Wrenches Dealers in Vadapalani, Chennai

A Cam Shaft LH and RH has one or more Cams attached to it. This is generally connected to the Piston which transmits the power. The power is produced by the internal combustion engine. Some engines rely on a single Camshaft per cylinder bank, which is known as a single overhead Camshaft (SOHC). Most engines are driven by a two Camshafts per cylinder bank arrangement (one camshaft for the intake valves and another for the exhaust valves) such Camshaft arrangement is known as a double or dual overhead CAM (DOHC). Thus, a V engine, which has two separate cylinder banks, may have four Camshafts (colloquially known as a quad-cam engine).

A Cam Shaft LH and RH has one or more Cams attached to it.   This is generally connected to the Piston which transmits the power.   The power is produced by the internal combustion engine.   Some engines rely on a single Camshaft per cylinder bank, which is known as a single overhead Camshaft (SOHC).   Most engines are driven by a two Camshafts per cylinder bank arrangement (one camshaft for the intake valves and another for the exhaust valves) such Camshaft arrangement is known as a double or dual overhead CAM (DOHC).   Thus, a V engine, which has two separate cylinder banks, may have four Camshafts (colloquially known as a quad-cam engine).We AEC produces camshafts or Earthmovers which have only one cam at one end and the other end is machined with grooves.   This is done with extreme precision for distribution of power through the wheel.   We use SG Iron for the Manufacturing of the Camshaft RH and Camshaft LH.   These Camshaft RH and Camshaft LH are used in Earthmover. One of our highly esteemed customer is Caterpillar, other companies include Tafe (Earthmovers).

A Cam Shaft LH and RH has one or more Cams attached to it.   This is generally connected to the Piston which transmits the power.   The power is produced by the internal combustion engine.   Some engines rely on a single Camshaft per cylinder bank, which is known as a single overhead Camshaft (SOHC).   Most engines are driven by a two Camshafts per cylinder bank arrangement (one camshaft for the intake valves and another for the exhaust valves) such Camshaft arrangement is known as a double or dual overhead CAM (DOHC).   Thus, a V engine, which has two separate cylinder banks, may have four Camshafts (colloquially known as a quad-cam engine).] We AEC produces camshafts or Earthmovers which have only one cam at one end and the other end is machined with grooves.   This is done with extreme precision for distribution of power through the wheel.   We use SG Iron for the Manufacturing of the Camshaft RH and Camshaft LH.   These Camshaft RH and Camshaft LH are used in Earthmover. One of our highly esteemed customer is Caterpillar, other companies include Tafe (Earthmovers).

• Type: Pipe Wrench
• Material: Mild Steel
• Length: 10inch, 12inch, 14inch, 18inch, 24
• Weight: 2
• Color: ORANGE
• Open Style: Single
• Surface Finishing: Non Polished
• Feature: Best Quality
• Automation Grade: Manual
• Size: 10 INCH
• Brand Name: GROZ
• Application: Pipe Fittings

Adjustable Click-Type Metric Torque Instruments Newton Meter Torque Instruments Ratchet Repair Kits (QD Series) US Torque Instruments (ft. lb.) US Torque Instruments (in. lb.) Adjustable Click-Type Torque Wrenches, Tq Series Metric Torque Wrenches with Conversion Scale Newton Meter Torque Wrenches with Conversion Scale Ratchet Repair Kits (TQ Series) US Reading Torque Wrenches with Conversion Scale Electronic Bench Top Torque Testers Horizontal Torque Testers and Transducers Torque Comparator Electronic Torque Tester And Calibrator Accessories Calibration Wheels / Arms Electronic Torque Tester and Calibrator Force Testing Equipment Joint Rate Simulator Adaptors Transducers TTC2000 / TTC2800 System Components Weight Hangers / Trays Weight Sets Electronic Torque Wrenches Electronic Dial-Type Torque Wrenches ELECTROTORK® Torque Wrenches Geared Head Multipliers Geared Head Multipliers Geared Head Multipliers-X4 Models Reversible Air Motor Interchangeable Head, Click-Type Torque Wrenches Box End Heads, 12-Point, inches Box End Heads, 12-Point, mm Flare Nut Heads, 12-Point, inches Flare Nut Heads, 6-Point, inches Flare Nut Heads, 6-Point, mm Open End Heads, inches Open End Heads, mm Ratcheting Box End Heads, 12-Point, inches Ratcheting Box End Heads, 12-Point, mm Square Drive Heads / Fixed Square Drive Heads / Ratcheting Torque Wrench Bodies / Adjustable Torque Wrench Bodies / Adjustable / Dual Range Torque Wrench Bodies / Pre-Set T Handle Torqometer® Torque Wrenches Combination U.S./Metric Reading - Standard 2% Accuracy U.S. Reading - Standard 2% Accuracy Techwrench® Torque Wrenches Memory Models / 1% Accuracy / Ratcheting / Flex Head Memory Models / 4% Accuracy / Interchangeable Head and "D" Models Standard Models / 2% Accuracy / Fixed Head Standard Models / 2% Accuracy / Flex Head Standard Models / 4% Accuracy / Interchangeable Head and "D" Models TECHANGLE Models / 2% Accuracy / Ratcheting / Fixed Head TECHANGLE Models / 2% Accuracy / Ratcheting / Flex Head Torqometer® Torque Drivers - 1/4" Drive Combination U.S./Metric Reading - Standard 2% Accuracy - 1/4" Combination U.S./Newton Meter Reading - Standard 2% Accuracy - 1/4" U.S. Reading - Standard 2% Accuracy - 1/4" Torqometer® Torque Wrenches Combination US/Metric Reading-Standard 2% Accuracy? Combination US/Newton Meter Reading-Precise 1% Accuracy Newton Meter Reading/Standard 2% Accuracy Tubular Extension Handles (TE/TESI/TER/TEC Series) US Reading- Standard 2% Accuracy-Industrial Finish US Reading-Standard 2% Accuracy Torque Angle Gauges Torque Angle Gauges Torque Screwdrivers Adjustable Torque Screwdrivers Adjustable Torque Screwdrivers (1/4" drive) Preset Torque Screwdrivers Torque Limiting Drivers Torque Testers Digital Torque Testers (DTT Series) Electronic Torque Testers Versatest™ Electronic Torque Tester Accessories VERSATEST Versatorq™ Electronic Metering/Data Acquisition System Torque Acquisition Meters VERSATORQ1® Sensors VERSATORQ1® System Accessories

Wide range of torque tools to suit almost all applications High accuracy [+/- 0.5%] Calibration transducers. Norbar India is the first OEM to have established NABL Accredited calibration laboratory (upto 6780 Nm)

In a rotating shaft at which instability occurs is called whirling or critical speed. When shaft reaches critical speed it will have maximum deflection. It is applicable in power transmitting equipments like turbine, propeller shafts, etc. Product Code : SAMS DYN - 004

elevator shafts, building construction material supplies, Concrete

Steering Shaft, Helical Gear, Sprocket, Fine Pitch Precision Gears

Shafts, Gearboxes, Post Hole Diggers, rotary tillers blades

Adjusting Wrench, Fleece Sanding Discs, angle polisher, Flap Wheel

Main Shaft, Gear Blank, forged machinery part, ball valve body adapter

CNC Turned Shaft, Spare Roller, Gravity Roller, Welding Jig

Turbo Charger Shaft

shaft, Automobile Parts, King Pins, propeller shaft components

Crank Shafts, Connecting Rod