Back Back
Simplex Pumping Unit, Simplex Heating Unit
We are offering simplex pumping unit, simplex heating unit. pumping & heating unit: • model name: simplex pumping & heating unit (sph) duplex pumping & duplex heating unit (dpdh) transfer pumping unit • technical name: pumping station, oil handling unit, hfo booster, on - line heater, on - line heating unit • flow rate: 50 lph – 5000lph • heater capacity: 2 kw – 120 kw • power: 0.5hp – 40 hp • product description: this unit generally used in all applications where the fuel required to be supplied at constant pressure and constant viscosity. In general, pumping unitpumping and heating unit consists of pump coupled with motor, (on-line heaters with temperature control unit), back pressure regulating valve, interconnected with seamless ms pipes, assembled on a compact tray with drain cock valve. • advantages: 0% break-down free pumping system. compact equipment. wastage of oil during transportation will be avoided. ensures effective combustion. ensures carbon-free atomizing. avoid nozzle chocking. maintains constant pressure irrespective to the head pressure. • optional accessories: flow meter, viscous meter, digital temperature control system. • safety: all necessary factors are incorporated to avoid any dangerous condition of the unit. Unit will shutsstops the fuel flow immediately after the signal point.
...more
Gas Burner
We are offering gas burner. 1562 gas burners are designed to give maintenance free operation using heavy oil, light oil, or gas. There are no “superfluities” on this burner – it has a heavy cast iron body of clean design that avoids clogging even when used on tough jobs such as forge furnaces fired with heavy oil. burners competency the total air capacity of the burners is listed under list 1 for single blower supplying at 20”wg combustion air and 22”wg atomizing air for light oil operation and 22”wg combustion air and 38”wg atomizing air for heavy furnace oil operation. Use list ii and iii when selecting separate blowers for combustion and atomizing air. For sizing blowers or burners at other pressures, add figures from the list ii and iii to get total capacity. capacities shown in list ii is for operation on gas with the air shuttled closed. On oil operation these capacities are increased 20% the additional air supplied through the atomizing air connection. When burning either gas or oil with the shutter open, burner capacities may be doubles if furnaces conditions assure sufficient secondly air. function of the burner oil with a viscosity of 70 to 90 seconds redwood I and a pressure between 25 and 30 psi, should be supplied to an air/oil ratio controller which will deliver oil to the burner at a pressure proportional to the main at all firing rates. The atomizing air pressure at the burner may be as low as 21”wg when using distillate oil, 38”wg when using heavy oil. the 1562 burners can be operating on any gas of 2000 to 12800 kcal per cu.ft heating value. Switching from gas to oil operation or oil gas may be done quickly without furnace shutdown, simply by turning off one fuel valve and opening the order. burner assembly the heavy cast iron body can stand much abuse. All internal parts of the 1562 burner are machined. The smooth surfaces stay free of oil deposits and dirt, thus greatly minimizing the need for cleaning oil is, put though the burner in a straight passage having a large cross-sectional area permitting visual inspection for clogging and easy cleanout if necessary. The burner oil valve is a non-plugging v-port oil valve which produces small and uniform flow rate changes throughout the 180°c sweep of the control handle. list 1. Air capacities in cfh burner designation 1562-3a 1562-4a 1562-5a air pressures at burner combustion 24”wg; atomizing 28”wg 4735 5935 10630 combustion 40”wg; atomizing 44”wg 6320 7670 13640 model no: 1562 size: 3 – 7a firing rate: 8 kg to 80 kg/hr (lpg) technical name: gas burner, natural gas burner, lpg burner, biogas burner, methane burner, producer gas burner. where can be used: heat treatment furnace, direct melting, aluminium melting, bale out furnace, non-ferrous melting. Tilting furnace, rotary furnace, reverbaratory furnace, salt bath furnace, re-heating furnace, ingot furnace, rolling mill, pre-heating burner. product description: a burner made with ci body has a primary and secondary air ports, supplied with air butterfly valves, burner block, precise control oil valve (sov) as a package. Burner is used in the applications, where fuel will be diesel, lpg, natural gas, producer gas etc.,this burner is specially designed to avoid localized heating. It is designed to give 100% combustion efficiency even with high carbon oil. advantages: fuel efficient by better atomization uniform heat transfer, 10% savings will be possible by interchanging with any make burner. specialties: manual operating burner, automatic burner, air/fuel ratio regulating system, mass flow control system, pressure balancing system. optional accessories: preheated combustion air upto temperature of 350◦c (max) for fuel saving upto 40%. allied products: burner block, sensitrol oil valve, precise control valve, screwed type butterfly valve, primary air control valve, secondary control valve, air/oil ratio regulator, zone control valve, pilot ignition system, uv flame sensor, pumping & heating unit, centrifugal air blower, temperature controlled burner.
