PRE-Ro applications  to reduce Turbidity and protect RO Systems, Concentration in Fruit juice / Food Industry, Separation in Oil / Pharma Industry. Ultra Filtration  Plants  are built using Hollow Fibre Membranes to 100KD with  full automatic system. Membranes to other MWCO are used for specific applications. Filtration, Backwash & Flush  – both upward & downward direction and with Air Scouring Facility through Automatic Valves, level  &  pressure controls are provided. Skid Mounted Systems inbuilt with CEB and Dosing Systems. Automation through Auto controller, PLC, HMI, Touch Screen/ Mimic Panel, Scada Technical Details DESIGN BASED ON SOURCE WATER QUALITY, REQUIRED OUTPUT WATER CHARACTERISTICS. FLUSH, FILTRATION AND BACKWAASH – UP & DOWN CYCLIC OPERATIONS CEB SYSTEMS AND DOSING SYSTEMS INBUILT IN SKID LEVEL, FLOW, PRESSURE INSTRUMENTS PROVIDED BUILT WITH OUT-IN FLOW OR IN-OUT FLOW UF MEMBRANES

• Condition: New
• Automatic Grade: Semi-Automatic
• Application: Commercial
• Flow Rate: 500-1000 LPH

Ultra Filtration is a separation process using membrane of pore sizes in the range of 0.1 to 0.001 micron. Typically, Ultra filtration will remove high molecular-weight substances, colloidal materials, and organic and inorganic polymeric molecules

UF Membranes are basically of Poly Ethyl Sulphone (PES) / Poly Vinylidene DiFluoride (PVDF) materials, with MWCO 10k to 150k, to remove a wide range of particulate matters, Turbidity, colloidal materials and pathogens, including viruses and bacteria effectively to enhance the performances of downstream Reverse Osmosis systems. The Advantages of Ultra Filtration Systems are : Optimum control on Silt Density Index which ensures maximum life cycle of downstream Reverse Osmosis membranes. Operating at Low Pressure Maximum Recovery Always at lower energy cost Compact and minimum foot print requirement Reduction on pre treatment chemicals Ecowatech Private Limited offers Skid Mounted, Packaged Ultra filtration system units are designed for a various applications of industrial, commercial and municipal sectors where the priority for the need of high quality treated water. These systems pre-engineered, pre-assembled and factory tested to minimize installation and start-up time. With simple utility connections and easy to set up controls, the unit is ready for on-line service in a shorter time.

Ultrafiltration System, frp filtration systems, remote monitoring equipments

Ultrafiltration System, Gas Chlorinator, Evaporator, Gas Chlorination System

We offer ultra filtration plants as a combination with RO to enhance the life of RO membranes in waste water treatment plants.

HIGH RECOVERY RO PLANT, RO ENRICH MINERAL WATER PLANT

Ultrafiltration System, uf membrane, ultrafiltration membranes

Ultra Filtration Plants, Water Softeners, Water Filters, UV Sterilizers

Ultrafiltration System, agitator assembly, ro water treatment machine

uf plant, Installation, AMC, Operation & Maintenance, uf membrane

ultra filtration, softener, Dm Plants, Reverse Osmosis, nano filtration

membrane ultra filtration system, Steel Ultraviolet Water Filters