Withdrawal Sleeves Dealers

We offer curring oven. Photo of uncured busbar with 'rachem sleeve.

We are the main supplier of this product.

Sleeves or Spiral Bands are spirally wound single ply of coated abrasive used on expanding rubber drums. The unique construction of sleeves provides smooth, chatter-free operation, thereby giving the operator greater control of the tool. Sleeves are ideal for grinding, blending, deburring, smoothing, finishing & polishing a wide variety of flat & contoured metal surfaces including the inside of holes & other hard-to-reach areas. Sleeves are also effective on hardware with contours or intricate shapes.

Prominent manufacturer of Bearing Withdrawal Sleeve. It is used to fix bearings with a tapered bore on supported shafts (lean), the shaft must have a thread so the nut can move the sleeve against the bearing.

Withdrawal sleeves product codes start with AH or AHX. The X refers to a DIN revision index, which has now become standard. The product codes for withdrawal sleeves with oil grooves and oil ducts use the letters AOH or AOHX. Withdrawal sleeves whose product codes contain AOH or AOHX always have oil ducts in the bore and on the taper.

We are known for our Metal Withdrawal Sleeves E.N. 8, which are available in different sizes, diameters and other technical specifications. Dismounting of bearings is possible with the help of these sleeves. Moreover, these sleeves can be operated at high speed and can also captivate heavy loads. Our Withdrawal Sleeves are also offered to the customers in required quantity.

Our organization is one of the reputed processors of large range ofNatural Rubber Sleeve. these are very soft and flexible. they has a tendency of abrasion resistance. they have a high degree of insulation properties such as protecting from hot and cold. they are used in lots of machinery auto appliances. they are providing good damping performance and has low maintenance. Features : * Durable * Very soft * Damping performance Specifications : * Temperature Range : Upto 60oC * Rated Voltage : 600

Withdrawal Sleeve are suitable where bearing with the tappered bore are to be located on cylindrical shafts. The tapered sleeve is pressed into the bearing bore until the required reduction in radial internal cleaerance is achieved. The bearing is abutted, for example against a shoulder on the shaft. The tensile strength of material atleat 430N/mm2. The outside surface of the sleeve has a taper of 1:12, in series AH240 and AH241 tapper is 1:30.

CNC sleeves are hardened steel and ground internally and externally, With either clamping slots or clamping screws in them. This CNC sleeve also Ensures the boring bar is on the correct center height of the CNC lathe. Customized design can be supplied upon request. We stand as one of the prominent, Wholesaler, Retailer, Trader, Distributor and supplier of Sleeves. These are highly appreciated for their superior performance and are known for their optimum quality. Our range of sleeves is designed to withstand extreme conditions. These are offered at affordable rates. These find their usage in different industrial application including Cement industries, Steel industries, Power industries, Engineering industries and other industries. Features : Appreciated for their superior performance Usage in different industrial application 

Withdrawal sleeves product codes start with AH or AHX. The X refers to a DIN revision index, which has now become standard. The product codes for withdrawal sleeves with oil grooves and oil ducts use the letters AOH or AOHX. Withdrawal sleeves whose product codes contain AOH or AOHX always have oil ducts in the bore and on the taper. Sleeves with the code numbers 240.. and 241.. have a 1:30 taper, all the others have a 1:12. Suffixes Since 1997, there have been withdrawal sleeves with the suffix G. The G indicates a change of thread size. With withdrawal sleeves and adapter sleeves having different thread sizes, attempts have been made to standardise them. These standardisation efforts are inspired by a desire to reduce nut variation.

• Material: Cast Iron
• Country of Origin: Made In India
• Shape: Round
• Usage/Application: Forklift Part
• Thread Type: Half Threaded
• Size: 2 Inch

Applications Van Beest offers a wide range of sleeves, in both aluminium and carbon steel. Range Aluminium wire rope sleeves are manufactured according to DIN 3093 A. For safety in fabrication and application our sleeves are of seamless construction corresponding with the requirements of DIN 3093 A regarding material composition and mechanical properties. Prescon carbon steel sleeves are manufactured from carbon steel and feature the Swaging Verification System in which the colour changes intensity after swaging. This system helps the sling manufacturer to determine whether or not the sleeve has been pressed. The sleeves are of seamless construction and fit industry standard dies. Design Aluminium sleeves are self coloured. The smaller dimensions of Prescon sleeves, up to and including 16 mm, are colour coded, larger dimensions are self coloured. \

Sleeves can be used on plain shafts allowing the bearing to be positioned as required and locked into place or on stepped shafts with a seating ring to set the bearing off a shoulder before locking it into position, We have in different kind of makes like MTN, RAJA and etc.,

Both the Adapter and the Withdrawal Sleeves have cylindrical bore and tapered outer surface, with threading on one side of the outer surface, and are slit along the length. While the Adapter Sleeve has the threading on the small diameter side of the taper, the Withdrawal Sleeve has the threading on the larger diameter side. Thus, the Adapter Sleeve facilitates easy mounting of the bearing, while the Withdrawal Sleeve is normally used to ensure easy dismounting of the bearing, hence it's name. An Adapter Sleeve assembly consists of the Sleeve, a Lock Nut and a Lock Washer, because the Lock Nut is needed first to drive the bearing up the tapered sleeve, and then to lock it in position with the help of the Lock Nut. A Withdrawal Sleeve, on the other hand, does not necessarily need the Lock Nut and the Lock Washer for it's assembly with the bearing and the shaft, and hence is supplied without them. However, a Withdrawal Nut may required to remove the Withdrawal Sleeve from the bearing, and in that case, it has to be ordered separately.

This is used to mount tapered bore bearing on to a cylindrical shaft with diameter tolerances. To secure the bearing to the shaft, press the withdrawal sleeve into the bearing bore. When using larger bearings, considerable force is required to overcome the friction between the mating surfaces of the bearing and sleeve and of the sleeve and shaft.

• Color: Silver
• Material: Stainless Steel
• Finish: Polished
• Pack Type: Box
• Pack Size: 50 Piece
• Grade: 316

• Material: Cast Iron

Withdrawal Unit with Gear Box offered are attached to the stand on a common base with main frame of welded steel construction so as to provide for durable finish quality. These units come with top rolls that are hydraulically adjustable as well as bottom rolls that are mounted on the frame. For superior functional value, these rolls are made of heat-resistant steel where each comes fitted with self-aligning spherical roller bearing, sealing ring and cover option mounted in the bearings housing.Features:    Features long-working life and easy to operate options Can be made available in different rod sizes including 10 To 30 mm