Air Dryers Dealers in Coimbatore

• Desiccant Material: Silica Gel
• Dryer Technology: Dessicant
• Bowl Size: 6.7 lb
• Maximum Pressure: 250 psi
• Application: Dry Air
• Drying Capacity: 21 - 50 cfm
• Application: Dry Air
• Air Inlet Temperature: 120 F

• Country of Origin: India
• Type: Refrigerated
• Voltage: 415 V
• Frequency: 50 Hz
• Drying Capacity: 40 cfm
• Dryer Horse Power: 2 HP
• Minimum Output Dew Point: -40 C
• Maximum Pressure: 18 Bar
• Air Inlet Temperature: 90 Degree Celsius
• Power Watt: 800 W
• Dimensions: 16x16x12 Inch

• Type: REFREGIRATED TYPE COMPRESSED AIR DRYER
• Brand Name: JESUS RAPTURES HIP BRAND
• Certification: -
• Type: -
• Voltage: 230V,SINGLE PHASE - 415V,THREE PHASE
• Condition: PACKED
• After-Sales Service Provided: IMMEDIATE
• Cooling Type: REFRIGERENT
• Model Number: PETER SERIES
• Place of Origin: COIMBATORE

• Type: Air Dryers
• Warranty: 3 yrs

We are the main supplier of this product.

Refrigeration air dryer . Used to control moisture that comes out of air compressor.it is available from 20 cfm - 2000 cfm. It is used in all type of pneumatic machineries used companies , eg: knitting , powder coating , color sorting , spinning mills , pet bottle machineries , service stations , etc

We always remain concerned about delivering a flawless range of products and thus we store the entire lot under secured environment till the final dispatch of the orders. Buyers can order our products in bulk, as we maintain year around availability. In addition, we have reliable transportation system to make timely delivery.

• Temperature: 2 to 60oC
• Operating pressure: 7 bar (g)

The Humid compressed air consisits of N2, O2-Water vapours and traces of other gases passed through a bundle of hollow fibres. The hollow fibres are composed of a membrane specifically designed to attract and adsorb the water vapour. Inorder to desorb the water vapour the partial flow of dried air expanded to atmospheric pressure and passed through outside of the hollw fibre bundle in a counter flow direction, which will flush out the moisture.

Function: Used for evaporation, dryer, demisting Material of Construction: AluminumStructure: Bar and Plate Heat Exchanger Specialty: High Heat Transfer ability , Energy-Saving Heat Exchanger Application: Air Dryers General Process: 3-in-1 and 4 in 1 heat exchanger and water-oil separator model is designed specially for the Refrigerated Air Dryer. It consists of Precooler (Air to Air Plate Fin Heat Exchanger), Evaporator (Air to Refrigerant Plate-Fin Heat Exchanger) and stainless steel mesh Gas-Liquid separator filter. It has four functions: Precooling, Cooling, Separation and Filtration. There is insulating layer outside of this unit in order to reduce the loss of heat and increase the effectiveness. Precooler and Evaporator are both aluminum vacuum brazed Plate-Fin Heat Exchangers. Compared with shell and tube heat exchanger in traditional refrigerated air dryer, the heat transfer area of plate-fin heat exchanger is larger and so the exchanger effectiveness is higher. Generally, the heat transfer area density of plate-fin heat exchanger can be 1500m2/m3, but the shell and tube heat exchanger’s is only about 160m2/m3. And the heat transfer coefficient of plate-fin heat exchanger is 5-10 times higher than shell and tube heat exchanger. Air-water separator uses optimized spiral guide structure and the main principle is to separate the liquid and gas according to the difference of the liquid weight and gas weight and using gas flow direction and the inertia of speed changing. Mesh filter is made of some steel mesh and it can filterate air secondary to increase the dry efficiency.   Features and Advantages（1）Compact size:- Reduces the total air dryer size- Significantly reduces the refrigerant hold-up volume（2）Highly efficient thermal performance and low pressure drop minimizes power usage.（3）Low price.（4）Easy to repair and long service life.（5）Full compatibility with the most common refrigerants. TestingAll of our 4 in 1 heat exchangers undergo a hydrostatic test of 1.5 times the design pressure with water for 30 minutes and a leak test of 1.1 times the design pressure with air for 10 minutes for the air side. After passed by the above tests, each unit is to perform 24 hours’ keeping pressure of 18 bar and conduct helium test for the refrigerant side, respectively.

