Vertical Pumps Dealers in Chennai

• Brand Name: BIMM
• Condition: New
• Automatic Grade: Fully Automatic
• Power: 1-3kw
• Application: PPUMP CONTROLLER
• Voltage: 220V

Operation of Timer based Direct ON Sump pump controller for sump tank and OH tank ·         Fully automatic water level controller connecting sump tank and over head tank maintaining  full OH tank as long as  water available in the sump ·         1 sensor will be put at OH tank at 90% (High)  just below overflow level ·         2 more sensors will be put in sump tank at 10 % just above suction  head called low   and  at 20% called high levels ·         Pump starts  in timer  mode when water is available above 20% in the  sump and OH tank is not Full. Pump runs for the preset ON time OR  stops when water reaches Full before preset ON time. ·         Pump goes to OFF for the preset OFF time ·         Pump also stops if water falls below low sensor in the sump as preventive dry run protection. ·         Pump does not start after preset OFF time if water is not above  2 sensors in the sump ·         Pump  will not start if any of the 3 sensor wires  is broken ·         No airlock or dry RUN since pump stops before water falls below suction ·         It comes with Micro controller Technology, maintenance free magnetic sensors, FR4 doubled sided 1.6mm PCB with green mask and 70 micron thick copper tracks. ·         12 months warranty, direct from manufacturer including controller and sensors  

The immersible motor can operate in flooded conditions, submerged up to 30 feet, for up to a two-week period. The proven concept combines safety of a submersible with the ease of maintenance of an off-the shelf motor. The basic design incorporates a premium-efficiency, inverter-duty TECB (totally enclosed, blower-cooled) motor. If the motor becomes submerged, the blower shuts down without affecting the main motor. While submerged, the media cools the motor just like a true submersible. A special conduit box is used to prevent water leakage into the motor. The motor is designed to prevent infiltration of water along the shaft and into the motor using a patented hydro-seal design.

Being a quality oriented organization, we are involved in providing a supreme quality range of Polypropylene Monoblock Pump. Single / Three Phase Max Flow 100LPM Power 1/2 HP Max Head 9 - 10 MTRS Suction Discharge 25 X 25 MM Sealless Pump Temp 70 Degree Additional Information:Minimum Order Quantity: 1 Piece

Features Non corrosive material of construction Ideal solution for commercial system Designed for continuous duty condition Low noise level Vertical space and piping saving design Ideal solution for flow rate between 1 m3/h to 20 m3/h & maximum operating pressure up to 11 Bar TEFC motor comes with IP 55 protection & Class F insulation Applications Booster system Air-conditioning and cooling system Industrial chilling plants Garden sprinkler, rain water collection CNC lathe machine for component cleaning and cooling Water treatment in RO Water transfer

• Brand: DARLING
• Usage/Application: effluent treatment plants,river cleaning projects and cable trench pits.
• Max Flow Rate: up to 7500 LPM
• Head: Head
• Frequency: 50 HZ
• I Deal In: New Only

• Speed: 3450rpm
• Max. Flow: Upto 530 US GPM
• Max.Suction Lift: 23 ft
• Max.Operating Pressure: 427 psi

C.R.I.’s vertical multistage centrifugal pumps (MV Series) are non-self-priming axial suction and delivery type available with DIN standard for connection. All components like impeller, diffuser & shaft of these pumps are made of corrosion resistant AISI Stainless Steel and designed to deliver the best possible hydraulic efficiency. ‘O’ ring and gasket prevents leakage at the intermediate casing during high pressure. These pumps are powered by a totally enclosed fan cooled. A.C. induction motor, suitable for continuous Duty. The motor stator is made of low watt loss steel lamination assembled under pressure and rigidly locked in the frame.Dynamically balanced rotor ensures vibration and noise free operation. The shaft of Ample size made of quality steel and the precisely ground is used for transmitting rated Horse Power. Thermal over load protector is incorporated in all single phase motors.

• Maximum Discharge Flow: Greater than 5000 LPM
• Brand: Netzsch
• Head: 24 Bar
• Max Flow Rate: 140 m3/hr
• Model: NEMO BT

• Application: Industrial LPG 
• Country of Origin: Made in India
• Brand Name: EBSRAY
• Voltage: 230V
• Motor Phase: 3 phase

• Usage/Application: industrial
• Features: Dimensional fit , Ductile iron pressure , No contact between impeller and pump body

• Features: Compact Pump Design,Simple Pip Work,Energy Efficient
• Brand: LUBI
• Material: Cast Iron
• Phase: Single Phase
• Product Type: Hydraulic

The Flowserve VTP is a single casing, diffuser type Vertical Turbine Pump. Flowserve VTP Pumps are installed in wet-pit or deep well applications where NPSH available is ample. Flowserve manufactures one of the world's most comprehensive fines of mixed flow Vertical Turbine Pumps to ensure the best Pump selection for a wide variety of services.

• Motor Phase: Single Phase
• Power: 0.75 KW
• Number Of Stages: Multi Stage Pump
• Brand: Crompton
• Voltage Band: 180-240
• Inlet Size: 32 mm
• Discharge Range: 1.0-3.5 LPM
• Head Range: 59-33 m
• Outlet Size: 32 mm

Canadian Clear has successfully designed, manufactured, installed and commissioned a number of pumps with State of Art technical know-how to prime industries, fertilizers, hospitals, government and semi-government organizations, off-shore oil rigs, refineries, soft drinks manufacturers, breweries and mineral water manufacturers for various applications.   Vertical High-pressure In-line Pumps 50/60 Hz   APPLICATIONS   CP pumps are employed for general water supply, sprinkling, irrigation and pressure boosting duties for hot and cooling water re-circulation and condensate transport. They are installed in boiler feed circuits, domestic water supply systems, washing plants and filter systems used for fire fighting also.   DESIGN:   Multi-stage, vertical high-pressure centrifugal pumps, with suction and discharge of indentical nominal diameters arranged opposite to each other(in-line design).     BEARINGS   All vertical Centrifugal pumps are supplied with tungsten carbide plain bearing at the hydraulic rotor.   SHAFT SEAL   Cartridge type single mechanical seal.   DRIVE   Electric motor, 50/60 Hz, air-cooled, 2 pole, standard motor other motor makes subject to prior consultation: Single-phase A.C motor, frequency-controlled drives(on request).

Vertical Inline Pumps, Centrifugal Pumps, end suction centrifugal pumps

ccr air lift pumps, Diaphragm Pumps, forced draft evaporators, inlet screens

vertical turbine pumps, Toothed Gear Coupling, Metalic Hoses

vertical pump set, Submersible Pump Set, Open Well Pump, Pressure Pump

Vertical Pumps, Magnetic Driven Pumps, fire pumps

Multi Stage Vertical Inline Pumps kirloskar, Crompton Pumps Mi Three Phase

Vertical Multistage Pump, Industrial Shampoo Pumps, Self Priming Pumps

Vertical Inline Pumps, Jockey pumps, PVC Manhole Covers with Frames

Vertical Openwell Submersible Pump, Stainless Steel Submersible Motor

turbine pump, Vertical Inline Pump, sanitary pump, Back Pullout Pump

Vertical Dredging Pump, Submersible Sludge Pump, Heavy Duty Dewatering Pump