AB Reiniger Industries Pvt. Ltd Ramanathapuram, Coimbatore, Tamil Nadu

The purpose of YCP-Conditioning of yarn is to restore the natural properties of strength and elongation by thermo dynamic principle. The system should follow the basic physics of “Steam can be generated at low temperature if the pressure is low” – in other words, the pressure and temperature are directly proportional. REINIGER WELKER YCP follows the thermo dynamic principle for gentle treatment of yarn by producing cold saturated steam in a separate energy source and avoids contamination of yarn in the conditioning chamber. ADVANTAGES OF YCP: Increase in single yarn elongation and strength Significant reduction in fly liberation Free from electrostatic charges and better hairiness value Increased efficiency of knitting machines due to less unwinding tension and fewer needle breaks Good size pickup in sizing Better performance in good cloth formation and fabric softness Cotton, Cotton Mercerized, Wool, Silk, Polyester, Viscose-Rayon, Blends like PV/PC in Cop, Cone and hank from can be treated for conditioning and heat setting with homogeneity – TWO IN ONE MACHINE. Conditioning from 46°C to 120°C

The purpose of OHTC – Over Head Travelling Cleaner is to clean the machine parts of yarn producing/processing machine of either kind by blowing the filtered atmospheric air sucked through the nozzle to the intricate parts of machine for maintaining dust free environment thereby enhancing the quality of yarn and maximizing the production. FEATURES Specially Designed Hanging OHTC for LMW make LF 4200 series speed frame Common OHTC for Ring Spinning frame and Link Coner Adjustable Blowing attachments to accommodate Bobbin Transport system with flexibility to interchange for all types of spinning frame Auto-parking arrangements during doffing time Suessen Elite Nozzle / RoCoS Compact yarn attachments Wharve cleaning arrangements in case of Zinser make Ring frame Over Hanging OHTC for Warping / Jacquard Looms Obstacle sensor for auto reversal Suction arrangements at Suction pipe / Centralised Collection Suitable for Mixed Humidification system in Looms

The purpose of BTS – Bobbin Transport System is to transfer the bobbins from Speed frame to Ring frame without stain or sweating mark, protecting the surface of roving wound on bobbins, eliminating the intermediate storage area for bobbins, protecting the components of auto-doffing arrangements and other machine parts in a proper way of handling the material to achieve “HUMAN TOUCH FREE YARN”. Manual Speed frame and Ring Frame will be connected with overhead track-way by means of necessary pillars, brackets, bends, change over switches and bobbin trains. Bobbins will be loaded in to the trains and the movement of Bobbins/ Trains will be done manually by pulling the hand wheel of bobbin trains. Doffing at speed frame ----> Loading of Bobbins in Train ---------> Manually pulling the train to the Ring Frame ----> Loading of empty Bobbins ----------> Bring back the train to speed frame. Semi–Automatic: Speed frame & ring frame will be connected with overhead track- way by means of necessary pillars, brackets, bends, change over switches and bobbin trains. Bobbins will be loaded in to the trains and the movement of Bobbins / Trains will be done by geared motor up to the Buffer stock area. The movement of Bobbins will be done manually from Buffer Stock to Ring frame and empty Bobbins from Ring frame to Buffer stock. Doffing at speed frame ----> Loading of Bobbins in Train ---------> Movement of trains by geared Motors to Buffer stock area ----> Movement of Bobbins from Buffer stock to Ring Frame manually ----> Loading of empty bobbins and bringing back the train to Buffer stock manually ---------> Movement of empty bobbins from Buffer stock to Speed frame by geared motors. Fully Automatic: Speed frame and ring frame will be connected with over head Track-way by means of necessary Pillars, bracket, bends, change over switches and bobbin trains with fixed link block creel arrangements / closed circuit arrangements. Bobbins will be loaded in to the trains and the movement of Bobbins / Trains will be done by geared Motors in a closed circuit arrangement. Doffing at speed frame -----------> loading of Bobbins in Train -----------> Movement of trains by geared Motors to Ring frame ----------> Loading of empty Bobbins manually and bringing back the trains to speed frame by geared Motors. FEATURES Specially designed fully enclosed Aluminum track-way Smooth surface finish ensures proper movement of trains and bobbins Connectors, Brackets and Guide rollers are of Polymer material German made components for longer life Very easy to move bobbin trains in case of manual arrangement Pre-fabricated structures for easy installation Experience on installation of OHTC helps for compact design