Warehouse Stacker Dealers in Chennai

The machine is a monoblock carton erection with stacking model top load filling The jumbo model is suitably designed to pack relatively bigger size master cartons CLD/Carton bundles to be stacked on an adjustable magazine driven positively Cartons will be erected and presented to filling station along with flap locators Product from end of line is arranged to the matrix size in the matrix table The matrix is pushed to the specially designed receiving plate inside the table The cycle repeats till the CLD is filled with top layer and ejected on completion Bottom and top taping are done by closing minor and major flaps automatically Sturdy base frame and safety covers with polycarbonate and limit switch interlock PLC : allen bradley make with HMI support with fault indication system FESTO/SMC pneumatics / air consumption 20 CFM @ 6 Bar Pr / power : 3 KW Speed depends upon the matrix combination ( effective cycles x matrix size ) Infeed conveyor is with customer scope or supplied by us at additional cost. Safety light curtains (Beam Sensors ) is not a part of the scope which is optional. The machine is versatile and suitable to pack pouches, bottles also Change over parts are as applicable extra

Hand stacker is hand push & hand lift stacker which provides cost-effective handling for both vehicle loading and production areas. Easy maintenance and low running costs.

The rim grip drum lifter handles steel drum styles without complicated adjustments or exchanging attachments. Drums are raised and transported simply by engaging the screw operated rim clamp.Raise drum hydraulically with a foot operated hydraulic pump.Suitable for handling 200L steel drums and 180 degree rotation.

• Motor: Cangzhou Qisheng
• bearing: Harbin
• Arrange ushering bearing: AnhuiQianshan WanshanBrand
• Air cylinder: Tianyuan pneumatic
• Solenoid valve: Tianao Hydraulic factory
• Electrical components: Delixi
• Pneumatic components: Tianao Hydraulic factory
• Computer control system: Cangzhou Aite Science and technology co. LTD

1.The control unit adopts the high quality and high performance PLC man-machine interface and a computer control system of an on-line production management system. 2.Power adopts planet cycloid gear deceleration motor, frequency conversion control can automatically track the speed of conveyor belt production speed and change, realize the energy saving and efficient work requirements. 3.Each section of the belt is equipped with independent power driven, easy to complete the cardboard under different speed, different cutting length education, stack, and accurate count and discharge. 4.The horizontal line of paper roller adopt chain transmission, stable running, easy to maintain. 5.Pile of paper subsection control platform, backboard position can be electric or automatic adjustment, in order to suit different length specifications board, thus ensuring the pile of paper neatly, paper and orderly. 6.The photoelectric control, safe and reliable, piled up neatly. It can realize automatic accumulation, as the cardboard paper on automatic drop slowly. Stack height is 350 mm. 7.The electrical system of intelligent design. Equipped with pneumatic lift plate, landing gear and electric pneumatic pick paper, paper receiving landing gear will decline gradually with the cardboard stack, when accumulated to a certain height, the landing gear on the origin, the pneumatic lifting plate will automatically lift, at the same time electric paper baffle will back some distance, then cardboard smoothly cross out quickly. After a certain period of time (set), the paper will again rise to the top of the landing gear, and electric and pneumatic lift plate paper board return to original state, beginning to stack.

We offer a collection of semi electric stackers  in different models for use in  automobile industries, logistics,  steel plants and also for many other industrial applications. Our semi electric stackers are less power consuming, have low maintenance cost and can be customized as per the requirements of our clients. Features: Hard chromed, polished pistons that are resistant to rust, scratches and wear. Double sealed high pressure polyurethane oil seals. To ensure long life of the hydraulic system. Ergonomically designed steering handle to prevent leakage. To reduce pulling power and minimize operator fatigue. Light and compact Construction. Specification: Load Capacity-1000 – 2000 Kgs Maximum Lift Height – 1600mm to 3600mm Minimum Lift Height – 90mm Lower Speed – Continuously Variable Wheels – Nylon / Polyurethane / Cast Iron Fork Size – 1150X560 LXW(adjustable)

In the management of a maritime hub or an inland port, you have to know the weight of the containers moved through the indispensable binomial transport with safety. Today, directly from the driver seat, you can manage the goods that your machine moves, weighing, storing and classifying them by type, by customer, by destination up to print their loading movements data or receive them remotely on a smart phone or tablet by using VEI ipotweb.com platform. Advantages The load is detected through the reading of the lifting pressure. No structural changes to the machine are introduced, keeping the nominal accuracy and the operational standards unchanged.

