Borewell Pumps Dealers in Coimbatore

• Brand Name: Lubi
• Number Of Stages: Multi Stage Pump
• Motor Horse Power: 1HP-7.5HP
• Head: 568 Metre
• Maximum Discharge Flow: 100 - 500 LPM
• Voltage: Single Phase 220V, Three Phase 380 - 400V, 50Hz, AC Supply
• Discharge Outlet Size: 4
• Power Rating: 0.37 kW - 5.5 kW (0.5 HP - 7.5 HP)
• Pump Housing: SS 304 / Cast Iron / Noryl

• Type: Borewell Submersible Pumps
• Application: Industrial, Submersible
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warrenty: 1 Year, 2 Years
• Color: MUlticolor

Being a client-focused entity, we are involved in providing Borewell Submersible Pumps. Applications: - Residential and commercial places Use.Huge assortment of Borewell Submersible Pumps is offered by us, these products are appreciated among the customers due to their supreme quality

• V4: Single Phase - upto 650 Feet  Three Phase - upto 1000 Feet
• V6: Three Phase - upto 1200 Feet

• Number Of Stages: Multi Stage Pump
• Motor Horse Power: Upto 150 HP
• Brand Name: Cactus / KGF
• Type: Borewell
• Motor Phase: Three Phase
• Head: 700 mtr
• Maximum Discharge Flow: 1001 - 5000 LPM
• Discharge Outlet Size: 1 inch to 8 inches

• Country of Origin: India
• Motor Horse Power: 1 - 3 HP
• Motor Phase: Single Phase
• Head: Less than 15 m
• Maximum Discharge Flow: 100 - 500 LPM
• Power Source: Electric
• Brand Name: V R B
• Motor Speed (RPM): 2800 RPM

As a respectable firm, we bring forth the best quality 4" Borewell Submersible Pump to our customers. We specialize in manufacturing, supplying and exporting the best quality Borewell Submersible Pumps which are available in varied grades and dimensions. Our Borewell Submersible Pumps are highly-efficient and is used in drip water irrigation system, industries, etc. Moreover, we offer Borewell Submersible Pump at the market leading price range. Specifications : Power Range 0.5 HP to 6 HPVersion 240V/415V, 50 Hz, A.C.-1/3Ph.Flow Rate 20 lpm � 360 lpm.Delivery Head 7 � 350 mts.Delivery Size 1"� 2"Speed 2880 rpm

• Type: 0.5HP-10 HP
• Brand Name: Torren Pumps
• Material: Cast Iron/ SS/ Brass
• Application: Agricultural/ Irrigation, Sprinkler And Drips, Domestic, Farms, Lawn, Gardening, Pressure Booster

The Torren 100 mm 4” borewell submersible pumps stand at the forefront of technology, offering energy efficiency and noise-free operation. These lightweight agriculture pumps are engineered for easy installation and are specifically crafted to withstand high axial thrust loads, ensuring versatility across various applications.   With over five decades of experience in agriculture pump manufacturing, our R&D team at Torren Pumps is known for their innovation. They continuously strive for improvement, dedicating their expertise to produce efficient, durable, and robust 2 HP pumps.

Columns (s) gives level of water at working condition.Water outflow through delivery pipe will be pulsated and not continuous.The discharge of water will greatly depend on the yield of the bore.

• Application: saline water, muddy or dirty water, bore collapsing
• Power: Ac Voltage
• Country of Origin: Coimbatore
• Brand Name: BAC Compressor
• Cylinder: Shell moulded cylinders
• Bearings: Original SKF Bearings

A Borewell compressor pump works by forcing compressed air into bore through a pipe. The compressed air and water mix together resulting in a mixture that is less dense than the surrounding water and therefore flows upward through the pipe. BAC made its mark in India with its borewell compressors. BAC has been the tier one player in borewell compressor pumps since decades. We have supplied to customers with depths ranging from 50 feet to 1500 feet. Unlike other manufacturers we have special models for the borewell segment to obtain the maximum possible efficiency. We are one of the leading Borewell Compressor pump manufacturer in Coimbatore with thousands of installations so far. When comparing to a submersible pump a borewell compressor has the following advantages, 1.Can work in saline water (salty water) effortlessly compared to submersible pump that has salt sedimentation on the impeller if not used regularly, can cause breakdown. 2.Borewell compressor can work if muddy or dirty water. 3.In a borewell compressor, no damage is done if there is no water in bore. In submersible there are chances where the pump will dry run and cause motor failure. 4.Installation is much cheaper 5.Cost of repairing a submersible pump is very high as the pump will have to be pulled out from the bore. But the borewell compressor is always on ground level so any service can be done quick and cheap. 6.Borewell compressor is preferred in areas where there is a chance of bore collapsing. The submersible pump cannot be pulled out once the bore has collapsed. Despite the many advantages of borewell compressor there are few drawbacks such as, lower discharge compared to a submersible and high noise level if not isolated properly.