Our Air Dryer range is manufactured using quality-tested material & components and at par with set quality standards.

• Features: Long functional life ,Sturdy construction ,Negligible maintenance

• Weight: 10-50kg
• Voltage: 110V
• Condition: New
• Power: 1-3kw
• Warranty: 1yrs
• Application: Vapor Removing
• Driven Type: Electric

• Weight: 380 kg
• Inlet Flow: 114
• End connection: 1"BSP
• Dimensions: 2000 * 750 * 650 mm

Features 1.Purge economizer, an energy saving device reduces purge loss to as low as 50%. 2.Programmable Controller, with clear functional displays, ensures uninterrupted operation even while tower changeover. 3.Automatic drain valves in pre and oil filter to reduce moisture load and to ensure life of desiccant at no extra cost. 4.All new Microprocessor based controller has a unique purge economizer. The dryer load can be manually set. It can also accept up to 3 compressor load/unload contact and compute dryer load dynamically. The purge is set accordingly. The controller also accepts a pressure input and purge air is controlled accordingly.

Compressed air contains considerable quantity of moisture in vapour form. The vapour will condense into liquid when the temperature drops. This will be the major cause of downtime in compressed air systems. The only way to prevent condensation is to reduce the dewpoint temperature which is only possible by installing a suitable compressed air dryer. Summits with its rich experience provides innovative solutions to produce dry air by means of using desiccant adsorption technology.   Features   • Large desiccant beds for consistent dewpoint • Reliable and energy efficient blowers and heaters • Superior high temperature pneumatic valve configuration • Conceptualized diffuser design minimizes desiccant attrition losses • Remote interfacing and monitoring in selected models • Outlet air quality according to ISO 8573-1,Table 3,Class 2 / 3

Our organization offers its clients with an advanced range of Mini Air Dryers to its clients. We make use of premium grade material and latest machines to manufacture these Mini Air Dryers. Known for their easy of operation, light weight non-corrosive steam less body, these Mini Air Dryers are used or small cleaning applications in various industries.  

Dryspell medical Dryers delivers a dewpoint of +2°C as mandated by NFPA 99. The dryspell medical dryers operates with the principle of Pressure Swing Adsorption, hence removes more moisture than a refrigeration air dryers, and it delivers moisture free dry air consistently irrespective of flow variation.Based on medical application criticality, the package comes with one working and one stand by dryers. So there is no need to stop the air dryers for maintenance. Purge saving system saves purge air upto 60% for a typical hospital load of 30% to 40%. Dewpoint and CO monitor enables ti monitor dewpoint and CO levels as mandated by NFPA 99    

The refrigerant air dryer manufacturers by Trident provide an optimum and cheapest method of drying compressed air are instilled with advanced features to record functions and faults.

• Specialities: Long service life, Highly demanded, Compact size

100 % Oil and moisture free,Air Drier with a Deu Point of Minus 40oC,Pre - Filter,Oil Removal Filters,After filters,Auto Drain System,Microprocessor based control panel

We have extensive experience in the market that empowers us in manufacturing and exporting a quality range of Hot Air Tray Dryer. This dryer machine is used to dry wet materials in food and pharmaceutical industry. We use finest quality cast iron and mild steel to manufacture this dryer. To provide a defect free range, we check this Hot Air Tray Dryer on construction and efficiency parameters. We offer this dryer at market leading prices to clients. Features: Easy maintenance Consumes less power Noise free operation 

  Refrigerated dryers are general purpose dryers, most economical being less running cost. SAI refrigerant system is environmentally friendly in nature. Refrigeration dryer remove moisture from compressed air to the desired dew point temperature. The dryer includes two separate circuits like compressed air circuit & refrigeration circuit.    SALIENT FEATURESCompact DesignRunning cost is Very LowHot Gas by-pass circuit for partial Load.Maintains Constant Pressure Dew PointAuto Drain Valve Provided for cyclone separatorNon-cyclic SystemLow Pressure DropEnvironment Friendly systemCompressor safety through maintain Low/High Constant PressureNote : High Pressure / flow range can be offered on request. Operating Pressure standard at 14kg/cm      

• WHITE: BLUE
• WHITE: BLUE

We are offering refrigerated air dryer.capacity - 20 - 300 cfm.

