Cooling Towers Dealers in Sidco Industrial Estate, Coimbatore

The dry cooling towers are designed and selected through software providing accurate data on thermal transfer rate based on which they are manufactured. The tower designed incorporates the shell and tube designed with copper tubing and aluminium foil fins. The water losses are 0.01% since, the circuits are of the closed loop type and the towers are most space saving energy efficient once. Dry cooling towers are best suited for applications such as furnace coil water cooling, dg sets, compressors. The fans are of aluminium die cast with adjustable pitch and are individually tested for different flow rates. Dry cooling towers are all dynamically balanced. Since, the complete fan is of aluminium alloy plastic it does not corrode when used in outdoor applications.

Adiabatic Cooling Tower unit built thus on scale back the body of water air temperature to the coil. This provides the shoppers with important reductions within the price|cost of capital opportunity cost of the cooler further as reductions within the cost of power consumption. associate electronic temperature controller is employed to regulate the fluid (process water) temperature inside rigorous tolerances. This temperature controller pulses the sprays of water onto the cooling pads to relinquish solely the minimum of adiabatic cooling of the body of water air needed for any given load and close condition.All style options area unit in to produce a protracted product life.  

We are manufacturing Induced draft Cooling Tower in RCC Construction also both in Cross Flow and Counter Flow design. Since the structure of Cooling Tower is complete with RCC, the tower life will be more than timber as well as FRP. All other internal fills and Drift Eliminators are PVC TIMBER as like other Cooling Towers. Spiral Bevel Gear Boxes are used in RCC Cooling Towers. The ranges of our RCC Cooling towers are 500M3 to 3000M3 Cell. Higher capacities are available in multi cell construction.

We are involved in offering a comprehensive range of Natural Draft Cooling Towers, which doesn’t require any fan, or PVC fills for operation. These are 100% safe and works efficiently without any power or maintenance like other towers. The aerodynamic design and FRP louvers provided reduce spillage and evaporation loss. These are also equipped with hat dip galvanized structural and S.S. fasteners which ensures durability and efficiency of these tower. Our range of natural draft cooling towers can be installed with any type of cooling application. In addition the non-clog nozzles fitted in the tower are easy to clean. We offer these towers at very affordable price and even offer some spare nozzle with this tower. Features of Natural Draft Cooling Tower No requirement Fan, Motor and PVC fills. Power saving (no power consumption to induce air flow- no fan) Low maintenance FRP louvers reduces spillage and evaporation loss Hot Dip galvanized structure and S.S fasteners increase the life time and efficiency of cooling tower Can be installed for any range of cooling applications Non clog nozzles Easy to clean Environmental Friendly No Mechanical Noise Safety of operation The Natural draft cooling towersare particularly pretty as a cost-saving solution for power plants and other industrial plants requiring larger quantities of cooling water. Natural Draft cooling tower operates without fans and Fills, the large amount of electric power or else required for large cooling tower systems is not required. The mandatory cooling air is pass on through the tower by natural draft henceforth neither fan nor fan power is required for these kind of Cooling Solution. No maintenance required like other Wet (or) Dry Cooling Towers. By using of Non clock nozzle are easy to cleaning reqduce spillage and evaporation loss. Hot Dipped Galvanized Structural’s and S.S.fasteners increase the lifetime as well as the efficiency of the cooling tower it can be installed for any range of cooling application. Structure : Is made from heavy M.S.Angle/Tee/Channel sections and Hot Dipped Galvanised or lined with FRP for corrosion resistance. Louvers : Are made from Fiberglass Reinforced Plastics which ensures corrosion resistance and good mechanical properties. Water Distribution Headers : Are made from “c” class galvanised pipe. Nozzles : Are made from Rigid PVC (or) Brass Nozzle to give good corrosion resistance. Nuts and Bolts : Are made from Stainless Steel (or) HDG Bolt and Nuts. Features and Functions of Natural Draft Cooling Towers Natural Draft Cooling Tower especially hold attraction as solution for saving costs for large industrial plants and power stations; that require large amounts of cooling water. The needed cooling air is transported to the tower with the help of natural draft. Hence there is no necessity for fan or fan power. It is also used for the release of treated exhaust gas. It also implies that there is no need of gas reheating or chimney. PVC Fills, motor, fan are not required by Natural Draft Cooling Towers. FRP Louvers that are specially designed aerodynamically, minimize evaporation loss and spillage. Be Sociable, Share! Tweet