C.R.I. 80 mm (3") Submersible pumpsets are built with thermoplastic impellers, diffusers and inbuilt check valve. All vital components of these pumpsets are made of corrosion resistant thermoplastic and the shaft is of SS 304410. Pumpsets are multistage centrifugal type. The optimal design of impellers and diffusers enables the best possible hydraulic efficiency.

NEC Bore well Air Compressor Pumps are designed for domestic , Industrial and agricultural purposes are provided with high operating efficiency compressor that can draw water from depths of 100 ft. to 600 ft.They are assembled with special duty Compressor Motor for quality & reliability and manufactured and Tested to high standards of excellence. Connected water columns; the heavier one. On balancing over the light one. On operation the compressed air is pumped down the well and gets mixed with water in the discharge pipe as very fine air bubbles by the Air distributor installed at the end of the Air pipe line.

• Power Range: 0.37 kW – 1.1 kW (0.5HP-1.5 HP)
• Speed: 2900 RPM
• Version: Single phase 200-240V,50 Hz, A.C. Supply
• Maximum total head: 93 m
• Maximum flow rate: 5.4 m3 /h
• Maximum Outer diameter in mm: 78
• Normal outlet size in mm: 25,32 & 40
• Degree of Protection: IP 58
• Direction of Rotation: Clockwise from driving end
• Thrust Load: 1500 Ibs
• Minimum cooling flow along the motor: 0.15 m/sec
• Type of Duty: S1 (continuous)
• Method of starting: Capacitor Start and Capacitor Run (CSCR)
• Maximum starts per hour: 20 times
• Mounting Standard: As per NEMA
• Material of Construction of Pump: --------------------

• Available in single and double cylinder design.: Requires no priming.
• Easy installation and maintenance.: Can be installed in more than one bore based on the water levels.
• Easy belt alignment of compressor with the motor ensuring higher efficiency and close to zero maintenance.: Rigorous quality control checks at every stage of manufacturing to ensure high degree of reliability.
• Sound in design and Robust in construction withstanding overload.: Dynamic balancing of rotors ensuring vibration free performance.

Suguna Submersible motor is a squirrel cage water cooled and water lubricated induction motor. The pumps are of radial mixed flow type pumps. The bearings are water lubricated.Submersible pumps are for purifying water from deep wells using submerging in water. Stainless Steel Motor, housing for longer life, High Quality imported Carbon thrust Bearing to work at lower voltages, Stainless Steel Shaft with Coupling, High Quality Noryl impellers, Diffuser and Pump casing.

• Supply Voltage: Single Ph 220V + 10% -15%
• Speed: 2820 rpm
• Maxi. Permissible sand in wate: 25 g / m3 (max)
• Pumping liquid: Clear cold fresh water
• Hardness of water: 300 (max)
• Water temperature: 33 C

ALTUS 100mm ( 4”) Bore well Submersible pump sets offer trouble free operation lifting water to new heights from new depths. The pumps are manufactured under exacting quality control measures to offer longer life and higher efficiency. The computerized design allows varied voltage operation.   The ALTUS Submersible pumps are ideally suited for Industrial and residential use, Multi storeyed buildings, Agriculture and Horticulture farms and Public water supply systems. 

Pump contracted by Stainless steel pipe, Noryl Glass Filled casings, impellers and SS410 shaft. Stator body contracted Stainless steel pipe. Stator made by laminated stamping winding with electric grad copper wire and high quality insulated materials. Dynamically balanced Rotor made by laminated stamping, copper/aluminum and SS410 shaft. Bush made by LTB4. Trust pad set made by C.I. Casting, carbon and Stainless steel.

Taro Bore well submersibles are manufactured both in radial and mixed flow designs. The motor portion is a squirrel cage wet type water cooled induction motor with stainless steel stator shell to prevent rust formation. Specially designed thrust bearing is provided for long life. Available in 3, 4, 5, 6 and 8 inch sizes.

4" Submersible Genie Series 5" Submersible Nile Series Nile+ Series 6" Submersible Delma Series Binda 6D Series 6/7, 6/8, 8/10 Combination Submersible Congo Series 8" Submersible Bhima Series 5/4", 6" Stainless Steel Submersible Nile+ Series steelix Series