• Power Source: Manual
• Type: Fork Stacker
• Brand Name: SSE
• Application: Goods Lifting
• Material: Mild Steel 
• Rated Load: 1000,1500Kgs
• Lifting Capacity: Upto 1500 Kgs 
• Weight Kg: 210-240Kgs
• Fork Length(mm): 600-1500
• Fork Width(mm): 280-1100
• Height(m): 1200-3000
• Is It Customised: AVAILABLE
• Lifting Height: 1200-2000 mm

• Fork Length: 900 mm 1150 mm (customized)
• Brand Name: hi power
• Rated Load: 300 kg to 2000 kg
• Fork Width: 390 mm 750 mm adjustable type, (customized)
• Height: 4 feet to 12 feet
• Minimum Order Quantity: 1 Piece

Model HS  E 1.5/16 HS  E 2.0/16 HS EH1.0/3.0 Rated Lifting Capacity (kg) 1500 2000 1000 Max.Lifting Height(mm) 1600 1600 3000 Lowered Height of Forks (mm) 85 85 90 Fork Length (mm) 900 900 900 Adjustable width of forks (mm) 360-750 360-750 360-750 Lifting speed (mm/stroke) 20 20 14 Lowering Speed (mm/stroke) controllable controllable Controllable Outer width of front leg (mm) 750 750 750 Front wheel Size (mm) 78x70 78x70 78x70 Real wheel size (mm) 180 x 50 180 x 50 180 x50 Overall Size (mm) 2100x750x1480 2100x750x1480 2100x750x1420 self weight (kg) 247 247 247

• Type: Fork Stacker
• Brand Name: Dhanasree Hydraulics
• Material: Metal
• Min Capacity: 1000 Kg
• Max Capacity: 2000 Kg
• Load Centre: 500 mm
• Finish: Coated

• Lifting Capacity: 0-2 Ton
• Fork Length: 900mm
• Power Source: Electric
• Height: 3200 MM
• Overall Width: 800mm
• Distance between fork arms: 570/685mm
• Mast Height: 1950mm

• Features: Longer functional life, Robust construction, Excellent performance

We are renowned as one of the stupendous Semi Electric Stacker Manufacturers & Exporters from India. Our Semi Electric Stackers are available in varied sizes and dimensions meeting the requirements of the applications. Compact design with strong steel construction.A robust Fork Lift with strong support arms and mast for minimal bending, safe lifting and long life.Simple and convenient lifting operating system.Light and easy manual steering systems, fitted with a parking brake.Smooth control of lifting and lowering for high precision.Energy saving and regenerative, safe and efficient.Special designs are available according to customers' requirements.Designs and specifications subject to alterations for sake of improvement without noticeAll dimensions are in mm unless otherwise specified.Copy of this literature or any part of it, is strictly reserved

We provide widely demanded Battery Operated Stacker at competitive prices. The Battery Operated Stacker we offer is made using the best quality material and is widely appreciated for its smooth functioning. Our Battery Operated Stacker is ideal for handling light to medium duty applications. Attributes Hassle free performanceTough constructionLow maintenance costEase of handlingSafe operationsRust proofWear and tear resistant Product Details Capacities500 kgs1000 kgs1500 kgsHeight1200 mm6000mm Used For Loading trucksUn-loading trucks

• Fork Length: 1150 mm
• Material: MS
• Capacity: 0-1 Ton
• Fork Width: 740 mm
• Power Supply: AC

HYDRAULIC STACKER - FULLY ELECTRIC Type Code (Fully Electric) VXHS-10002500 FE VXHS-15002500 FE Capacity 1000 kgs 1500 kgs Lifting Height 2500 mm 2500 mm Handle Height 1385 - 1405 mm 1385 - 1405 mm Also Available Fork Length x Width 1125 mm x 570 mm 1125 mm x 570 mm VXHS - 10003000 FE Load Centre 500 mm 500 mm VXHS - 10003500 FE Min. Turning Radius 1700 mm 1700 mm VXHS - 15003000 FE Driving, Lifting Motor 24v 2.4 kw, 24v2.3 kw 24v 2.4 kw, 24v2.3 kw VXHS - 15003500 FE Battery 24 v 240 - 240 Ah 24 v 240 - 240 Ah VXHS - 20002500 FE Overall ( L x W x H ) 2040 x 856 x 1770 mm 2040 x 856 x 1770 mm Net Weight ( approx. ) 858 kgs 888 kgs

Full Electric Stacker offered finds application in fulfilling complete material handling and lifting requirements of the customers. These find usage in different industry sectors like Ceramic Industries, Cement Industries, Automobile Industries, Bottling Plants, Chemical Industries and others and meet complete material handling & lifting application requirements. Further, these electric stackers also feature heavy-duty design comprising reinforced frame chassis, high tensile mast structure as well as easy to use tiller handle that makes these user friendly machines.

