Cooling Systems Dealers in Coimbatore

• Application: Hydraulic and Industrial Process
• Weight: 100-120kg
• Phase: Three Phase
• Brand Name: JE
• FAN voltage: DC 12V
• Packaging Details: Standard Export Packaging
• Cooling Capability(kw): 3 - 300
• Supply Ability: 10 Unit/Units per Day
• Capacity: 3 ton
• Cooling Capacity: 116. 1KW

• Brand Name: PRECISION COOL TECHNOLOGIES
• Size: 26
• Model Number: SC122
• Material: MS

Specifications - capacity 1 tons, 12000 btuhr supply cold air 2 no's power - 1 ph, 230 v, 50hz amphere - 10 amps refrigerant - r22.

• Voltage: 230 V
• Application: Temperature Control/Humidity/Filtration
• Brand Name: Vajraa
• Material: Steel

• Color: Black
• Power: 1-3kw
• Voltage: 220V
• Type: Three Phase Electric Motor
• Weight: 20-30kg, 10-20kg
• Country of Origin: India
• Pressure: Medium Pressure Low Pressure, High Pressure
• Phase: Three Phase

LOC – Cooling systems with three-phase AC motor For industrial use – maximum cooling capacity 45 kW   The LOC cooling system with three-phase AC motor is optimized for use in the industrial sector. The system is supplied ready for installation. An integrated circulation pump makes it possible to cool and treat the oil in a separate circuit – offine cooling. The cooling system can also be equiped with OLAER filter unit. Together with a wide range of accessories, the LOC cooling system is suitable for installation in most applications and environments. the maximum cooling capacity is 45 kW at ETD 40 °C.

Target equipments evaporator cooling system division manufacturing includes of Evaporative cooling performance which installed outside of wall, brings fresh air into room by air distribution pipe with lowest power consumption, allows door and windows open, make your workshops and offices, factories cool in hot weather to be possible by paying 80% less power consumption to get best productivity and highest working efficiency. This dynamic due to changes in external temperature and humidity level. Under typical operating conditions, an evaporative cooler will nearly always deliver air cooler than 27°C (80°F). A typical residential 'swamp cooler' in good working order should cool air to within 3–4°C (5–7°F) of the wet-bulb temperature. Target cooling machines ensure even & continuous water distribution which in turn gives higher cooling efficiency .Water distributor used will not allow circulating water to leak/to fall fan motor or to deviate its flow. Even water distribution will ensure higher cooling. Residences Offices Hotels Hospitals Showrooms Banks Commercial complex Shopping malls Cinemas Auditoriums Textile factories Computer rooms Animal house Green house generators rooms gas turbine intakes industrial cooling for shop floors spot cooling for hotspot comfort cooling for offices,Poultry etc.., commercial agriculture Advantages Less expensive to install Less expensive to operate Ease of Maintenance Ventilation air

• Material Grade: SS304
• Material: Stainless Steel
• Capacity: 200 Ltr.
• Temperature: +7 to 12 Deg C
• Pump Power: 0.5 HP
• Compressor: R22

• Features: Designed for 3 modes of operation (ie.) Cooling, Heating , Vent.,Efficient cooling with minimal power consumption.

Defence Air Conditioning Unit (DACU) is a wall mounted Air conditioning system which caters the cold air requirement to communication shelters, Power source operating cabin, Military tent and other defence requirements.

