AC Motors Dealers in Kalapatti, Coimbatore

Features IS: 12615 certified CM/L 4534158 Speed: 370/500/750 / 1000/ 1500/ 3000 rpm Volt: 42v/48v/110v/220v/380v/440v/670v Special Motors to use with inverters Fitted with SKF Bearings Duty cycle S1, S2, S3, S4 & S7 CE, Eff1, EFF2, EMC,EMV certified Applications Compressors, Blowers, Fans Vacuum pumps, Air curtains Printing Machinery Knitting Machines Drilling Machines Buffing & Polishing Machines Mosaic floor polishing machines Grinders General m/c tools Hydrawlic Power Packs

Features Winding design takes care of excess heat generated Suitable for Speed up to 9000 rpm Forced cooling on request Motors are with a S.F. 1.15 Rotors balanced with an accuracy of 1 gm

Sharp TEFC Squirrel Cage Induction Motors are designed, manufactured and tested to meet the latest British and international standards. Their proven high quality and rugged cast iron construction backed by a 12 month warranty make the Sharp Squirrel Cage Induction Motors ideally suitable for all industrial applications.   Rating and Standards   Electric Supply:   Three Phase motors are suitable for 415V ± 10%, 3 Phase, 50 Hz ± 5% supply. For combination of voltage and frequency maximum variation of 10% is allowed.   Single Phase motors are suitable for 220V ± 10%, 50Hz ± 5% supply. For combination of voltage and Frequency maximum variation of 10% is allowed.   Motor of variable voltage and dual voltages can be supplied on specific order / request.       Enclosure:   The standard protection is IP 54/IP 55.       Insulation:   All motors are of Class ‘F’ insulation with temperature rise restricted to Class ‘B’ limits, ensuring reliability and long life.       Duty Rating:   All motors are continuously maximum rated type S1 as per DIN EN 60034-1 at 50Hz, 40ºC and 1000 m. Motors of other duty conditions (S2, S3 etc) can be offered on request.       Ambient:   Standard Motors are designed to operate in an ambient temperature of -20ºC (-4ºF) to 45ºC (113ºF).       Altitude:   Standard motors are designed for operation at an altitude not exceeding 3300 feet (1000 meters) above, sea level. For higher altitudes derating of output kW may be necessary.       Mounting:   Motors are available in foot mounted and flange mounted designs confirming to IEC 72 (Dimensions only)/DIN 42673/ISI231 and IEC 72 (Dimensions only)/DIN 42677/IS 2223 standards respectively     Construction   Frames and Endshields:   Stator frames and end shields are made from high grade cast iron for exceptional strength and corrosion resistance. They are accurately machined to close tolerance in order to ensure rigid alignment and minimum vibration.       Cooling system:   Cooling fins are cast integrally with Stator frame and endshields. High airflow external fans with stator frames of deep fins construction ensure adequate cooling of the motor. Ensuring extended motor life.       Fan and Fan Cowl:   Polypropylene fans are fitted for effective cooling. Fan cowls are of heavy gauge pressed steel, construction, securely bolted to the motor endshield.       Stator Assembly with Winding:   The integral system of wire, slot and phase insulation and the overall varnish impregnation provide superior winding rigidity capable of withstanding vibration limits.       Bearing:   Standard motors are fitted with high quality double side sealed, C3 Clearance ball/bearings with pre-packed lubricants.       Rotor Assembly:   The rotor core consists of annealed and insulated laminations with a pressure die-cast high conductivity aluminium cage. Integrally cast with the cage are wafter blades and balance weight supports. The whole assembly is dynamically balanced to ensure quiet and vibration free operation.       Terminal Box:   Terminal boxes are rotatable 4 x 90 degree increments. Permitting the cable entry from any direction.   The terminal box is well sealed and located at the right hand side of the frame. Earthing terminal is provided in all motors.       Hardware:   All hardware is electro zinc plated for better corrosion resistance.       Finish:   All inside exposed surfaces are cleaned and sprayed with a corrosion inhibiting coating. All components are mechanically or chemically cleaned prior to the application of a phenolic rust proof primer giving excellent corrosion protection. The assembled motor is finished in a super enamel grey lacquer.       Testing:   Each motor undergoes a full program of tests during manufacture and prior to despatch as per IEC 34-1 /DIN EN 60034-1/IS 325 standard.       Range:   KW – 0.18 kW to 15 kW.Speed – 750/ 1000/ 1500/3000 rpmSpecial Motors – As per customer’s requirement.

