Water Bath Shaker Dealers in Chennai

Water Bath shaker units are double walled with exterior body and inner chamber of stainless steel having effective insulation in between at hat does not allow the loss of heat for longer period of time. Double walled chamber, inner chamber made of stainless and outer fabricated out of cold roller mild steel sheets duly finished in attractive powder coat point. The pyramid-Cal lid is also made of stainless steel prevents falling of condensed water droplets on the inner space between the two walls is tightly packed with special grade glass wool in order to prevent thermal losses. Heating is achieved by immersion type heater and the temperature is controlled by hydraulic type thermostat within the operating range from Ambient +5oC to 95oC. The bath is provided with an oscillating tray riding on ball rollers oscillated through a gear variable speed motor. Shaking speed range is between 40 to 140 cycles per minutes. The shaking tray can either hold test tubes or conical flasks of 25 ml to 1000 ml as ordered by the users. Supplied completed with one shaking tray and cord and plug. Designed to work on 220 /.230 volts AC.Temp. Range : Ambient + 5o C to 90o C

• Frequency: 50 Hz
• Material: Aluminum
• Voltage: 220V
• Brand: Penta

Inner is made of SS-304 & outer fabricated out of cold rolled MS sheets with powder coating. The paramedical lid is made of SS prevents falling of condensed water droplets on the specimens. The inter space between the two walls is tightly packed with special grade glass wool in order to prevent thermal losses. Heated by energy efficient heaters & controlled by microprocessor based digital controller with LED display with RTD sensor. The bath is provided with an oscillating tray riding on rollers oscillated through a PMDC motor for continuous operation. The shaking tray can either hold test tube or Erlenmeyer flask of capacity 25 ml. or 50 ml. or 100 ml. or 250 ml. or 500 ml. or 1000 ml. as ordered by the users. Electronically controlled shaking mechanism provides quick reciprocating motion & speed control. The unit is fixed with DC drive for speed range from 20 ~ 200 cycles per minute. Built in front control panel accommodating all the controlling device located at the side of the bath for operational convenience. COOLING OPTION: CFC pre refrigeration system provided at the lower portion for controlling the temperature from 0 ~ 100°C TECHNICAL SPECIFICATIONS:     Inner chamber size : 405 x 300 x 150 mm   Holding capacity: 250 ml. x 9 nos. conical flask   Temperature range: 0 ~ 100°C ± 0.5°C   Shaking speed: 40 ~ 140 cycles   Power rating: 2.5 kw (app.)   Operating voltage: 220 ~ 230 V single phase 50 cys     OPTIONAL: Spare shaking tray for holding:   12 nos. x 100 ml. conical flask or   9 nos. x 250 ml. conical flask or   5 nos. x 500 ml. conical flask or   35 nos. x Ø 25 mm test tubes    

• “MIGHTY INSTRUMENTS” The purpose of a water bath shaker is to steadily shake and mix samples while maintaining a constant temperature. They are used for application such as culturing cells, hybridization, and molecular biology assays. • The bath is provided with an oscillating tray riding on ball rollers oscillated through a gear variable speed motor • Heating is achieved by immersion type heater

Bath has an oscillating tray riding on ball rollers oscillated through a geared variable speed motor. Fitted with PMDC heavy duty motor for continuous operations. Shaking tray can either hold test tubes or Erlenmeyer flasks of 25 ml or 50 ml or 100 ml or 250 ml or 500 ml, as ordered by the users.(Kindly mentions the capacity of the flasks while ordering). Supplied complete with one shaking tray as a standard accessory. Supplied with GABLED DOME LID for dripping of all condensate into the bath inside periphery Fitted with THYRISTOR BASED DC DRIVE for speed range form 40 to 140 cycles per minute. To work on 220 / 230 V. A.C. supply. Double walled construction. Space between the walls is filled with special grade mineral wool in order to avoid thermal losses. Speed regulator is provided on the front panel to control the shaking motion. MOC (Inner): Inner bath chamber and lid made of Stainless Steel (SS-304 grade). MOC (Outer): Outer chamber is made of Mild Steel duly powder coated.

These Reciprocating Water Bath Shakers Are Available In .three Models Model WBT-200 Small Platform 250x300mm, Model WBT-400 Large Platform 300x400mm & Model .WBT-401 Refrigerated To 0°C ,Temperature Control Is Precise Temp. Range Of 5°C Above Ambient To 100°C, Speed Range 20 - 200 Rpm, Heat Loss And Evaporation Minimized With Use Of Stainless Steel Hood .cover Easy Emptying Through A Drain .at The Lowest Point Micro Processor Temperature PID Controller With Dual Display Of Measured Temperature And Set .temperature

• Material: Mild Steel
• Application: Heating With Shaking
• Voltage: 230V
• Brand Name: Everflow
• Shape: Rectangular
• Capacity: 25 Litres
• Temperature Range: Above Room temperature to 70deg C.
• platform Size:  275 X 275 X 150 mm

Water Bath Shaker, Autoclave, Seed Germinator, Melting Point Apparatus

Water Bath Shaker, Crystal Growth Bath, Industrial Oven, Incubator Shaker

Water Bath Shaker, industrial tray dryer, Medical Equipments, Heating Mantle

Water Bath Shaker, Microprocessor Ph Meter, Stability Chamber

Water Bath Shaker, cold chamber, Pour Point Test Cabinet

Servo Water Bath Shaker, Sensor & Temperature Controllers

Water Bath Shaker, Aluminum Horizontal Rack, Carbondioxide Incubator

Above Ambient Orbital Water Bath Shakers, Water Cooling System, hot chambers