An Evaporative Water Cooling System offers effective cooling by combining water evaporation, which is a natural process, with a reliable and simple air-moving system. In an Evaporative Water Cooling System, air from the outside is pulled via moist pads, where evaporation cools it and is circulated in a building or a house with the help of a large blower. During this process, the temperature of the air in the outside gets reduced as much as thirty degrees. We make Evaporative Water Cooling System available at highly affordable prices. Features Compared to the conventional systems, the fill type system attains maximum saturation.The design is compact and pre-fabricated, consumes less space, which is only about forty percent of that occupied by conventional systems.There is no requirement for masonry work and can be placed outside the building too.Consumption of power is negligible when compared to spray machines. This is due to low drop in pressure and low pump.The level of maintenance is also negligible since no nozzle is used. This promises trouble-free service.Since there are no nozzles of high pressure, the noise level is only about eighty decibel near the machines.Quick installation ensured as the machine is fabricated and tested at factory and possesses the flexibility for relocation.The equipment is available in FRP casings or stainless steel.The content material at the surface is specially engineered for the purpose of direct evaporative cooling & humidification. It is constructed from a unique cellulose paper that comes impregnated with compounds that are insoluble and prevent rotting. It also contains wetting agents and stiffening saturates. The material is made out of corrugated sheet that is assembled in pads that are self-supporting.There is an arrangement of patented angle on the sheets in order to direct the flow of water towards the side of the air inlet, the place of occurrence of maximum evaporation.The pad is also constructed to flush away the dust from the atmosphere and has a contact surface of about 440 m2/m3 between water and air The cover of water distribution is of fiber glass reinforced plastic for its anti-corrosive properties. The metal parts are of sixteen gauge steel sheet that is galvanized.The water tank is of 3 mm FRP that is of reinforced steel.

Environment plays an essential role in chicken growth and egg production rate. High temperature conditions directly affects the health and growth of chicken and its most important to keep the poultry farm with constant temperature. With these factors in mind, we have designed fogger nozzle cooling system, which sprays water evenly everywhere in the poultry farm cages, and immensely reduces temperature. Minute nozzles in the cooling system designed to spread the water constantly through the air and it avoids the floors getting wet and saves water usage. We have other means of cooling system like sprinklers, Air circulating fans and exhaust fans.

Liquid to Refrigerant Cooling System (LRCS) for RADAR Application Liquid to Refrigerant Cooling System (LRCS) for Defence and special purpose applications are designed and manufactured at MAK to cool the radar systems. A high-powered 330kW Liquid to Refrigerant Cooling System (LRCS) for defence radar application, is one of our successful achievements in cooling system development. Salient Features Sophisticated digital control system, touchscreen (MAK RDMS optional) Successfully tested from -20°C to +55°C operations. Efficient cooling with minimal power consumption Capable of maintaining precise set temperature Complied for EMI/EMC MIL STD – 461E

• Brand Name: gireesh

We are offering evaporative cooling system, gireesh are engaged in offering technologically advanced evaporative cooling system, which is manufactured from premium grade of raw material. Available in different models and sizes, our evaporative cooling units are used in diverse industries. drycool evaporative air cooling systems are specially designed for efficient cooling with low energy consumption. These evaporative cooling systems are based on highly efficient cellulose rigid media to provide high saturation efficiencies and can substitute the need of the mechanical refrigeration in several applications. They are best used in places that require a lot of fresh air movement. We, at dry cool provide a quality engineered product. features • comfort bearing: the units are engineered to cater the high demand on comfort cooling. The systems provide more cfm on the same hp. On the exterior an aluminium filter of rigid inlet wire is installed to clean the incoming air. • compact unit: the unit has a compact prefabricated design that occupies only 40% of space and volume as compared to other machines.

Industrial Air Cooling Systems We are providing a broad variety of high quality Air Cooling System. The offered system is fabricated by our trained professionals using best quality material and modern tools in conformity with set industrial standards.

industrial cooling systems, compressed air purification systems

cooling systems, Dry Cooling Tower Enquiry, FRP Square Type Cooling Tower

cooling systems, bulk material handling equipment

cooling systems, bulk material handling equipment, general fabrication

Air Cooling Systems, compressed air systems, Air Coolers

United Cooling Systems

Car Washing Pump, High Pressure Fogging System, Vehicle Washer

auto cooling system, Pumps, Textile Components

engine cooling systems, 3D Industrial Modeling