Fiber Optic Converter Dealers

Introduction: model277 is one kind can offer rs-232485422 serial port carry transparent optical fiber modem of transmission to get end to user, no need patch cords set up, switch over automatically, and can detect and examine the signal speed automatically, zero delays time to transmit automatically. model277 adopt optic fiber transmit, have isolate protection, data privacy is fine, working steady, data, such threats to communication equipment as the wave is welled up and interfered with electromagnetically that the effective one has prevented the abominable environment from being struck by lightning, can work in the abominable and dangerous environment reliably. Can be used in occasions such as various industrial control, course controlling, traffic controlling and intellectual district , especially suit the bank, electricity and interfering with environment department and system with the special requirement electromagnetically. Features: 1. Extend rs-232485422 transmission up to 120km with single-mode 2. Transmit asynchronously, point to point, speed reach 500kbps 3. Examine signal speed automatically, zero delay time 4. Plug-and-play(hot-pluggable, data format auto-sensing & self-adjusting) 5. Support rs-232485422 interface type, but only one rs-232 rs-485 rs-422 port can be connected at a given time 6. 9~36vdc power supply input(2 bit terminal block) specifications: rs-232485422 standards: eia rs-232c, rs-485, rs422 standard rs-232 signal: out(tx), in(rx), gnd rs-422 signal: t+, t-, r+, r-, gnd rs-485 signal: d+, d-, gnd working mode: asynchronism, point to point or multi point, 2 wire half-duplex,4 wire full duplex baud rate:0~115.2kbps, auto test serial signal rate detect signal speed automatically, zero delay time transfer distance: rs-485422 side:1.2km(9600bps) rs-232 side: no less than 5m max number of drops: 128 nodes(rs-485422)

• Country of Origin: India
• Type: Fiber Optic Converter
• Material: Fibre
• Application: Optic Converting, HD Video AHD CVI TVI Fiber Optical Converter
• Feature: Easy To Use, Stable Performance
• Power: 10W
• Supply Voltage: 0-3VDC
• Number Of Ports: 8
• Optical Transmitter Receiver: 20KM
• Support: RS485, RS232 data protocol
• Package Dimensions: 8 x 7 x 5 cm; 500 Grams
• Cable Type: ‎Coaxial

A Serial To Fiber Optic Converter is a simple networking device that makes it possible to connect two dissimilar media types such as twisted pair with fiber optic cabling. They have been in use for over two decades now, and are important to connect fiber optic cables to the conventional copper wire cables. They are also used in Metropolitan area networks (MAN). It has numerous hardware networking applications. We have a growing customer base for the converters.   Essential Points Interface : RS-232/RS485/RS422       Interface Speed Rate : Maximum up to 115.2 KBPS       Transmission Line : Dual Multi-Mode       Transmission Distance : 2.5 Miles Multi-Mode glass fiber       Optic Wavelength : 820 mm       Supply : 9~12 VDC       Working Environment : -20oC ~ 60oC, 10% ~ 90% RH

• Brand Name: SANDS,SANDS
• Application: ETHERNET TO FIBER OPTIC MEDIA CONVERTER
• Wavelength: 1310nm or 1550nm
• Speed: 10BaseT : 10 / 20Mbps for half / full-duplex 100BaseT : 100 200Mbps for half / full-duplex
• Country of Origin: INDIA

SANDS Ethernet to Fiber Optic Media Converter is a rugged, industrial-grade 10/100M Ethernet to Fiber Optic Media Converter, which provides one channel for media conversion between 10/100BaseTX and 100BaseFX. It supports either multi-mode or single-mode fiber optic and MDI (straight-through) and MDIX (crossover) cables. The converter doesn't use DIP switch, jumper settings, or software drivers, making the unit highly reliable and a truly plug-and-play device. It features auto-negotiation for half or full-duplex and 10Mbps or 100Mbps data rates.

