Chillers Dealers in Sidco Industrial Estate, Coimbatore

The Air Cooled Chiller, which we offer, is manufactured as per the set industrial standards and norms. We offer premium Air Cooled Chiller at competitive rates to the clients. We are among the reliable sources to get the best Air Cooled Chiller. Highlights Use special compressors from Copeland, Danfoss and Bitzer, having a capacity from 5TR up to 20TR with Single Compressor System Also, Multiple Compressor Systems are availableVaried range of Refrigerants available such as Freon R 22, R 404a, R 407c, R 507, R 134a, etc.Low NoiseLow VibrationLow Failure rateCompact modular design Maximum accessibility Total connectivityReliable and High Efficiency and High Performance Scroll Compressor Tropicalised design for high ambient temperatures up to 52 degree CBrazed Plate EvaporatorWide Choice of Capacities and EfficienciesEasy installationBetter part load efficiency with multiple compressorsPositive pressure designLower electrical infrastructure cost Available with heat pump application

• Brand Name: Gireesh

We are offering chiller, chilled water is used to cool and dehumidify air in mid to large size commercial, industrial facilities like water chillers can be either water cooled chiller or air cooled chiller whenever a chiller's heat rejection can be used for a productive purpose, in addition to the cooling function. air cooled chillers are intended for outdoor installation and operation. Air cooled machines are directly cooled by ambient air being mechanically circulated directly through the machine's condenser coil to expel heat to the atmosphere.

COOLFAB EQUIPMENTS are the designer and manufacturer of Chilling Plants, Air-cooled Chillers use special compressors from Copeland, Danfoss & Bitzer. Starting from CF AC-1TR Capacity up to CF AC- 100TR Capacity with Single Compressor System, and then after we offer multiple Compressor System, as per requirement In compact design covering minimum floor area. Chillers are available with varied range of Refrigerants like Freon R 22, R 404a, R 407c, R 507, R 134a etc. Chillers are provided with wide operating range, Low Noise, Low Vibration, Low Failure rate, and in compact design and maximum accessibility and total connectivity.   Components Of An Industrial Chiller   The mechanical compression cycle has four basic components through which the refrigerant passes: (1) the evaporator (2) the Refrigeration Compressors (3) the condenser (4) the expansion valve. The evaporator in the chiller will operate at a lower pressure and lower temperature than the condenser.   Salient Features   Mobile compact & space saving. Easy to install & low maintenance cost.  Lowest power consumption.  Energy efficient air / water-cooled compact chillers suitable for working in high ambient conditions. Manufactured & Design as per customer application. Control panel, visual function & fault indicator, and Digital temperature controller. High / Low pressure gauges & Cutout with miniature circuit breaker systems. Mimic display on panel. pre-dispatch tested. Low noise running and no pollution. Performance Details Chiller Shell & Tube type/PHE with insulated. Condenser Air Cooled/Water Cooled Shell & Tube. Housing with easy access to all components. Suction gas cooled fully hermetic compressor with crank case heating. Sight glass with moisture filter, dryer, cooling agent and oil. Control panel, visual function & Digital temperature controller. LP/HP Switch and LP /HP Gauges and Cut out with miniature circuit breaker system. Function control of all main components with visual indication. Electrical cabinet accommodating all necessary power and control components. APPLICATIONS A Chiller can be realized as a refrigeration system that cools water. Air conditioners and dehumidifiers condition the air while a chiller, using the same refrigerating operations, cools water, oil, or some other fluid. This chilled solution can then be used for cooling in a wide range of operations. Some of the most common applications are as follow:   Plastics Industry: Cooling the hot plastic that is injected, blown, extruded or stamped.Printing Industry: Cooling warm rollers due to friction and ovens curing the ink, along with ultraviolet lamps also for curing purposes.Medical Industry: MRI Systems-The hospital MRI units need to be cooled to operate properly.HVAC Industry: Large scale air-conditioning systems pump this chilled water to coils in specific areas of high rise buildings. The air handling systems for each area open and close the water flow through specific area keeping the air of the rooms at a desired temperature.Laser Cutting Industry: Technology has created machines that can cut out very specific steel products with the precise use of a laser cutting machine. These lasers run at very high temperatures and must be cooled to run properly.Brewery Industry: The cooling of the kettles in fermentation has become an upcoming industry where chiller has been used to keep the kettles and storage area of beer at cold temperatures.

