Industrial Air Conditioning System Dealers in Sidco Industrial Estate, Coimbatore

Air cooled Heat Exchangers (or) Fin fan Cooler or Air Fin Cooler are the same Air Cooling equipment. In some part of the world Air Cooled Heat Exchangers are also known as Air Fin Cooler. Simply says Air Fin cooler, Fin Fan cooler, Coil Cooler, Dry Cooling Tower are the other names of Air Cooled Heat Exchangers. It also used for Heat rejecting from a hot process fluid to the surrounding atmosphere by using the atmospheric air as a cooling media.

Finned Tube can also be suitable for liquid cooling applications. Copper is specified in supply and return manifolds and in tube coils. Finned Tube heat exchangers are most commonly used for forced air heating and cooling systems, such as with indoor and outdoor wood furnaces, boilers, and stoves.

We are United Heat Exchanger providing solution for Air condensation system for all types of Thermal Power plants.In systems involving heat transfer, a condenser ( Air Cooled Condenser )is a device or unit used to condense a substance from its gaseous to its liquid state, typically by cooling it. In so doing, the latent heat is given up by the substance, and will transfer to the condenser coolant. Condensers are typically heat exchangers which have various designs and come in many sizes ranging from rather small (hand-held) to very large industrial-scale units used in plant processes. For example, a refrigerator uses a condenser to get rid of heat extracted from the interior of the unit to the outside air. Condensers are used in air conditioning, industrial chemical processes such as distillation, steam power plants and other heat-exchange systems. Use of cooling water or surrounding air as the coolant is common in many condensers.   Specifications : A condenser unit used in central air conditioning systems typically has a heat exchanger section to cool down and condense incoming refrigerant vapor into liquid, a compressor to raise the pressure of the refrigerant and move it along, A fan for blowing outside air through the heat exchanger section to cool the refrigerant inside. Applications : A typical configuration of such a condenser unit is as follows: The heat exchanger section wraps around the sides of the unit with the compressor inside. In this heat exchanger section, the refrigerant goes through multiple tube passes, which are surrounded by heat transfer fins through which cooling air can move from outside to inside the unit. Advantages : There is a motorized fan inside the condenser unit near the top, which is covered by some grating to keep any objects from accidentally falling inside on the fan. The fan is used to blow the outside cooling air in through the heat exchange section at the sides and out the top through the grating. These condenser units are located on the outside of the building they are trying to cool, with tubing between the unit and building, one for vapor refrigerant entering and another for liquid refrigerant leaving the unit. Of course, an electric power supply is needed for the compressor and fan inside the unit.

The Air Cooled Chiller, which we offer, is manufactured as per the set industrial standards and norms. We offer premium Air Cooled Chiller at competitive rates to the clients. We are among the reliable sources to get the best Air Cooled Chiller. Highlights Use special compressors from Copeland, Danfoss and Bitzer, having a capacity from 5TR up to 20TR with Single Compressor System Also, Multiple Compressor Systems are availableVaried range of Refrigerants available such as Freon R 22, R 404a, R 407c, R 507, R 134a, etc.Low NoiseLow VibrationLow Failure rateCompact modular design Maximum accessibility Total connectivityReliable and High Efficiency and High Performance Scroll Compressor Tropicalised design for high ambient temperatures up to 52 degree CBrazed Plate EvaporatorWide Choice of Capacities and EfficienciesEasy installationBetter part load efficiency with multiple compressorsPositive pressure designLower electrical infrastructure cost Available with heat pump application

• Material: Mild Steel, Stainless Steel
• Certification: CE Certified
• Application: Industrial Use
• Shell Side: 350 Psi – Pneumatic
• Tube Side: 150 Psi – Hydraulic
• Maintenance: Low Maintenance
• Finish: Fine Finish

We are the most promising name, involved in supplying textile humidification system. Ours is a well-established firm located in Coimbatore(India) and engaged in the business of providing a wide assortment of quality products.

Exhaust fans deliver the industry’s best performance and durability for grease contaminated air and general clean air applications as found in food service and fume hood exhaust. We offer the most comprehensive line of restaurant rated exhaust fans from up blast and utility sets to efficient inline options. Fully integrated ventilation systems that results in positive, balanced buildings where customers and employees prefer to dine and work. FEATURES A complete high quality modular system for your kitchen High Profile Centrifugal Blowers make sure elevated smoke extractions Ducts are neatly fabricated Available in various size according to customer need Instant result oriented equipment Highly durable