• Power ratings available: 350W / 750W / 1KW / 1.5KW
• Voltage Input: 230V AC 50hz
• RPM: 1440 / 2880

Ph AC Squirrel Induction Motor Cap. Start for Electrical Lab - This Model is the Industrial/Educational model suitable for demonstrating to students the complete know of the Basics, Components, Starting methods, Wear & Tear & Maintenance of these motors packaged in small rating. Students can make connections of their own with the help of the terminations provided for study of features viz Starting methods, Speed-Torque, Effect of Phase angle, Study of Cogging/Crawling, Effect of reduced voltage, Blocked rotor test. lPh AC Squirrel Induction Motor Cap. Start

Frame less pancake type DC torque motors with integral commutator configuration supplemented with high energy rare earth permanent magnet stator and cantilever brush ring.

• Phase: Three Phase
• Power: 0.5/ 1 HP
• Frequency: 50/ 60 Hz
• Speed: 960/1440 RPM
• Motor Voltage: 415 V
• Frame: 90 L

AC 230VOLTS SINGLE PHASE MOTORS USED FOR GENERAL PURPOSE LIKE GRINDERS,INDUSTRIAL PURPOSE MOTORS ECT...

We are a renowned Manufacturer and Supplier of Induction Motors. The Induction Motors offered by us are manufactured by a technically trained and experienced team. The Induction Motors are used for various industrial applications and are known for their strength and durability. The Induction Motors are available in various designs as per different specifications. We supply Induction Motors in various parts of India at economical prices. Highlights Sturdy constructionEfficient performanceDimensionally accurateDurable Packaging Material : Cardboard packing

• Feature: String construction, Longer working life, Quality tested

• We are supplying Foot Mounted, Flange Mounted, Face Mounted and foot cum flange Mounted Motors • Die Cast Aluminum Body from 63 Frames to 112 Frames and C.I Body from 132 Frames to 160 Frames. • Windings are wound with polyester enameled ‘F’ class wire.

• Speed: 1001- 1500 RPM
• No Of Phase: Three Phase
• Rated Power: 0.5-1 HP
• Brand: TI
• Usage/Application: Industrial
• Motor Mounting Type: Foot Mounted
• Features: Enhanced productivity, Robust and strong, High effectiveness.

• Power: 22 KW
• Speed: 3000 rpm
• Phase: Three Phase
• Voltage: 440 V
• Efficiency: Exceeds IE-2
• Horsepower: 30 HP
• No. of Poles: 4
• Mounting Type: Foot cum Flange
• Torque: 60NM

• Voltage: 415 volts
• Frequency: 50Hz
• Motor type: Three phase AC squirrel cage induction motors
• Output range: 0.18KW to 315KW
• Number of poles: 2/4/6
• Standards: IS 12615 : 2011 ,IS 15999(Part 2/Sec 1) ,IS / IEC 60034-1
• Mounting: Foot (B3), Flange (B5), Face (B14), Foot cum Flange (B35), Foot cum Face (B34)
• Enclosure: Totally enclosed fan cooled
• Class of insulation: Class 'F' or 'H'
• Degree of protection: IP 55
• Method of cooling: IC 411
• Duty: S1
• Direction of rotation: Bi-directional
• Bearings: Double shield (ZZ)

• Application: Agriculture
• Feature: Abrasion resistant, Easy to operate, Power saving
• Power: 10-100 KW
• Voltage: 220V
• IP Rating: IP44
• No Of Phase: Single Phase
• No Of Poles: 2

TEFC Induction Motors, Electric TEFC Motors, Chicken Feather Plucker

Ac Geared Motors, ac drive, Servo Motors, Servo Drives, Harmonic Filters

asynchronous motor, Digital Programmable Thermostat, digital room thermostat

fractional horsepower motors, conventional wet grinder, Electric Motors

Dumpers, hydraulic excavators, soil compactors, Wheel Loaders

Three Phase Motors, Electric Motors

Inverter Duty Motors, Carding Brush Motor, dual speed motors, loom motors

FHP Motors, crompton motors, Greaves AC Drive, Godrej Single Phase Motor

cooking machine, Idli Dosa Batter Mixer Machine, Idli Making Machine

Induction Motor, motors pumps, R&D on motors, R&d on pumps

Auto Synchronous Motor, Cam Analyzer, Digital Ic Trainer

Three Phase Induction Electric Motor, Motor, Electric Motors

Induction Motor, Aircraft & helicopter 200V / 400Hz Motors

hollow shaft motors

Inverter Duty Motors, low voltage control panel, IE3 Motor, Crane Hoist Motor

Mono Compressor Pump, Water Pump, Blower Motor, Face Mounted Electric Motor