Industrial Air Conditioning System Dealers in Eachanari, Coimbatore

• Material: Mild Steel, Stainless Steel
• Certification: CE Certified
• Application: Industrial Use
• Shell Side: 350 Psi – Pneumatic
• Tube Side: 150 Psi – Hydraulic
• Maintenance: Low Maintenance
• Finish: Fine Finish

An evaporative cooling system offers effective cooling by combining water evaporation, which is a natural process, with a reliable and simple air-moving system. Air from the outside is pulled via moist pads where evaporation cools it and is circulated in a building or a house with the help of a large blower. During this process, the temperature of the air in the outside gets reduced as much as thirty degrees.   Compared to the conventional systems, the fill type system attains maximum saturation. The design is compact and pre-fabricated, consumes less space, which is only about forty percent of that occupied by conventional systems. There is no requirement for masonry work and can be placed outside the building too. Consumption of power is negligible when compared to spray machines. This is due to low drop in pressure and low pump. The level of maintenance is also negligible since no nozzles are used. This promises trouble-free service. Since there are no nozzles of high pressure, the noise level is only about eighty decibel near the machines. Quick installation ensured as the machine is fabricated and tested at factory and possesses the flexibility for relocation. The equipments are available in FRP casings or stainless steel. The content material at the surface is specially engineered for the pupose of direct evaporative cooling & humidification. It is constructed from a unique cellulose paper that comes impregnated with compounds that are insoluble and prevent rotting. It also contains wetting agents and stiffening saturates. The material is made out of corrugated sheet that is assembled in pads that are self supporting. There is an arrangement of patented angle on the sheets in order to direct the flow of water towards the side of the air inlet, the place of occurrence of maximum evaporation. The pad is also constructed to flush away the dust from the atmosphere and has a contact surface of about 440 m2/ m3 between water and air. The cover of water distribution is of fiber glass reinforced plastic for its anti corrosive properties. The metal parts are of sixteen guage steel sheet that is galvanized. The water tank is of 3 mm frp that is of reinforced steel. Benefits of Evaporative Cooling System With the latest awareness on energy efficiency, evaporative cooling systems are gaining a lot of popularity Owing to the simple technology employed, the cost of the evaporative cooling system is cheaper The systems operate on 120V electricity which implies that they don't require special circuits of high-amperage unlike many air conditioners. It could be plugged into an outlet nearby The air gets moisture as a result of evaporative cooling. This helps in preventing the drying out of fabrics and wood furniture. The moist pads are good air filters and thus trap some pollen and dust. As the pads are kept wet, the trapped particles get flushed and caught in the cooler bottom. Not much of ductwork is needed in evaporative cooling systems. For a system that is newly installed, a short duct helps to direct the air that is cooled to the building's central point.

• Brand Name: gireesh

We are offering evaporative cooling system, gireesh are engaged in offering technologically advanced evaporative cooling system, which is manufactured from premium grade of raw material. Available in different models and sizes, our evaporative cooling units are used in diverse industries. drycool evaporative air cooling systems are specially designed for efficient cooling with low energy consumption. These evaporative cooling systems are based on highly efficient cellulose rigid media to provide high saturation efficiencies and can substitute the need of the mechanical refrigeration in several applications. They are best used in places that require a lot of fresh air movement. We, at dry cool provide a quality engineered product. features • comfort bearing: the units are engineered to cater the high demand on comfort cooling. The systems provide more cfm on the same hp. On the exterior an aluminium filter of rigid inlet wire is installed to clean the incoming air. • compact unit: the unit has a compact prefabricated design that occupies only 40% of space and volume as compared to other machines.