We manufacture comprehensive ranges of Humidification Plant that installed with technically advanced features. Our Plants are high on demand in Textile Industry as it assists in manufacturing yarns of various garments. The Air Humidification Plant, manufactured by us, is easy to install and has long functional life. However, we offer customized designs of Humidification Plant in distinct grades and specifications. Consequently, we are considered as one of the most prominent Industrial Humidification Plant Manufacturers in Tamil Nadu.   With our state-of-the-art technology, Target equipment manufacture a wide range of Humidification Plant. Our range of Humidification Plants caters to the needs of textile industries and helps to manufacture yarns of various garments. We offer these plants in customized specifications as per the demands of our valued clients. Our humidification of indoor air for thermal comfort. In a broader sense, the term can refer to any form of cooling and heating, ventilation, or disinfection that modifies the condition of air. An air conditioner (often referred to as AC or air con.) is an appliance system, or machine designed to stabilise the air temperature and humidity within an area to use for cooling as well as heating depending on the air properties at a given time, typically using a refrigeration cycle but sometimes using evaporation, Features Longer functional life, Easy to install, Application specific design, Precision functionality Applications Spinning mills Textile industries Movie theatre Data centers Textile factories Physical testing facilities Plants and farm growing areas Nuclear facilities Chemical and biological laboratories Mines Industrial environments Food cooking and processing areas

• Height: 2 - 2Feet
• Shape: Rectangular
• Frame Material: UPVC
• Brand: Quality Windows
• Frame Color: White, Grey etc

Components of Air Cooled Condenser System   Ejectors 3Bellows Instrumentation Pipe Lines Strainers Valves Civil construction Cleaning system Fans ,Motor & Gear box Parts of Air Cooled Condenser System   Expansion bellows Hogger Ejection system Condensate extraction pumps Drain pot Pumps Inter condenser After condenser Condensate storage tank Gland steam condenser Drain Pot Difference Between Air Cooled Condenser and Water Cooled Condenser Air Cooler   An air condenser is generally a lesser amount of valuable for condensing gases, for the reason that of the slower cooling time. However, if the gases are extremely hot, the icy water be able to cause the condenser to crack.   Air cooled condenser remove heat by blowing air over the condenser coil. The Air cooled condensers, as well referred to the same as "fin and tube" condensers, are in all probability the most able to be seen component in an air conditioning system, be it a room or packaged air conditioner or a packaged chiller.   If the condenser has water curving interested in the top part first, it will just run in a straight line through and not cool the vapour. by means of filling it from the base, the water is forced into the condenser and fills it totally. Water cooled condenser remove heat by pouring water over the condenser coil.   Spares of Air Cooled Condenser   The below spare lines also have required valves for operation. By this way the continuous operation of Condensation system is ensured by JC Equipments Pvt Ltd.   Inter and after condenser Ejectors Condensate extraction pump Drain pumps   Air Cooled Condenser Working Principle   Air Cooled Condensers Types   Natural Convection Forced Convection.   Natural Convection occurs when a heater with a reduction of dense fluid is pressed left by a cooler denser fluid.   Forced Convection occurs when an outer force pushes a fluid, such the same as water of air, to create it move about and transfer heat.   Air Cooled Condenser Design   The nearly all accepted style of Air Cooled Condenser is the modularized ('A' frame structured design), used on industries and power plants of all sizes. Our design teams are updated new technology of the Air Cooled Condenser design for all types of industries. The Air Cooled Condenser design group will discuss about Technical aspects of Air Cooled Condenser for Power Plants and also more industries. The 'A' frame structured designs are mostly used in the power plants. Coil Design : Advanced Smart Circuitry Coil Technology Our Air Cooled Condenser Design Process Contains for Thermal Design. Air Cooled Steam Condenser Problem   A successful air cooled steam condenser be required to continuously and totally gather and ejection all of the non condensables in the system. The non condensable are left behind inside the tubes and headers when the steam condensers   Applications of Air Cooled Condenser   All Thermal power plants Gas based Plants Coal based plants Oil Plants Biomass power plants Refrigerant hot gas piping Nuclear power plants

• Brand Name: gireesh

We are offering evaporative cooling system, gireesh are engaged in offering technologically advanced evaporative cooling system, which is manufactured from premium grade of raw material. Available in different models and sizes, our evaporative cooling units are used in diverse industries. drycool evaporative air cooling systems are specially designed for efficient cooling with low energy consumption. These evaporative cooling systems are based on highly efficient cellulose rigid media to provide high saturation efficiencies and can substitute the need of the mechanical refrigeration in several applications. They are best used in places that require a lot of fresh air movement. We, at dry cool provide a quality engineered product. features • comfort bearing: the units are engineered to cater the high demand on comfort cooling. The systems provide more cfm on the same hp. On the exterior an aluminium filter of rigid inlet wire is installed to clean the incoming air. • compact unit: the unit has a compact prefabricated design that occupies only 40% of space and volume as compared to other machines.