• Type: Bevel Gear

Description: Jonard Tools FS-616, Fiber Scribe, 6Mm Wide Flat Blade, 35 Deg. Bevel EdgeFeatures: Designed with a 35° beveled edge and 6 mm wide carbide blade, this fiber optic scribe is the perfect tool for scribing optical fiber. This scribe features the following: 6 mm wide carbide steel blade can cleave large diameter fiber and miniature rod-shaped lenses Durable anodized aluminum housing provides a comfortable and durable grip Ideal for “scratch & pull” technique of scribing fiber Specifications:

• Features: Works with both trunk lines and drop lines,Allows operation at higher speeds for specific distances
• Specifications: Up to 12km fiber lengths ,CAN 2A, CAN 2B, and remote frame support

WRC CAN bus Extenders boost signal levels, allowing longer cable lengths, longer trunk lines, and longer drop lines without sacrificing network speed. CAN bus Extenders permit maximum network speed and throughput on CAN, J1939, or DeviceNet network devices, resulting in better control of the process. In addition extenders require no configuration when used in DeviceNet applications as they are configured for autobaud operation Comes with the standard two-year Western Reserve Controls warranty

• Weight: ‎349 G
• Product Dimensions: ‎9.45 x 7.3 x 2.7 cm; 349 Grams
• Mounting Hardware: ‎10/100Mbps Single-Mode Media Converter
• Wattage: ‎2.5 Watts
• Connector Type: ‎Ethernet, RJ45
• Number Of Items: 1

• Brand Name: EKS
• Weight: 570 g
• Material: Stainless steel
• Model Name/Number: DL-422/13-MM-ST RS422/MM
• Temperature: -40 DegreeC to +70 DegreeC (Multimode and Singlemode with ST or SC), -20 DegreeC to +55 DegreeC (all others)
• Voltage: 12 - 30 VDC
• Fiber Mode: Multimode 62,5 (50)
• Dimension (W x H x D): 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector)
• Data Rate: Point-to-point structure: 1.5 MBit/s max. / Line topology: 1.5 MBit/s divided by no. of DL422 system
• Status-LEDs: Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow
• Transmission Type: Duplex
• FO-Connector: ST, SC or SC-BIDI
• FO Range: 5 km (1 dB/km)
• RS422 Connector: 9-pole Sub-D female and 6-pole terminal
• EMC: EN61000-6-2/EN55022 Class B + A1 + A2

Fiber optic converter, Stable switch power supply, guarantee the products long time working, convenience for changing power, Support IEEE802.1Q and ISL and backbone connection, Support crossover cord and direct cord, self-adapt function.

• Brand Name: Amere
• Number of Conductors: 2-6
• Voltage: 220V
• Warranty: 1 Year
• Body Material: Metal
• Certificate: CE Certified

Details : Extend network distances up to 160km Conduct 10/100/1000/2500/10000 Ethernet Rate Conversion SC, LC and ST fiber connector options SX, FX, LX, EX, ZX, BX fiber support Multimode and single mode fiber 10BaseT, Fast Ethernet Gigabit and 10G to fiber Advanced Features : Link Pass-Through, Far-End Fault, Auto-MDIX, Fiber Fault Alert, Loopback Manage via SNMP, CLI- Telnet/SSH, Internet Browser PoE Media Converters provide PoE PSE power injection over UTP Ethernet SFP Media Converters with pluggable fiber optic ports for use with MSA compliant SFPs. Managed Media Converters with extensive security and network integration features Industrial Temperature Media Converters for equipment in -40C to +75C operating temperatures SFP to SFP Protocol Transparent Fiber Mode Converters for ATM/SONET, SDH, Fibre Channel, Video and other connections

GOMC-1312-SFP 101001000M SFP slot media converter are effective solution, while uplink interface upgrade or network re-design. It can implement data transmission between twisted pair electrical signals and optical signals (SFP module).

• ER 05A: RS232 to RS 485/RS422 Converter
• ER21A: RS232/RS485 to Fibre-Optic Converter
• ER50: Fibre Optic Hub
• ER 50-5: Serial Converters
• ER 50-10: Serial Converters

Automation business include the following in-house communication and control products.    Application Used as convertors from one communication protocol to another Used as substation interface units, gateways etc

• Number Of Ports: 1 Serial Port and 1 FO Port
• Voltage: 9 to 48 V DC
• Brand: San Telequip
• Model Name/Number: SC09FSS
• Fiber Mode: Single Mode/Multi Mode

• Wavelength: 1310 nm
• Dimensions: 130(L) x 100 (B) x 30(H) mm
• Power Input •: 9 Volts 1A AC Adapter

