Air Dryers Dealers in Kng Pudur, Coimbatore

Air dryers the valve is actuated pneumatically by either the compressor unloader solenoid valve or other pneumatic source on a cycle or regular basis, i.e. Air dryer actuating source or a locomotive microprocessor with independent solenoid valve. The valve is also designed with an integral drainshut-off feature to manually exhaust contaminants as desired. Automatic drain valve is supplied with a flange-type mounting bracket for ease of installation on standard locomotive air reservoirs or flange sump caps commonly used with the centrifugal air filter with coalescer.

• Weight: 55 kg
• Flow in cfm: 20
• Power Consumption: 0.36
• End Connection: 1" BSP
• Dimensions: 530*450*475 mm

Features 1.Condensing Temperature control for ambient Temperature variations. 2.Hot gas by-pass circuit for partial load. 3.Maintains constant pressure dewpoint. 4.Compressor safety through HP cut switch. 5.The advanced mimic display indicates the functions & faults if any. 6.Trident Automatic Drain Valve provided in Demister & Heat exchangers for effective Dryer functioning.

Trident Pneumatics a prominent Heatless air dryer manufacturer support heatless air and gas dryers for industrial compressed air systems and other different applications.

• Voltage: 220V
• Condition: New
• Finishing: Polished
• Packaging Type: Carton Box
• Power Source: Electric
• Warranty: 1 Year
• Brand Name: Frank Compressors

Refrigeration Compressed Air Dryer (Nippydry) Principle of Operation Warm compressed air enters the Air / Air Heat Exchanger where it is precooled by outgoing cold dry air. The pre-cooled air enters the Air to Freon Heat Exchanger where it is cooled down to +3°C.   At this temperature, water condenses into liquid droplets, which are removed from the air stream by a very efficient Demister and automatically discharged by a Automatic Drain Valve.   The cold dry compressed air passes back through the secondary side of the Air to Air Heat Exchanger where it is reheated by the incoming warm air.   Features Dewpoint +3°C Designed for high ambient temperatures Advanced 3 in 1 heat exchanger for low pressure drop. Time delay for compressor safety Intelligent controller

Air contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, instruments, etc which results in the downtime of whole system. Summits Heatless Air Dryers remove the moisture to a level of 80 ppm(w) by using pressure swing adsorption technology. The wet air enters into one desiccant tower and gets dried by the high performance desiccant adsorbent. The dry air passes through check valves and post filter to the utility. A portion of dry air (depending on the operating pressure and required dew point temperature) passes through an orifice into the other saturated tower at near atmospheric pressure.

  Refrigerated dryers are general purpose dryers, most economical being less running cost. SAI refrigerant system is environmentally friendly in nature. Refrigeration dryer remove moisture from compressed air to the desired dew point temperature. The dryer includes two separate circuits like compressed air circuit & refrigeration circuit.    SALIENT FEATURESCompact DesignRunning cost is Very LowHot Gas by-pass circuit for partial Load.Maintains Constant Pressure Dew PointAuto Drain Valve Provided for cyclone separatorNon-cyclic SystemLow Pressure DropEnvironment Friendly systemCompressor safety through maintain Low/High Constant PressureNote : High Pressure / flow range can be offered on request. Operating Pressure standard at 14kg/cm      

Dryspell medical Dryers delivers a dewpoint of +2°C as mandated by NFPA 99. The dryspell medical dryers operates with the principle of Pressure Swing Adsorption, hence removes more moisture than a refrigeration air dryers, and it delivers moisture free dry air consistently irrespective of flow variation.Based on medical application criticality, the package comes with one working and one stand by dryers. So there is no need to stop the air dryers for maintenance. Purge saving system saves purge air upto 60% for a typical hospital load of 30% to 40%. Dewpoint and CO monitor enables ti monitor dewpoint and CO levels as mandated by NFPA 99    

desiccant air dryers, Air Dryer, compressed air treatment systems

membrane dryer, medical air dryers

medical air dryers

Auto Drain Valve

Air Compressor, rotary screw air compressors

Compressed Air Dryers, Compressed Air Filters

Air Compressor, Air Compressor Spare Parts, Automatic Drain Valves

Medical air dryer, Diesel Engine Driven Compressor