Concrete Equipment Dealers in Palakkad Road, Coimbatore

Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.

• EASY OPERATABLE: GOOD FINISH

Manual Model: This machine has two separate working stations powered by 10 HP hydraulic power pack. Each station(mold) has the separate hand operated values to activate pressing and lid cylinders. By proper timing of the cylinder operations through a valve, maximum production can be achieved. Automatic Model: The automatic machine can be easily operated by simple pressing of a push button for each cycle of the mold. The cycle logic is very well designed with a PLC which will operate the first station and subsequently next station will start operating on its own without any time delay.

• Type: 860
• Brand Name: IMW
• Condition: NEW
• Place of Origin: COIMBATORE
• Machine Weight: 1000 KG
• GREEN COLOUR: BLUE COLUR

Item Code: 860 It is an egg laying type Hydraulic Concrete Block Making Machine on wheels, Which will lay block on the concrete Floor and move to the next laying. Any type of concrete blocks can be produced with Consistent quality by fixing different types of concrete mould and ram in the machine. 860 MODEL SINGLE VIBRATOR DOUBLE VIBRATOR TRIPLE VIBRATOR Total Power 3 Phase 415 V 5 H.P 6.5 H.P 8 H.P Hydraulic Motor 3 H.P 1440 rpm 3 H.P 1440 rpm 3 H.P 1440 rpm Vibrator Mould Motor 1.5 H.P 2880 rpm 3 H.P 2880 rpm 3 H.P 2880 rpm Vibrator Ram Motor _ _ 1.5 H.P 2880 rpm Travel Motor 0.5 H.P 1440 rpm 0.5 H.P 1440 rpm 0.5 H.P 1440 rpm Weight without Mould & Ram 1000 kg (approx) 1150 kg(approx) 1300 kg (Approx) Vibrations 6000 Hz Amplitude Adjustable Operating Pressure 140 kg/cm2 Moulding Area 860 x 600 mm Dimensions 2000 x 1500 x 2000 mm Production Capacity 40 - 50 Strokes / Hour 400 x 100 x 200 mm 8 block/stroke - 2500 - 3200 / Shift 400 x 150 x 200 mm 5 block/stroke - 1600 - 2000 / Shift 400 x 200 x 200 mm 4 block/stroke - 1200 - 1600 / Shift

The MEC 1720 is an egg laying hydralicallyoperated concrete block making machine, with with integrated mix feeder and Hooper.There are two seperate vibrators for moulds and two seperate vibrators for ram, to achive the maximum strength.

Robust construction,Minimum maintenance,High performance,Easy installation,Size: 850 × 450 × 40 mm,Power: 21 kw,Capacity: 960 pcs h

Hydraulic Concrete Block Making Machine

concrete block machines

Concrete Block Making Machine, Metal Pallets, mobile cabins