The Air Cooled Chiller, which we offer, is manufactured as per the set industrial standards and norms. We offer premium Air Cooled Chiller at competitive rates to the clients. We are among the reliable sources to get the best Air Cooled Chiller. Highlights Use special compressors from Copeland, Danfoss and Bitzer, having a capacity from 5TR up to 20TR with Single Compressor System Also, Multiple Compressor Systems are availableVaried range of Refrigerants available such as Freon R 22, R 404a, R 407c, R 507, R 134a, etc.Low NoiseLow VibrationLow Failure rateCompact modular design Maximum accessibility Total connectivityReliable and High Efficiency and High Performance Scroll Compressor Tropicalised design for high ambient temperatures up to 52 degree CBrazed Plate EvaporatorWide Choice of Capacities and EfficienciesEasy installationBetter part load efficiency with multiple compressorsPositive pressure designLower electrical infrastructure cost Available with heat pump application

We are the most promising name, involved in supplying textile humidification system. Ours is a well-established firm located in Coimbatore(India) and engaged in the business of providing a wide assortment of quality products.

Exhaust fans deliver the industry’s best performance and durability for grease contaminated air and general clean air applications as found in food service and fume hood exhaust. We offer the most comprehensive line of restaurant rated exhaust fans from up blast and utility sets to efficient inline options. Fully integrated ventilation systems that results in positive, balanced buildings where customers and employees prefer to dine and work. FEATURES A complete high quality modular system for your kitchen High Profile Centrifugal Blowers make sure elevated smoke extractions Ducts are neatly fabricated Available in various size according to customer need Instant result oriented equipment Highly durable

• Feature: Low power consumption, Easy to install, Quality approved

• Height: 2 - 2Feet
• Shape: Rectangular
• Frame Material: UPVC
• Brand: Quality Windows
• Frame Color: White, Grey etc

A charge-air cooler is simply an all-encompassing term, meaning that it cools the turbo's air charge before it is routed into the engine. Usually a charge-air cooler means an air-to-air cooler where the heat is rejected using ambient air flowing through the heat exchanger, much like the engine's coolant radiator. In general, an intercooler or aftercooler is said to be a Charge-Air Cooler.

Our line of modular air cooled glycol chillers are similar to our packaged air cooled chillers except that their unique design allows for a more customized approach to your applications. Some cooling processes already have a pumping mechanism in place or a storage tank in-line. In those instances our modular air cooled glycol chillers can be a money and energy saving alternative in that they can be ordered with or without these components installed. Technical Information Maintenance and Operating Manual Chiller Controller Error/Alarm Troubleshooting Manual   Features ETL listed Microprocessor Controller Industrial duty system process pump Stainless Steel, fused, system process pump (Optional) Stainless Steel, brazed plate evaporator with ½” insulation, and secured in a steel bracket Scroll compressor with crankcase heater Suction accumulator Water flow switch Hot gas by-pass capacity control 24V control transformer Direct drive condenser fan motor Rust resistant, high CFM, aluminum condenser fan blade Condenser(s): copper tube / aluminum fin Compressor motor contactor Condenser motor and control circuit fusing “Hard start kit” (single phase units only) Painted, galvanized sheet metal cabinet ½” insulation on all water and refrigerant lines Liquid line drier, sight glass, solenoid, TEV Full refrigerant charge from factory Stainless Steel storage tank with ½” insulation (Optional) Fused Stainless Steel re-circulation pump for tank operation with ball valve and cleanable strainer (Optional) Tank pressure relief valve, vent and drain connections (Optional) Applications   Dynamometers Presses Mining Injection Molding Extrusion Blow Molding Laser Cutting Welding Optics High Altitude MRI Cooling Linear Accelerator Cooling Medical Chillers Military Chemical & Pharmaceutical Breweries, Wineries, Food Processing Jacketed Vessels Laboratories Machine Tools Printers Hydraulic Cooling Data Center Cooling

