Centrifugal Pumps Dealers in Avinashi Road, Coimbatore

• Capacity: Up to 3000m³ /hr
• Temperature: Up to 110° C

The horizontal mixed flow pumps are used to pump clean, turbid and slightly contaminated liquids. It can be used for sewage works, irrigation, drainage and for pumping sea water and in the sugar industry.

• Size: 350 mm
• Temperature: 140° C
• Capacity: 2250m³/hr

Paper stock pumps are known for their heavy duty, centrifugal design. It is designed for handling paper stocks and pulp up to 7% consistency. It is also suitable for heavily contaminated liquids.

CENTRIFUGAL MONOBLOC PUMPS (SINGLE PHASE TWO & THREE PHASE*) APPROXIMATE PERFORMANCE AT 2880 RPM, 240 VOLTS, SINGLE PHASE, 50 HZ OPERATION. Slow Speed High Speed Pumps, High Grade Cast Iron Body, Cast Iron Impellers, Single Phase Three phase.

We bring forth our client a qualitative range of Centrifugal Monoblock Pump Sets, in different range, features and models. These procured from reputed vendors in the market and are in compliance with the prevailing industry standards. Our range caters to the varied requirements of the clients and is made available in different specifications as per their requirements. Moreover, our range is available in the following types: * KDS+/ GMC (Three Phase Monoblock Pump) * KS+ (Four pole Monoblock Pump) * KDT+ (Two stage Monoblock Pump) Attributes: * Flatter efficiency curve for efficient operation * Designed to prevent overloading and motor burning * Designed for automatic air release during priming * Efficiency at par with International pumps * Dynamically balanced rotating parts ensuring minimum vibration during running Class ‘B’ / ‘F’ insulation * Replaceable wearing parts * Models with IP55 protection Range: * Delivery up to:150 mm * Discharge range: up to 72 lps * Total head range: up to 110 meters * Power rating: 0.37kw - 22kw (0.5HP-30 HP) * Voltage Range: 300 - 440V (3Ph) * CI / Bronze MOC Impellers * Gland packed/ Mechanical Seal Version Applications: * Air-conditioning system * Utility water supply * Cooling towers * Fire fighting washing equipments * Industries for clear water pumping * Sprinkler, drip irrigation * Booster pump in fire fighting system * Textile humidification plants

• Head: 15m
• Material: Mild Steel
• Frequency: 50Hz
• Voltage: 220V
• Country of Origin: Made in India
• Power: 1HP
• Usage/Application: Industrial

Features Extruded Powder Coated Aluminium Body Double Sealed Ball Bearing TEFC Motor, Capacitor Start And Run Fitted With T.O.P (Thermal Overload Protector) Noryl / Gunmetal / Cost Iron Impellers

We offer supreme quality Centrifugal Process Pump that is used to facilitate draining in case of any leakages. Our Centrifugal Process Pump consists of top center line discharge, fully confined gasket and self-venting casing which are arranged for back pull-out. The Centrifugal Process Pump is widely appreciated for its quality and performance. We are appreciated for manufacturing Centrifugal Process Pump that is supplied to the clients within targeted time frame. Attributes Minimal friction Shaft designPerfect sealingEasy replacementIron castedSturdy constructionAbrasion resistant Applications FoodPharmaceuticalCosmeticBreweriesDairy Industries.

DESCRIPTION: Model : MEGA-100 HP / kW : 1/0.75 Pipe Size : 1" x 1"(Inch) Weight : 9kg

• Type: Multistage Pumps
• Weight: 100-150kg, 150-200kg, 200-250kg, 250-300kg, 50-100kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Application: Industry
• Automatic Grade: Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric
• Pressure: High Pressure, Low Pressure, Middle Pressure
• Structure: Horizontal
• Warranty: 1year, 2years

• Type: • Single Phase 240r/50HZ/2880rpm S1/ASR with Thermal Overload Protector/class ‘B’ insulation. • Three Phase 415v/50HZ/2880rpm/1440 rpm S1/Star & Polta/class A insulation.
• Degree of Protection: IP 44/IP54
• Max Flow Rate: 24 m3/hr(6.6 l/sec)Single Phase 240m3/hr(66l/sec)Three Phase
• Power Rating: 0.37-1.5 KW single Phase (0.5-2.0 HP), 0.75-7.5 KW-Three 7Phase (1.0-10 HP)
• Maximum operating Pressure: 3.5kg/cm2(35 mtrs total head)Single Phase 55kg/cm2(55 mtrs total head)Three Phase
• Sealing: Mechanical seal/oil seal with Asbestos Rope
• Maximum suction Lift: 7 mtrs
• Maximum Liquid Temp: 35°C
• Maximum Ambient Temp: 43°C
• Minimal Pumpsizes(inch): 1*1;11/4*1;11/2*11/2;2*1/2;2*2;21/2*2;3*21/2;4*3;4*4;5*5;6*6

• Power Rating: 0.55 HP

Long coupled pump Corrosion resistant stainless steel body, Specially designed motor works at low voltage, High electrical and mechanical efficiency, Specially designed bearing to withstand axial thrust loads.

Heavy duty centrifugal design, Conforming to DIN 2425, Open Impeller with renewable front wear plate, and Closed impeller with wear ring., End suction top centre line discharge, Simple external adjustment for Impeller wear, Gland Packed mechanical seal.