Water-cooled Screw Chillers are designed to work within extreme tropical zed weather conditions, while maintaining the highest energy efficiency. Designing and the choice of equipment are critical to conform to superior standards. Manufacturing and testing standards at our facilities are at par with the best, internationally. Installed equipments are operation friendly and are backed by competent engineering team to realize the advantage while being in operation. The Industrial Screw Chillers are designed and manufactured for the cooling processes, where each process is completely different from the other. The industrial chillers are designed using qualitative materials and metallurgy and are fitted with the most efficient compressors from Europe. The materials and metallurgies are chosen according to the process fluid being used as per the specific process requirements. Complete study of the process to ascertain peculiarity of the requirement, precedes the choice of equipment and accessories being proposed, through an engineering team with specific expertise.   Salient Features   Optimum selection of components for your application With evaporator options as immersed coil, plate type, shell, and coil Use of stainless steel tanks for corrosion free operation Digital controller for temperature control and fault indication High-efficiency heat transfer Low power consumption High-quality water pumps Refrigeration system and electrical safety devices

An air condenser is generally a lesser amount of valuable for condensing gases, for the reason that of the slower cooling time. However, if the gases are extremely hot, the icy water be able to cause the condenser to crack. Air cooled condenser remove heat by blowing air over the condenser coil. The Air cooled condensers, as well referred to the same as "fin and tube" condensers, are in all probability the most able to be seen component in an air conditioning system, be it a room or packaged air conditioner or a packaged chiller. If the condenser has water curving interested in the top part first, it will just run in a straight line through and not cool the vapour. by means of filling it from the base, the water is forced into the condenser and fills it totally. Water cooled condenser remove heat by pouring water over the condenser coil.Air Cooled Condenser for all types of Thermal Power plants and indusries, Oil Plants and Gas Plants. JC has the good quality manufacturers and installing capability to supply the most excellent air cooled condenser for every applications.

• Specialities: Accurate dimension, Flawless finish, Optimum strength

• System: Power Duct
• Fan Motor: 5 HP, 415v, 3Ø 50Hz, 4 Pole
• Drive motor: 150 Watts, 3Ø 415 Volts
• Blowing Air Volume: 3500 m3/h
• Suction Capacity (Total Pressure): 2900Pa
• No. of Blowing pipes x size*: 10 x 755 mm Dia
• No. of Suction pipes x size*: 4 x 100 mm Dia
• Travelling speed: 12/16 m/min
• Filter Area: 0.14 m2
• Function Control: PLC
• Travelling Path: Straight line & Curved

We are leading manufacturers and suppliers, exporters of air cooled condenser in india and the condenser types are Natural Convection,Forced Convection and also manufacture the Water cooled condenser. Coal based and All Thermal power plants, Solar Power Plants, Nuclear power plants, Gas Based Power Plants.

• Type: Oil Chiller
• Certification: ISO 9001:2008 Certified
• Country of Origin: India

Air Cooled Condensers, Air Cooled Heat Exchanger, Tube Bundle

Foundry Sand Cooler, Aluminium Air Oil Cooler, Bottle Shape Cooling Tower

We carry out installations, preventive, maintenance, servicing, anti becterial treatment and repair of both domestic and commercial air conditioning units and refrigeration equipments.

The manufacturing of air cooled condenser is made of modules arranged in parallel rows as like air cooled heat exchanger. The air cooled condenser condensate exhaust steam from the turbine and it return the condensate to the boiler. That is in power plants steam is used to rotate the turbine. After the application, the steam will be a waste one. So as an economical part of operation, the steam is re condensate to water and then re-used for boiler feed water. If your air cooled condensers (acc) are not operating at their optimum they are losing money. by using tube tech international’s innovative air cooled condenser cleaning service lower production rates, higher mechanical costs, higher maintenance costs plus lost time in both machinery and manpower will be problems of the past. Air cooled condenser tube cleaning with specialist industrial cleaning will make a huge difference to your operation. You will increase performance, improve safety, reduce your carbon emissions and reduce overall downtime the major benefits of air cooled condenser are: elimination of additional water usage from the condensing power cycle flexibility in power plant site selection decreased time required for plant permitting the fin tube is the core technology of the air cooled condenser. single-row condensers (src) - an elongated, flat tube with brazed aluminum fins. multi-row galvanized (mrc) - an oval tube with hot-dip galvanized steel fins.

• Type: Air Blowers
• Certification: ISO 9001:2008 Certified
• Weight: 0-10kg, 10-30kg, 30-50kg, 50-70kg, 70-100kg
• Color: Black, Blue, Brown, Green, Sky Blue, White, Yellow
• Voltage: 110V, 220V, 240V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 12-15kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year
• Presssure: High Pressure, Low Pressure, Medium Pressure, Unpressurized

Air Cooled Heat Exchanger, WELDED BONNET HEADER AIR COOLED

Fruits Condenser, Walking Beam Furnace, roller kiln, Car Bottom Furnace

stainless steel water boiler, dosa plate burner, rice cooking vessel

Cooling Tower Motors, Cooling Tower Gear Box

car air conditioner fitting, Air conditioner, WASHING MACHINE