Centrifugal Casting Dealers in Coimbatore

This process can be Sand Mouldegorized as similar to that of  permanent mold method, Here as the molten metal is being poured,  a permanent metal mold revolved about its axis at high speeds ranging from 300 to 3000 rpm. This can be in horizontal, vertical or inclined positions. As a result, the molten metal is centrifugally thrown towards the inside mold wall. There is solidifies after cooling. It’s usually a fine grain casting with a very fine-grained pouter diameter. Molds for Centrifugal castings can be divided into three types : The Permanent Mold:  Made of steel, iron or graphite. Inside surface is coated with a thin refractory wash to increase mold life. The mold is preheated before coating, so as to dry the coating and improve the adherence to the mold surface.  Rammed Mold: It consists of a steel metal flask, lined with a layer of refractory molding mix. The inside lining is coated with a refractory wash which is baked until dry and hard.  Spun or Centrifugally Cast Mold: In the metal flask a predetermined mass of refractory materials in slurry form is poured.The flask on rotation makes the refractory materials centrifuged onto the wall of the flask. The rotation is stopped and the liquid portion of the slurry drained off. It leaves the mold with a refractory coating, to be baked until dry before use. Features of Centrifugal Casting :  Castings can be made is almost any length, thickness and diameter.  Different wall thicknesses can be produced from the same size mold  Eliminated the need for cores.  Resistant to atmospheric corrosion, a typical situation with pipes.  Mechanical properties of centrifugal castings are excellent  Only cylindrical shapes can be produced with this process.  Size limited are up to 3m (10 feet)  diameter and 15m(50  feet) length  Wall thickness range from 2.5mm to 125 mm (0.1-5.0in)  Tolerance Limit : On the OD can be 2.5 mm (0.1 in ) on the IS can be 3.8mm(0.15in)  Surface finish ranges from 2.5 mm to 12.5 mm(0.1 -0.5in)rms   AppliSand Mouldion :Typical materials that can be cast with this process are iron, steel, stainless steels and alloys of aluminium, copper and nickel. Two materials can be cast by introducing a second material during the process. Typical parts made by this process are pipes, boilers, pressure vessels, fly wheels, cylinder liners and other parts that are ax-symmetric. Type of Centrifugal Casting:  Semi-Centrifugal Casting  Centrifugin

Centrifugal casting process is employed to create thin walled cylinders which are noted for its quality especially for the accurate control of the structure. This casting is mainly used for the production of semi finished products that can be further machined to attain good results. A fixed mold rotates continuously in the centrifugal casting. The rotating mold spreads the molten metal centrifugally where it get the structure after cooling.

We manufacture range of pump sleeves that are highly durable. Made from high quality raw materials, these pump sleeves have found their application in various industries.

Centrifugal casting process is employed to create thin walled cylinders which are noted for its quality especially for the accurate control of the structure. This casting is mainly used for the production of semi finished products that can be further machined to attain good results. A fixed mold rotates continuously in the centrifugal casting. The rotating mold spreads the molten metal centrifugally where it get the structure after cooling. We are one among the very few quality professionals who have mastered this process in the foundry industry within India. Our products casted using the centrifugal casting process are known for their precision, toughness and long lasting life when they are assembled into finished machineries from a variety of industries.

Centrifugal casting In our concern we produce moulds using the graded sands of iron coated. the gas freely from the mould while the molten metals are poured

Centrifugal Casting, Sintered Bronze Bush, Phosphor Bronze Worm Gear

Centrifugal Castings

centrifugal pump casting, gray iron casting, Alloy Steel Casting

centrifugal die casting