• Capacity: Up to 3500 M³/Hr
• Head: Up to 45 Mtrs (145 Feet)
• Temperature: Up to 100°C (212°F)
• Casing Pressure: Up to 16 Kg / cm²
• Pump Size: DN 200 mm to DN 450 mm
• Speed: Up to 1750rpm
• Direction of rotation: Clock wise from Drive End
• No of models: 10 Models.

Mf type pumps are used in sugar industry, sea water desalination plants, power stations, steel plants and absorption plants in environmental engineering & etc., handling of all types of clear â�� non aggressive liquids, turbid or slightly contaminated liquids, raw water, sewage water, sea water, low concentration cellulose suspensions & etc horizontal back pull out design pumps. Closed and open impeller construction with discharge branch arranged tangentially upwards horizontal. Bearings are oil lubricated and grease lubrication is optional salient features - low head and high discharge - steady flow - high efficiency - sturdy construction - low npsh - noise & maintenance free - environment friendly material of construction graded cast iron, 2% nici and bronze operating range capacity : up to 3500 mâ³hr head : up to 45 mtrs (145 feet) temperature : up to 100â°c (212â°f) casing pressure : up to 16 kg cmâ² pump size : dn 200 mm to dn 450 mm speed : up to 1750rpm direction of rotation : clock wise from drive end no of models : 10 models.

• Super low voltage: 100 V to 200V

Dynamically Balanced Rotor with Shaft and Impellers TEFC, Capacitor Start and Run Motor Built in Thermal Overload Protector (TOP) to protect the motor from burning Double Shield Ball bearing with life long lubrication Sturdy motor design to withstand wide voltage For various field conditions, pumps available in different voltage bandwidth. High Head Low Discharge, Medium Head Medium Discharge and Low Head High Discharge options All Models are available with Three Phase options.

• Max Flow Rate: Max 90 lpm
• Head: Max 30 m
• Suction Lift: up to 7 m
• Liquid Temp: upto 50° C
• Motor: 2 pole Induction motor
• single phase: 230 v +5% -15%

Application:   Domestic Water SupplyHome Pressure BoostingGarden/FountainsOver Head TanksConstruction SiteFeatures and Benefits:   Cast Iron Casing and BraketBrass/Stainless Steel ImpellersStainless Steel ShaftBuilt in Winding ProtectorInsulation Class F/B

Silent Features Body: Aluminum extruded motor body Motor shaft: High Quality alloy steel Insulation: Class ‘B’ Impeller: Cast Iron Impellers Mechanical seal: High quality mechanical seal with Graphite face Speed: Slow Speed / High Speed Pumps Single Phase / Three phase APPLICATIONS Domestic / Agricultural use / Industry Fire Fighting Water Circulation INSTRUCTIONS An Arrow cast on the pump casing indicates the direction of rotation. The pump casing to be filled with water before initial starting. INI ever run the unit with gate valve closed. To avoid rust formation in the pump casing, RUN the unit for a few minutes daily.

Centrifugal monobloc pumps and impellers are well designed to provide the best possible hydraulic efficiency and suction lift characteristic.these pumps are powered by a totally enclosed fan cooled ac induction motor,suitable for long hours duty.motor stator is made of low watt loss steel lamination assembled under pressure and rigidly locked in the frame.well balanced rotor ensures vibration and noise free operations.the varnish impregnated windings made of enameled copper wire offer excellent resistance.shaft is made of quality steel,precision ground of ample size for transmitting the rated horsepower.

• Range:: 0.5HP, 1.0HP, 2.0HP

Owing to the huge demands of customers, we are involved in manufacturing and supplying Centrifugal Monobloc pumps. Technologically advanced machines and high quality components are used in manufacturing these products. These pumps are used in various applications like irrigation, fire lighting, dewatering of mines, booster application, etc..Available in different specifications to suit the demands of customers in efficient manner, these pumps are demanded in the market.

• Motor Capacity :: 0.5HP & 1.0HP (240V, 50 Hz Single Phase AC supply)
• Speed :: 1440 RPM
• Head Range :: 6 mtrs to 36 mtrs
• Discharge Range :: 25 Lpm to 60 Lpm
• Pipe Size in mm :: 25x25
• Suction Lift :: 7mtrs

Vikram’s Slow speed centrifugal mono block pump sets made out of rigid, close grained cast iron and other high quality raw materials are compact. Efficient and rugged pumps meant for domestic and commercial applications

Centrifugal Pumps, Electric Motors, Submersible pumps

• Brand Name: TECH-MO
• Material: COPPER
• Application: DOMESTIC AND AGRICULTURE
• Condition: NEW
• Usage/Application: SINGLE AND THREE PHASE

Air Compressor Pump, Three Phase Electric Motor Pump

Pump, Submersible pumps, Electrical Goods, switch boards, Wires, Cables

Centrifugal Pumps

self priming centrifugal pumps, Openwell Submersible Pump, V4

Cast Iron Deep Well Hand Pump, Cast Iron Hand Pump, Afridev Hand Pump

Centrifugal Pumps, Jet Pumps, Stainless Steel Pumps, Submersible Motors

Centrifugal Pumps, Self Priming Pumps, Submersible pumps, Boiler Feed Pumps

three phase centrifugal pumps, Self Priming Pumps