The manufacturing of air cooled condenser is made of modules arranged in parallel rows as like air cooled heat exchanger. The air cooled condenser condensate exhaust steam from the turbine and it return the condensate to the boiler. That is in power plants steam is used to rotate the turbine. After the application, the steam will be a waste one. So as an economical part of operation, the steam is re condensate to water and then re-used for boiler feed water. If your air cooled condensers (acc) are not operating at their optimum they are losing money. by using tube tech international’s innovative air cooled condenser cleaning service lower production rates, higher mechanical costs, higher maintenance costs plus lost time in both machinery and manpower will be problems of the past. Air cooled condenser tube cleaning with specialist industrial cleaning will make a huge difference to your operation. You will increase performance, improve safety, reduce your carbon emissions and reduce overall downtime the major benefits of air cooled condenser are: elimination of additional water usage from the condensing power cycle flexibility in power plant site selection decreased time required for plant permitting the fin tube is the core technology of the air cooled condenser. single-row condensers (src) - an elongated, flat tube with brazed aluminum fins. multi-row galvanized (mrc) - an oval tube with hot-dip galvanized steel fins.

With the aid of skillful professionals, we present a comprehensive range of Fruits Condenser. This product is available in diverse configurations. This product is extremely utilized by our customers for their top performance and longer service life. Our provided range of products is examined on definite quality parameters before its dispatch. We offer various models of products to suit dissimilar necessities of the customers. Features: Compact construction Longer working life High strength

• Weight: 1000-2000kg
• Driven Type: Electric
• Cooling Capacity: 11kw
• Voltage (volt): 220 - 380
• Usage: Industrial Use

We are leading manufacturer of Chiller in india, and also we offer a full range of chiller services, installation. JC Equipments having 23 years of experience and in all industrial cooling applications and High quality design by our designing teams.The chiller with the aim of removes the heat from a liquid via a absorption refrigeration cycle and chiller is mostly used in heat processing industries.   Vital parts of Air Conditioning Units are, Compressor, Condenser and Evaporator. Air Conditioner Chiller Works It's impossible to understand with air conditioner chiller works. The air conditioner's chiller Components are condenser and evaporator. They are moreover as well-known as the heat exchanger units and also the chilling system is able to integrated with supplementary heating systems such as boilers and solar panels and others.   Chiller Applications The chiller is used in following industries, Plastic industry, Power Generation Plants Welding Plants Chemical Processing Industries Food Processing Units Ssemiconductors, Cement Industries Power Generation Plants Compressed air and gas cooling.

Air cooled Heat Exchangers (or) Fin fan Cooler or Air Fin Cooler are the same Air Cooling equipment. In some part of the world Air Cooled Heat Exchangers are also known as Air Fin Cooler. Simply says Air Fin cooler, Fin Fan cooler, Coil Cooler, Dry Cooling Tower are the other names of Air Cooled Heat Exchangers. It also used for Heat rejecting from a hot process fluid to the surrounding atmosphere by using the atmospheric air as a cooling media.

We are leading manufacturers and suppliers, exporters of air cooled condenser in india and the condenser types are Natural Convection,Forced Convection and also manufacture the Water cooled condenser. Coal based and All Thermal power plants, Solar Power Plants, Nuclear power plants, Gas Based Power Plants.

• Sizes ranging: 15 feet or 4.5 m

We offer these condensers in various sizes and load capacities. They are custom made as per the user specifications and needs. The heat exchanger condensers offered by us are durable, weigh less, corrosion resistant and reliable.

• System: Power Duct
• Fan Motor: 5 HP, 415v, 3Ø 50Hz, 4 Pole
• Drive motor: 150 Watts, 3Ø 415 Volts
• Blowing Air Volume: 3500 m3/h
• Suction Capacity (Total Pressure): 2900Pa
• No. of Blowing pipes x size*: 10 x 755 mm Dia
• No. of Suction pipes x size*: 4 x 100 mm Dia
• Travelling speed: 12/16 m/min
• Filter Area: 0.14 m2
• Function Control: PLC
• Travelling Path: Straight line & Curved

Air cooled condenser is a heat-exchange system. Conversely, the vapour can be fed through the tubes with the coolant water or air flowing around the outside. Air cooled condenser, the coolant flows through the tube side and distilled vapor through the shell side with distillate collecting at or flowing out the bottom.Air cooled condenser are also used in industrial-scale distillation processes to cool distilled vapor into liquid distillate.