Cross flow gravity distributes the water through the nozzles uniformly across the fill material. Cross flow is a design in which the air flow is directed perpendicular to the water flow Air flow enters one or more vertical faces of the cooling tower to meet the fill material. Cross flow of air continues through the fill and thus past the water flow into an open plenum volume. Water flows through the fill by gravity. A distribution or hot water basin consisting of a deep pan with holes or nozzles in its bottom is located near the top of a cross flow tower. Advantages of the cross flow design: Water distribution allows smaller pumps and Non-pressurized spray simplifies variable flow. Lower initial and long-term cost, mostly due to pump requirements.

We are Heat Transfer Equipments Pvt Ltd established in 1989 and also have many years experienced in the fields of Cooling Tower Manufacturer. We have member with (CTI USA) Cooling Technology Institute USA. Dry Cooling Towers are commonly used in the Power Plant, it is latest model cooling tower. A lots of power plants are cooled simply by air. Dry Cooling Tower is an equipment which is used dry cooler of defensive the working fluid from ecological revelation and contamination. There is no loss of water by evaporation because No water consumption in this type of cooling tower and also, we install the dry cooling tower in a right manner. Why Dry Cooling Tower? Dry cooling tower be able to a great extent speed up the Planning approvals process. Options are ever-increasing expenditure premiums are falling. Preservation expenses a great deal reduced Legislation is able to protect water provisions to power stations in droughts Also we experience of more than 23 years in the industry of cooling tower manufacturer Dry Cooling Tower Benefits are: Very economical in cost, Conserving significant amount of water, Minimizing environmental impact. How to Design Dry Cooling Tower?   We are designing the dry cooling tower as per the client requirements and we having 23 years experienced in cooling tower industry. We have well designed and develop the timber cooling tower for various industries. Our designing department is updated and very qualified engineers with designing knowledge and designing standards by cooling tower technology (CTI Membership).   If the thermal power plant is not located on the seaside or near a huge lake and if the water is either too exclusive to use a wet cooling tower, then the only cooling preference is using a dry cooling tower. A huge of water gets conserved on using dry cooling towers and Optimized cooling tower designing and develop using latest materials and latest technology construction methods.   In Dry cooling tower, Reduced yearly operating costs and it also No decomposition caused by air and this type of cooling tower performance ensures minimum ecological impact.

• Type: FRP Round Cooling Towers
• Material: FRP
• Certification: ISO 9001:2008
• Color: Blue, Grey
• Condition: New
• Warranty: 1year
• Country of Origin: India
• Brand Name: World Cooling Towers
• Shape: Round
• Finishing: Strong Steels, Fiberglass
• After-Sales Service Provided: Yes
• Cooling Type: Evaporative Cooling
• Tower Material: FRP

Based on the cutting-edge technology, the Fanless Cooling Tower, which we offer, is manufactured as per the set industrial standards. We offer the best Fanless Cooling Tower at the market leading rates to the clients. We are a dependable Manufacturer, Supplier and Exporter of Fanless Cooling Tower. Highlights Power consumption : No fan, higher head required; equivalent total power consumption with traditional water cooling towerSilent design : No fan, motor, reducer, rotating machinery with noise lower than the ultra-low noise cooling towerCooling method : Cooling water spray kinetic ventilation without external power sourceSuspension means: No vibration, no shock absorbers neededOperating and maintenance costs : Composed of static components made of corrosion-resistant materials.No wear and tearLow maintenance charge Working Principle of Fanless cooling tower : Natural Type Cooling Towers are nothing but the water is cooled with natural atmospheric air travelling and the water is sprayed with the help of Spray nozzles and covered with louver covers. This method saves the operating cost because it has no mechanical fans. These cooling towers are called as atmospheric cooling tower or Fanless and fillless cooling tower. (Available range is from 7.5 TR to 100 TR) Splash loss and dust prevention capacity : Five-fold water blocker installed at the air vents of the tower top for liquid-water separation. In addition to dust prevention, the water splash loss is between 0.001~0.009% (as per spray pressure). Reduce more than 90% water splash loss than the traditional tower and reduce the transmission of Legionella bacteria Material of Construction Structure : Is made from lined with FRP for corrosion resistance with heavy M.S.Angle/Tee/Channel sections and hot dipped galvanised orLouvers : Are made from fibreglass reinforced plastics which ensures corrosion resistance and good mechanical properties.Water Distribution Headers : Are made from �c� class galvanised pipe.Nozzles : Are made from nylone-6 to give good corrosion resistance.Nuts& Bolts : Are made from nylone-6 & M.S. Electroplated.