...more
Drying Oven
Axis high quality ovens are generally used in the applications like, drying, curing, moisture removal etc. Oven is constructed from reinforced to any shape depending on its range from mild steel plates of suitable thickness and are supported with necessary stiffness.
Certification : CE Certified
Voltage : 220V
Driven Type : Electric
Warranty : 2years
...more
Air Oil Ratio controller
Tilting Type Rotary Furnace
We are offering tilting type rotary furnace. furnaces are the advanced design of conventional rotary furnace. Ttrf are generally used in the melting plants like aluminum recycling. Aluminium dross melting. Leadzinc recycling and dross melting, all nonferrous metals. this furnace has a fabricated tilting and stationery membrane. The furnace is made up of heavy duty mild steel sections and plates with sufficient wall thickness. Furnaces will be lined with monolithic ramming mass suitable for applications upto 1200c. Furnaces lining work will be carried out at the customer end in order to avoid breakages in transportation. furnaces will be supplied with oxy fuel system suitable for the fuels like, hsd, ldo, fo, pg, ng, cog, and lpg. Additional accessories like, fuel tank, transferring, pumping system, liquid fuel handling systems, centrifugal air blower, gas handling systems & safety systems will also be supplied. technical name: central axis tilting furnace, lip axis tilting furnace,hydraulic type tiling furnace, motorised geared type, tilting furnace, gear type tilting furnace, oil fired tilting furnace, gas fired tilting furnace, crucible furnace. Batch melting furnace. application: aluminium, copper, lead, zinc melting. product description: a cubical shell furnace, which tilts by the hydraulicmotorizedgeared mechanism for pouring out the metal directly on the mouldladle for heavy castings. Indirect type melting ensures the loss of metals due to oxidationcarbon deposit by the fuel or combustion properties. Furnace is lined with refractory and insulation brick to hold the liquid metal to a temperature of 1200oc. This furnace lining by a brick is formed with extra locks mechanically to ensure the lining the tightness and holds the crucible to not to fall of while tilting the furnace. advantages: our furnaces are designed in such a way to reduce the fuel consumption. Our furnaces are lined with both refractory bricks and ceramic fibre modules, in such a way to pass the flue gas around the crucible enabling high conduction and convection heat transfer. Combustionheating equipments are designed to meet the requirements of furnace and heat transfer rate. Burner will be positioned inclined to an angle, so that the flameflue skips on the surface of the material. Better heat transfer rate through circulation and re-circulation. Our furnaces are designed for skin temperature of 65c (maximum). specialties: manual operating furnace, automatic operating furnace, air fuel ratio regulating system, mass flow control system, pressure balancing system, flue control system. optional accessories: pre heating the scrap before charging can be done. Recuperator to pass the combustion air into the burner at a temperature of 150c (minimum) for fuel saving upto 40%. capacity: 500 kgs - customers requirement. heat generated by: light oilheavy oilfurnace oil natural gas cnglpg propanebutane producer gasbio gas lining: refractory and insulation bricks based on the temperature and operation of the furnace. best fuel achieved: 110 liters of furnace oilton of gun metal.
...more
bale out furnace
We are offering bale out furnaces are efficient and complete melting and holding units for non-ferrous metals like aluminium and brass. Easy to operate & maintain.
...more
Burners
Axis Thermal Engineering Company is one of the leading manufacturing and supplying company of burners from India.
