AC Motors Dealers in Saravanampatti, Coimbatore

• Voltage: 415 volts
• Frequency: 50Hz
• Motor type: Three phase AC squirrel cage induction motors
• Output range: 0.18KW to 315KW
• Number of poles: 2/4/6
• Standards: IS 12615 : 2011 ,IS 15999(Part 2/Sec 1) ,IS / IEC 60034-1
• Mounting: Foot (B3), Flange (B5), Face (B14), Foot cum Flange (B35), Foot cum Face (B34)
• Enclosure: Totally enclosed fan cooled
• Class of insulation: Class 'F' or 'H'
• Degree of protection: IP 55
• Method of cooling: IC 411
• Duty: S1
• Direction of rotation: Bi-directional
• Bearings: Double shield (ZZ)

• Speed: 1001- 1500 RPM
• No Of Phase: Three Phase
• Rated Power: 0.5-1 HP
• Brand: TI
• Usage/Application: Industrial
• Motor Mounting Type: Foot Mounted
• Features: Enhanced productivity, Robust and strong, High effectiveness.

AC 230VOLTS SINGLE PHASE MOTORS USED FOR GENERAL PURPOSE LIKE GRINDERS,INDUSTRIAL PURPOSE MOTORS ECT...

  We offer PMDC Motor that is designed in conformation with international quality standards. Our range is durable and extensively used in fans for their long lasting performances. These motors are appreciated for high efficiency and widely used in varied industry applications.Features: Consistent performance Lightweight Compact design High efficiency Durable Low noise level

• Motor Weight (kg): 1.4
• Operating Temperature: 70˚C

Frame less pancake type DC torque motors with integral commutator configuration supplemented with high energy rare earth permanent magnet stator and cantilever brush ring.

Features Winding design takes care of excess heat generated Suitable for Speed up to 9000 rpm Forced cooling on request Motors are with a S.F. 1.15 Rotors balanced with an accuracy of 1 gm   Motors for VFD drives We offer the entire range of motors to run with VFD Constant torque applications like crane, hoist, compressors, auto cones, winding m/c, printing m/c etc Variable torque applications like centrifugal pump , fan, blowers etc Entire textile applications Motors for constant torque application suitable for speed range of 1:10, 1:5, 1:2,etc can be provided. Depending upon the speed range Motors can be offered with forced cooling (IC 416). Forced cooling arrangement is available from 71 frames onwards. , Insulated Bearing on request Encoder mounting on NDE on request

Features IS: 12615 certified CML 4534158 Speed: 370500750 1000 1500 3000 rpm Volt: 42v48v110v220v380v440v670v Special Motors to use with inverters Fitted with SKF Bearings Duty cycle S1, S2, S3, S4 & S7 CE, Eff1, EFF2, EMC,EMV certified

• Phase: Three Phase
• Power: 0.5/ 1 HP
• Frequency: 50/ 60 Hz
• Speed: 960/1440 RPM
• Motor Voltage: 415 V
• Frame: 90 L

Sharp TEFC Squirrel Cage Induction Motors are designed, manufactured and tested to meet the latest British and international standards. Their proven high quality and rugged cast iron construction backed by a 12 month warranty make the Sharp Squirrel Cage Induction Motors ideally suitable for all industrial applications.   Rating and Standards   Electric Supply:   Three Phase motors are suitable for 415V ± 10%, 3 Phase, 50 Hz ± 5% supply. For combination of voltage and frequency maximum variation of 10% is allowed.   Single Phase motors are suitable for 220V ± 10%, 50Hz ± 5% supply. For combination of voltage and Frequency maximum variation of 10% is allowed.   Motor of variable voltage and dual voltages can be supplied on specific order / request.       Enclosure:   The standard protection is IP 54/IP 55.       Insulation:   All motors are of Class ‘F’ insulation with temperature rise restricted to Class ‘B’ limits, ensuring reliability and long life.       Duty Rating:   All motors are continuously maximum rated type S1 as per DIN EN 60034-1 at 50Hz, 40ºC and 1000 m. Motors of other duty conditions (S2, S3 etc) can be offered on request.       Ambient:   Standard Motors are designed to operate in an ambient temperature of -20ºC (-4ºF) to 45ºC (113ºF).       Altitude:   Standard motors are designed for operation at an altitude not exceeding 3300 feet (1000 meters) above, sea level. For higher altitudes derating of output kW may be necessary.       Mounting:   Motors are available in foot mounted and flange mounted designs confirming to IEC 72 (Dimensions only)/DIN 42673/ISI231 and IEC 72 (Dimensions only)/DIN 42677/IS 2223 standards respectively     Construction   Frames and Endshields:   Stator frames and end shields are made from high grade cast iron for exceptional strength and corrosion resistance. They are accurately machined to close tolerance in order to ensure rigid alignment and minimum vibration.       Cooling system:   Cooling fins are cast integrally with Stator frame and endshields. High airflow external fans with stator frames of deep fins construction ensure adequate cooling of the motor. Ensuring extended motor life.       Fan and Fan Cowl:   Polypropylene fans are fitted for effective cooling. Fan cowls are of heavy gauge pressed steel, construction, securely bolted to the motor endshield.       Stator Assembly with Winding:   The integral system of wire, slot and phase insulation and the overall varnish impregnation provide superior winding rigidity capable of withstanding vibration limits.       Bearing:   Standard motors are fitted with high quality double side sealed, C3 Clearance ball/bearings with pre-packed lubricants.       Rotor Assembly:   The rotor core consists of annealed and insulated laminations with a pressure die-cast high conductivity aluminium cage. Integrally cast with the cage are wafter blades and balance weight supports. The whole assembly is dynamically balanced to ensure quiet and vibration free operation.       Terminal Box:   Terminal boxes are rotatable 4 x 90 degree increments. Permitting the cable entry from any direction.   The terminal box is well sealed and located at the right hand side of the frame. Earthing terminal is provided in all motors.       Hardware:   All hardware is electro zinc plated for better corrosion resistance.       Finish:   All inside exposed surfaces are cleaned and sprayed with a corrosion inhibiting coating. All components are mechanically or chemically cleaned prior to the application of a phenolic rust proof primer giving excellent corrosion protection. The assembled motor is finished in a super enamel grey lacquer.       Testing:   Each motor undergoes a full program of tests during manufacture and prior to despatch as per IEC 34-1 /DIN EN 60034-1/IS 325 standard.       Range:   KW – 0.18 kW to 15 kW.Speed – 750/ 1000/ 1500/3000 rpmSpecial Motors – As per customer’s requirement.

three phase induction motors, cooking machine, Halwa Making Machine

Slip Ring Motor, friction sheet, Epoxy Insulator, Porcelain Insulator

Auto Synchronous Motor, Cam Analyzer, Digital Ic Trainer

Electric TEFC Motors, TEFC Induction Motors, Chicken Feather Plucker

Ac Geared Motors, ac drive, Servo Motors, Servo Drives, Harmonic Filters

Tefc Motors, Pumps

Ac Synchronous Motor, Air Cooled Servo Transformer, variac transformer

AC Spindle Motor, fanuc spindle motor, Fanuc Axis motor

AC Motors, Ac Drives, Servo Drive, varispeed f7 inverter

Inverter Duty Motors, Carding Brush Motor, dual speed motors, loom motors

Induction Motor

Three Phase Motors, Single Phase Motors, Electric Motors