Isolation Valves Dealers

• Brand Name: LSS
• Material: Brass
• Finishing: Polished
• Color: Silver
• Condition: New
• Automatic Grade: Manual
• Usage: Air Fitting
• Certification: ISO 9001:2008 Certified
• Operating Temperature: 300 deg Celsius
• Packaging Type: Carton
• Overall Length: 6-10 Inch
• Valve Size: 1/2inch
• Working Pressure: 6 kg
• Packaging Size: 20 Pieces
• Specialities: Non Breakable
• Type: Isolation Valves

• Packaging Type: Carton
• Specialities: Durable, Casting Approved
• Material: Metal
• Finishing: Polished
• Warranty: 1 Year
• Type: Isolation Valve (IS-3224 Header Line Valve)

It is strongly recommended that isolation valve assemblies be used on all container connections. This will greatly reduce the chances of chlorine leaks and increase the lifetime of the flexible connectors. Isolation valves are also used to prevent air and moisture from entering the flexible connectors and manifold piping. If moisture is allowed to enter the manifold (usually during changing of containers) this can lead to serious corrosion inside the manifold which then causes equipment failures and additional maintenance.

Gate Valves are primarily designed to start or stop flow, and when a straight-line flow of fluid and minimum flow restriction are needed. In service, these valves generally are either fully open or fully closed.The disk of a gate valve is completely removed when the valve is fully open; the disk is fully drawn up into the valve bonnet. This leaves an opening for flow through the valve at the same inside diameter as the pipe system in which the valve is installed.

• Packaging Type: Carton
• Valve Size: 22mm, 28mm
• Specialities: Durable
• Type: Medical Use
• Material: Brass
• Color: Golden
• Condition: New
• Country of Origin: India
• Packaging Size: 1 Pieces
• Usage: Hospital

Raw materials that we use for the production of the finished products are bottleneck assets and thus are highly essential. We strictly check the entire lot of raw materials before procurement. Looking for trusted Isolation Ball Valve suppliers? We are the perfect ones and capable of fulfilling bulk orders. Features: Premium-Quality Material Sturdy Construction Accurate Dimension  

• Packaging Type: Carton
• Diameter (mm): 60mm
• Overall Length: 20-30 Inch
• Voltage Range: 24 V AC
• Specialities: Non Breakable, Heat Resistance, Casting Approved
• Material: Brass
• Finishing: Polished

We are manufactures a wide range of slide gates to suit individual customer requirements and manufactured from both carbon and stainless steels. ISOLATION Gate Valve was designed to provide a quick acting isolation valve unit that can be installed into a bulk handling flow path to stop material flow. Isolation Valves can be equipped with manual or powered actuators, including hand wheel, chain wheel, pneumatic cylinder or electric motor.We manufacturer of customized isolation valve & Dampers to wild range of Industries : Each unit designed individually to suit each client’s applicationSize Range : Up to - 48’’ Or 1200 MM (Square & Round Port) and above on request.Wild rang of material available for different & typical applications : Carbon Steel, Alloy Cast Iron ,Stainless Steel , High Abrasion And Corrosion Resistant Material For Abrasive Application.

We are engaged in offering a wide range of Isolating Air Valve. Our product is highly demanded in the market for their high grade quality and durability. We offer product to our customers as per their needs and known for their effective usage.

• Material: Stainless Steel
• Pressure: High Pressure
• Usage/Application: Industrial
• Valve Size: 40 mm to 300 mm
• Structure Type: Needle
• End Connection Type: Threaded
• Finishing: Polished
• Material Grade: SS 304

• Country of Origin: India
• Material: Brass
• Number Of Way: 2way
• Finishing: Polished
• Driving Mode: Pneumatic
• Size: 12mm, 15mm, 22mm, 28mm

Medical grade Sizes: 12mm/ 15mm/ 22mm/ 28mm/ 35mm/ 42mm/ 76mm/ 108mm Lockable type CE certified WHO-GMP certified Conforms to ISO 13485 Conforms to HTM-Health Technical Memorandum-02-01

FEATURES: Low pressure 1" female NPT connection for high f low . Lockable w eather tight enclosure, for outside mounting. Gauge for display of supply pressure. Box can be mounted horizontally or vertically by changing f ront label. Box available in recessed or surface mounting. 
 SPECIFICATIONS: The “Emergency Gaseous Oxygen Inlet Station” shall be an CMM Alert-1 series. As required by NFPA 99 (National Fire Protection Association) “Health Care Facilities”, oxygen systems having the source of supply outside the building shall have an inlet to connect a temporary, auxiliary source of supply for emergency or maintenance situat ions. This connection shall include necessary valves and to allow for an emergency supply of oxygen and isolation of the normal source of supply. The inlet connection shall be a 1" female npt connection and be provided w ith a plug to prevent entry of foreign matter into the oxygen system w hen not in use. A 1" brass ball valve controls access to the emergency supply, and the gauge indicates the pressure being introduced into the oxygen pipeline. The Emergency Gaseous Oxygen Inlet shall be housed in a w eather tight resessed enclosure. The enclosure door shall be labelled "Emergency Low Pressure Gaseous Oxygen Inlet" and shall be equipped w ith a staple for padlocking to allow entry only by authorized personnel. Amount ing f rame shall extend completely around the enclosure to trim recessed mounting on an exterior w all. The interior of the enclosure shall be clearly labelled w ith instructions for connection and operation of the emergency oxygen inlet. Bronze body check valves with female pipe threads on each end is required for installation in the main and emergency supply pipeline in accordance w ith NFPA-99. A brass body relief valve w ith the relief pressure set @75 psi is required for installat ion in the emergency supply line. The relief valve shall be supplied factory cleaned for oxygen service and shall automatically reseat af ter discharging to provide a positive seal. Non-Locking ValvesSPECIFICATIONS All area and main line isolations valves shall be CMM Alert- 2 Series. Valves shall be non- lockable. The valves shall be oxygen cleaned, full port, three piece ball-type with flanges to allow easy service and installation. The valve shall have a bronze body, and a blow-out proof stem. The valve ball shall be bronze chrome plated, and the seats and packing shall be Teflon (TFE). The valve shall have a pressure rating of 600 psig. and be hydrostatically tested. Type .K. copper pipe extensions that are cleaned for medical gas service shall be fitted into each side of the valve. A gauge port shall be drilled into one of the pipe extensions for the purpose of inserting a gauge if required. The valve assembly shall be plugged or capped and sealed in a plastic bag to prevent contamination. Each valve shall have a bracket used to identify the gas being handled by means of a gas specific label. A lever type handle shall be used to operate the valve(s); the valve shall be changed from fully open to fully closed through a quarter turn of the handle.   

• Application: Gas
• Size: 1 inch
• Brand Name: Matrix
• Packaging Type: Box
• Warranty: 1 Year
• Type: Isolation ball valve
• Place Of Origin: Delhi
• Oprating Pressure: 5 Bar

  Isolation valves are designed for mounting between Danfoss pressure transmitters and fluid-filled systems and offer a fast and efficient method of connection and removal.

  Isolation valves are designed for mounting between Danfoss pressure transmitters and fluid-filled systems and offer a fast and efficient method of connection and removal.

Pressure Gauge with Isolation valve fitted on discharge side of the blower is to monitor the system pressure and Isolation valve can be closed during maintenance. The Isolation valve must be closed after noting down the pressure readings. It should be opened only when necessary. This will ensure long term run of the pressure gauge.

• Features: Robust construction, Compact design, High efficiency.