...more
combustion equipment
Axis thermal engineering company is a well know manufacturers & suppliers of high quality combustion equipment from india.
...more
heat treatment equipment
Axis thermal engineering company is one of the leading manufacturing and supplying of high quality heat treatment equipment from india.
...more
heat treatment furnace
We are offering heat treatment furnaces are used for treatment of metals for further processing of materials. The treatment of the metal ensures the change in grain structure of the material treated. The treatment applications are ageing, anodizing, annealing, tempering, normalizing etc.
...more
heating unit
Axis Thermal Engineering Company is one of the leading manufacturing and supplying of high quality heating unit from India.
...more
Ladle Preheater
We are offering ladle preheater. Ladle used for heating refractory linings of various sizes of lip-pouring and bottom- pouring ladles. It has horizontal steel frame pivoted at its centre.
...more
Melting Furnace
We are offering melting furnace. Axis thermal engineering company is one of the leading manufacturing and supplying of high quality melting furnaces from india.
...more
metal melting furnaces
Axis Thermal Engineering Company is one of the leading manufacturing and supplying of high quality metal melting furnaces from India.
...more
Pumping Unit
Axis Thermal Engineering Company is one of the leading manufacturing and supplying of high quality Pumping Unit from India.
...more
reverberatory furnaces
We are offering reverbaratory furnace are used primarily for melting copper and its alloys such as bronze and brass, and other metals like aluminum, lead ad zinc. The furnace is supplied with refractory lining tilting arrangement and conventional compact combustion system.
...more
rotary furnaces
We are offering rotary melting furnace is a high efficient melting unit offered with pollution control equipments, used for recycling many non-ferrous metals.
...more
Tilting Furnace
We are offering tilting furnaces are supplied as complete refractory line packages with blower, burner and crucible. The durable body is constructed from thick reinforced steel plates and supported on a stand by turnnions which move on a anti-friction bearings.
...more
Hot Air Generator
Hot Air Generators supply air heated to elevated temperature by mixing it with products of combustion from a burner. It’s widely used in most applications.
...more
Centrifugal Air Blower
Axis Centrifugal Air Blowers are used in the applications, where the requirement of air for combustion, suction, blowing, venturisuction, dust collection, and scrubbers etc.
...more
Throttling Air Valves
We are offering throttling air valves. Throttling air valves -2211 features a knurled knob locking device that prevents accidental shifting of valve setting. It is easily released, then re-locked, if a new setting is desired.
...more
Electric Furnace
We are offering various types of electric furnace which includes electrical heat treatment furnaces,electrical central axis tilting furnace & electrical bale out furnaces etc.
...more
Simplex Heating Unit
We are offering simplex pumping unit, simplex heating unit. pumping & heating unit: • model name: simplex pumping & heating unit (sph) duplex pumping & duplex heating unit (dpdh) transfer pumping unit • technical name: pumping station, oil handling unit, hfo booster, on - line heater, on - line heating unit • flow rate: 50 lph – 5000lph • heater capacity: 2 kw – 120 kw • power: 0.5hp – 40 hp • product description: this unit generally used in all applications where the fuel required to be supplied at constant pressure and constant viscosity. In general, pumping unitpumping and heating unit consists of pump coupled with motor, (on-line heaters with temperature control unit), back pressure regulating valve, interconnected with seamless ms pipes, assembled on a compact tray with drain cock valve. • advantages: 0% break-down free pumping system. compact equipment. wastage of oil during transportation will be avoided. ensures effective combustion. ensures carbon-free atomizing. avoid nozzle chocking. maintains constant pressure irrespective to the head pressure. • optional accessories: flow meter, viscous meter, digital temperature control system. • safety: all necessary factors are incorporated to avoid any dangerous condition of the unit. Unit will shutsstops the fuel flow immediately after the signal point.
...more
furnace combustion system
blower repair services
Furnace Maintenance Services
rotary kiln alignment services
heat treatment furnace services
ovens repair services
Reviews & Ratings
Write a ReviewBe first to Rate
Rate This
Share your Correspondence Details to receive messages from Axis Thermal Engineering Company