• Type: Hand stacker
• Brand: ACE
• Usage/Application: Material Handling

• Brand Name: Cones
• Warranty: 12 months
• Lifting Capacity(kg): upto 1000kgs
• Fork Length(mm): 1000 mm
• Fork Width(mm): 760 mm
• Height(m): 90mm - 3000 mm

• Type: Counter Balance Stacker
• Lifting Capacity: 2 Ton
• Material: Mild Steel
• Fork Length: 900 mm
• Warranty: 12 months
• Country of Origin: Made in India
• Usage/Application: Material Handling
• Height: 1600 mm

• Color: Brown
• Brand Name: KARUNYA
• Shape: Square
• Pattern: Plain
• Minimum Order Quantity: 1 Unit

We are offering semi electric stacker.

We provide a wide gamut of high quality hydraulic stackers that is suitable for loading, unloading, carrying & stacking of materials in a factory. Our manual hydraulic stacker is available in a range of 250 kg to1500 kg capacities & with lift height 1000mm to 4000mm. Manual hydraulic stacker is fabricated of pressed formed or rolled steel sections. We are well reckoned as one of the ecstatic electric hydraulic stackers manufacturers, based in India. We deliver manual hydraulic stacker at very competitive prices that suit the budget of all.

• Capacity: 1000 kgs
• Fork Length: 1150 mm
• Country of Origin: Made in India
• Model: MHS 1030
• Max.Height: 3000 mm
• Load Center: 500 mm
• Lowered Fork Height: 90mm
• Width Over Forks: 550 mm
• Height Mast Lowered: 2080 mm
• Brand: JOSTS
• Usage/Application: Industrial

• Type: Pallet Stacker
• Lifting Capacity(kg): 100-150
• Capacity: 200KG, 400KG
• Dimension: 1100x580x1620mm

ur domain expertise has enabled us to come up with an excellent collection of Hydraulic Stacker. To manufacture these trolleys, we make sure that qualitative material is used by our experienced professionals. In addition to this, we customize the offered range as per the specifications detailed by our esteemed customers. Features: • Easy to move• Durable• Abrasion resistant

• Features: Heavy duty Traction battery, Emergency power disconnect switch, Germany FREI handle, Forklift profile for mast building, Wide view mast, AC electronic controller PGDT/Curtis
• Brand Name: Technolift
• Load Capacity: 1000 Kg
• Load Center: 500 mm
• Model: TSS10BF - FFL
• Lowered Fork Height: 90 mm
• Free Lift: 1550 mm
• Overall Length: 1720 mm

• Usage/Application: Bulk Material Terminals
• Brand Name: Ferron Equipments
• Power Source: DC
• Capacity: 0 - 3 Ton
• Fork Length: 1150mm
• Fork Width: 360mm
• Height: 1580mm
• Lifting Height: 2000mm
• Warranty: 12 months
• Color: Deep Orange,Yellow,Red
• Model: FES_1.0T
• After Sales Service available: Yes
• Battery Voltage: 24V
• Front Wheel Distance: 339mm
• Load Center: 400mm
• Turning Radius: 1620mm
• Weight: 690Kg
• Number of motors: 2 nos
• Max Machine Height: 2560mm
• Max Speed Without Load: 4.5 - 6 Km/Hr
• Max Speed With Load: 4 - 5 Km/Hr
• Lifting Motor: 24V/2
• Overall Width: 860mm
• Overall Length: 2000mm
• Width Over Forks: 570mm
• Wheel Base: 1340mm
• Driving Motor: 24V/1.2 - 3KW

• Design speed: 100m/min.
• Working width: 1800mm.
• Stacked cardboard maximum length: 2400 mm.
• Cardboard maximum stack height: 500 mm.
• Gas supply: 0.4-0 .9 Mpa.
• .Operating direction: Left or Right Mobile phone ( to be determined according to customer plant )

.The control unit adopts the high quality and high performance PLC man-machine interface and a computer control system of an on-line production management system.   2.Power adopts planet cycloid gear deceleration motor, frequency conversion control can automatically track the speed of conveyor belt production speed and change, realize the energy saving and efficient work requirements.   3.Each section of the belt is equipped with independent power driven, easy to complete the cardboard under different speed, different cutting length education, stack, and accurate count and discharge.   4.The horizontal line of paper roller adopt chain transmission, stable running, easy to maintain.   5.Pile of paper subsection control platform, backboard position can be electric or automatic adjustment, in order to suit different length specifications board, thus ensuring the pile of paper neatly, paper and orderly.   6.The photoelectric control, safe and reliable, piled up neatly. It can realize automatic accumulation, as the cardboard paper on automatic drop slowly. Stack height is 350 mm.   7.The electrical system of intelligent design. Equipped with pneumatic lift plate, landing gear and electric pneumatic pick paper, paper receiving landing gear will decline gradually with the cardboard stack, when accumulated to a certain height, the landing gear on the origin, the pneumatic lifting plate will automatically lift, at the same time electric paper baffle will back some distance, then cardboard smoothly cross out quickly. After a certain period of time (set), the paper will again rise to the top of the landing gear, and electric and pneumatic lift plate paper board return to original state, beginning to stack.