Water Cooled Chillers : Water cooled chillers are typically indoor installation and operation, it’s are cooled by a separate condenser water loop and connected to outdoor cooling towers to expel heat to the atmosphere. Quality Control: Our chillers are compact design covering minimum floor area. low cost maintenance, break throw technology and long life serviceability Chilled water temperature can range from 1.5°C to 7°C We manufacturing chillers range from 0.5 TR to 250 TR Function Of Water Cooled Chiller The Water cooled chillers are normally packaged, complete and closed-loop systems Include the condenser, pumps, chiller, temperature control systems and associated valves. Circulates water or any other coolant at constant pressure and temperature. The coolant flows from the chiller to the point of application and back again. Refrigeration is used as the cooling process in most of the industrial chillers. Some depend on air or water that flows over the coils containing a specific coolant in order to regulate the temperature. The coolant that is used most commonly in process chillers is water, though coolant mixtures are employed frequently. The latest development in industrial water chillers is the utilization of water cooling rather than air cooling. The condenser cools the refrigerant with water and not air. A cooling tower cools the air, thus reducing the need for energy as well as the chiller size. This is because of the condenser's small surface area and the lack of cooling fans which minimizes the noise levels too. Water Cooled Chiller Application Chilled water or other liquid from the chiller is pumped through process or laboratory equipment. Industrial chillers are used for controlled cooling of products, mechanisms and factory machinery in a wide range of industries like. Plastic industry in injection and blow moulding, Metal working cutting oils, welding equipment, Die-casting and machine tooling, chemical processing, Pharmaceutical formulation, Food and beverage processing, Paper and cement processing, Vacuum systems X-ray diffraction Target chiller used to cool high-heat specialized items such as MRI machines and lasers, and in hospitals, hotels and campuses. The chillers for industrial applications can be centralized, Decentral chillers are usually small in size (cooling capacity), usually from 0.2 tons to 10 tons. Central chillers generally have capacities ranging from 10 tons to 100 Specifications When determining industrial chiller specifications, the following aspects need to be taken into consideration: Source of power Chiller rating Capacity of the evaporator and condenser Cooling capacity of the chiller Type of the evaporator Ambient temperature Material of evaporator and condenser Type of fan Expectations of efficiency Materials of plumbing and piping Limits of noise level Number of compressors and their type Number of  circuits Fluid leaving temperature Coolant requirements Type of refrigerant

• Weight: 1000-2000kg
• Driven Type: Electric
• Cooling Capacity: 11kw
• Voltage (volt): 220 - 380
• Usage: Industrial Use

We are leading manufacturer of Chiller in india, and also we offer a full range of chiller services, installation. JC Equipments having 23 years of experience and in all industrial cooling applications and High quality design by our designing teams.The chiller with the aim of removes the heat from a liquid via a absorption refrigeration cycle and chiller is mostly used in heat processing industries.   Vital parts of Air Conditioning Units are, Compressor, Condenser and Evaporator. Air Conditioner Chiller Works It's impossible to understand with air conditioner chiller works. The air conditioner's chiller Components are condenser and evaporator. They are moreover as well-known as the heat exchanger units and also the chilling system is able to integrated with supplementary heating systems such as boilers and solar panels and others.   Chiller Applications The chiller is used in following industries, Plastic industry, Power Generation Plants Welding Plants Chemical Processing Industries Food Processing Units Ssemiconductors, Cement Industries Power Generation Plants Compressed air and gas cooling.

We carry out installations, preventive, maintenance, servicing, anti becterial treatment and repair of both domestic and commercial air conditioning units and refrigeration equipments.

• Specialities: Accurate dimension, Flawless finish, Optimum strength

• Type: Oil Chiller
• Certification: ISO 9001:2008 Certified
• Country of Origin: India

Plate Chiller, Pressure Vessel, Chemical Reactors, Piping Systems

Industrial Chillers, General Mechanical Components, press tools dies