This media converter converts 10100BASE-TX Ethernet twisted –pair signals to 100BASE- FX fast Ethernet fiber signals. Maximum fiber cable distance for multi-mode is 2kms.Complies to IEEE 802.3u standards Ease of Installation and Use

• Optical Wavelength: 1300,1600nm
• Rf Frequency: 5 to 860mhz
• Optical Input connector: SC/APC
• Rf out put: 0dBm @ 67dB Out
• Impendence: 75 ohms
• Flatness: +/ 1.5 Db
• Features: Economical Optical to Rf Signal Convertor,Low noise,High Linearty,Good Flateness,Good C/N Ratio

We are recognized as the industry leaders by developing high grade Fiber Optic Adapter. We are counted as the most preferred entity offering industry compliant optical fiber connectors. The offered range is developed precisely to meet and exceed the challenging specifications of varied housing specifications.

• Brand Name: SUN SHINE
• Usage/Application: Networking
• Model Name/Number: IJDE32
• Network Speed: 1 GBPS
• Number Of Ports/Pins: 2 PORT

These Isolators are incredible ! By converting signals into light beams internally, their advanced design lets your data ignal go through, but a voltage spike is blocked. Your PCTerminalDevice are effectively isolated from any surge, upto 1500 volts. These surges can be caused by various sources – lightening, static buildup or interruptions in AC power supply. Your systems must have these Isolators if your cable runs close to AC power lines.

• Material: Fibre
• Certification: CE Certified, FCC Certified
• Application: Optic Converting
• Weight: 0-200gm, 200-400gm, 400-800gm
• Color: Black, Grey, Shiny-silver, Silver, Z-black
• Condition: New, Used
• Power: 100W, 10W, 1Kv, 200W, 20W, 500W, 50W, 5W, 750W
• Supply Voltage: 0-3VDC, 3-6VDC, 6-9VDC, 9-12VDC
• Feature: Easy To Use, Fast Working, Light Weight, Low Power Consumption, Speedy, Stable Performance
• Warranty: 1yrs, 2yrs, 5yrs
• Speed: 0-10Mbps, 10-20Mbps, 20-40Mbps, 40-80Mbps
• Number Of Ports: 1, 2, 3, 4

• Brand Name: Tanna Electronics
• Model Number: TE 4050
• Frequency: 860 Mhz
• Material: Mild Steel
• Power: 230 VAC
• Optical Signal Level: -5dBM

• Brand Name: ADX
• Color: Black
• Material: MS
• Number Of Ports: 1
• Dimension (W x H x D): 120*120*30mm
• Net Weight: 2.5kg
• Phase: Single Phase
• Input Voltage: 220 V
• Frequency: 50 Hz

Moog Protokraft Saturn series fiber optic Ethernet Media Converters consist of optoelectronic transmitter and receiver functions integrated along with the 10100Base-TX to 100Base-FX or 1000Base-T Ethernet electrical to 1000Base-LX or 1000Base-SX Ethernet optical media conversion circuitry into an environmentally sealed unit.

• CODE: SC09FSS

SC09FS series of converters are an ideal choice for connecting devices situated in environments where electromagnetic & radio frequency is a major concern. They economically extend the Serial port over a distance up to 2Km over Multi-mode fiber or up to 20Km over Single-mode fiber. The converter supports RS232, RS422, RS485 (2 or 4 wire).

• Brand Name: mootek,Mootek
• Color: black
• Number Of Ports: 4 ports
• Warranty: 2 years
• Model Name/Number: IMF204-2F

• Material: CRCA Sheet
• Number Of Ports: 2
• Speed: 115 Mbps
• Humidity: 40-60 non considering
• Voltage: 10-30VDC
• Mode Type: Fiber Optic to RS 232 or 422 or 485

• Model Number: Fiber Converter
• Brand Name: NOVASTAR
• Color: Black
• Material: Die Cast
• Power: AC 100-240V 50/60Hz
• Size: 488.3 mm x 240.5 mm x 90.0 mm
• Temperature: -20 to 70
• Voltage: AC 100-240 V, 50/60 Hz
• Weight: 7.1 kg
• Certification: CE, FCC, IC

Fiber Optic Converter, Computer Networking, Cctv Dome Camera