We are offering Refrigerated Air Dryer. Customers can buy from us refrigerated air dryer 50, which is widely used in numerous industrial applications. Appreciated for its trouble free service life and less maintenance, this is offered by us at industry leading prices. We are looking for queries from Rajasthan. With the support of our vendor’s state-of-the-art infrastructural facility, we are catering to the diverse requirements of our clients by providing an excellent quality array Refrigerated Air Dryer. This dryer is widely used in number industrial application for lowering temperature. Our offered dryer is made available in different specifications for our clients to choose from. Clients can avail this dryer from us at pocket friendly prices.   Salient  Features   High temperature compressed air (80 degree c) allowed at the inlet Reliable and high efficiency refrigeration system Stable dew point temperature Effective water vapor separator Selectable quality mechanical and electronic drainage system Integrated control panel, easy operation, easy view

Heatless Air dryer Range from 20 Cfm to 300 Cfm. Our Heatless Air dryer working pressure up to 50 kg. And its inlet Air Temperature 40 o C. Every drier is equipped with a pre-filter, oil filter and after filter. Pre filter is fitted with double seat pneumatic auto drain valve which discharge the condensate during changeover of tower. And their box frames with complete floor stand to withstand vibration and transit damage.

• Warranty: 12 months
• Material: Mild Steel
• Phase: Single
• Usage/Application: Air Drying
• Minimum Output Dew Point: -30 C
• Dryer Horse Power: 1 HP
• Maximum Pressure: 10 bar
• Drying Capacity: 250 CFM
• Automation Grade: Automatic
• Dryer Technology: Dessicant

With our huge industry experience and knowledge in this domain, we are engaged in offering Desiccant Air Dryers. The offered air dryer is developed utilizing finest quality material and contemporary techniques in order to maintain their fulfillment with set standards. This air dryer is accessible in varied specifications to fulfill ever-evolving requirements of our patrons. Our air dryer is tested under the vigilance of our quality controllers in order to deliver a defect free range.Our range of desiccant dryers are extensively used in various cleaning applications of paint spray booths, tool, valve, cylinder protection, food packaging machine, auto garage, textile & garments and many others. Our range of desiccant dryer provides total cleaning solution for lubricated as well as non-lubricated compressed air. Provided with advanced technological features, these are highly acknowledged for efficiency and uninterrupted performance

• Capacity: 10 - 2000 cfm
• Inlet Air Pressure: 3 - 16 Bar g
• Inlet Air Temperature: 10 – 60 Deg C
• Outlet Water Temperature: +3 Deg C

Air contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminate the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, instruments, etc which results in the downtime of whole system. Win Refrigerated Air Dryers remove the moisture to a level of 600 ppm (w) by using energy efficient refrigeration system and effective heat exchangers. The wet air enters into the economizer (pre cooler) of the refrigerated air dryer and the temperature gets reduced significantly by the outgoing cold air. This medium temperature air further enters in to the evaporator of the refrigerated air dryer and the temperature drops to 2oC by the cold refrigerant. At this temperature the moisture in the vapour form condenses into liquid and the same is separated by high efficient integral moisture separator and automatic drain trap. All the three components (i.e. pre cooler, evaporator and moisture separator) are integrated into one single unit. PRODUCT FEATURES → Low Pressure Drop,→ Lowest Operating Cost,→ Maintenance free,→ Compact Design,→ Power Saving,→ Constant Dewpoint @ Varying Load Condition,→ ECO Friendly Refrigerent,

Refrigerated dryers use of mechanical refrigeration system to cool the compressed air and at the same time condensate water and hydrocarbon vapor, most of these dryers cool the compressed air to a temperature of around 2 deg C which leads to a pressure dew point of 3 deg C. This is the preferred range because it allows the pressure dew point to fall with in the range that is attainable with common refrigeration system control working principle.  

Make Refrigerated air dryer quality compressed air free from dust and moisture. The drier high efficiency with less power consumption and compact size. Negotiable pressure drop and no purge air loss.Range: 10 cmf to 5000 cmf at working pressure 16 kg/cm². High pressure models also available.