Round shape cooling tower are called as Bottle shape cooling towers and induced draft counter flow cooling towers. Round shape Cooling Tower Capacities Round shape cooling tower gives 100% cooling efficiencies it’s give good appearance flow rate from 5 M³/Hr To 550 M³/Hr gives differences in temperature 4ºC To30 ºC Availability of Capacities from 5 TR T0 600 TR. Features The bottle shaped FRP cooling tower is utilized in several industries and has the following features. All the components have a modular and compact design The casing and the design has an exclusive circular design. Therefore no impact of the direction of prevailing wind is encountered. This FRP water cooling tower has a very efficient sprinkler head system that is rotative and is made of aluminum alloy Axial flow fans that are designed aerodynamically with adjustable pitch are used The bottle shaped FRP cooling tower helps conserve power Quiet operation is ensured The sump is given easy access with a galvanized mesh of hot dip. This is done to avoid entry to foreign objects into the water basin The possibility of corrosion and rust gets minimized due to the framework steel components that are galvanized hot dip Though the cooling tower maintenance is not difficult, it is important. Cooling Tower Maintenance Efficient treatment of water Prevent scale deposits Do way with or clean spray nozzles that get clogged Adequate air flow should be ensured Adequate performance of pump also should be assured Round shape Cooling Towers Spares PVC Fill : A good quality fill and is of long life too. Drift Eliminator: The carry over losses due to moisture drops. Sprinkler: Due to the even water distribution over the honey comb fills. Fan: flow type fan that is aero dynamically designed is of well balanced construction. we have availability of FRP fan and Aluminum fan

JC Timber Cooling Tower Product Range Wooden Single Flow and Double Flow induced Draft Cross Flow Direct Drive System. Reduction Gear Box Drive Suystem. Counter Flow Square / Rectangular Induced / Forced Draft Towers. Packaged Wooden Double / Single Flow Induced Draft Cross Flow. Fan-less Induced Draft Wooded Cooling Tower [ Atmospheric Natural Draft Cooling Towers]. Re-Inforced Concrete Cooling Towers. Spares For any Type and Make of Cooling Systems. Specifitaions for Timber Cooling Tower:   Temperature 4°C To 30°C 2 Cell Timber Cooling Tower 3 Cell Timber Cooling Tower 5 TR T0 1000 TR Uniform water spraying Fow Rate from 5 M3/Hr To 500 M3/Hr   Timber Cooling Tower Types are : Timber Induced Draft Cross & Counter Flow Cooling Tower   Send Your LPM, Inlet Temperature, Out let temperature, WBT to get free quote for your Timber Cooling Tower requirement. Send mail to info@jcequipments.com   Maximum Wind Velocity KMP Elevation Above sea Level M Maximum Temperature 0 C Minimum Temperature 0 C Maximum Humidity % Minimum Humidity %   Design Data   Design Water Flow Rate - M3 /hr Hot Water Inlet Temperature - 0 C Cold Water Outlet Temperature - 0 C Wet Bulb Temperature at site - 0 C   Timber Cooling Tower Useful for : Air conditioning Industries, Chemical Industries, Diesel generating Industries, Chilling plants   JC Timber Cooling Tower Design   Economy in Operation JC Timber Cooling System are designed for the highest effieiency at the lowest operating cost. Fans gear boxes, fill and drift eliminators are optimized to deliver maximum cooling with minum applied horsepower for lower operating cost.   Best Performance JC Timber Cooling System are providing more wetted surface area for uniform water distribution and higher heat trasfer rate.   Architectural Compatability JC Timber Cooling Towers are designed to a low profile. So the appearance and general configuration blends harmoniously with surroundings. Performance and attractive appearnance are demanded.   Maintenance Free JC Timber Cooling System are used maintenance free materials throught the tower. The materials are used in structural and functional components, all steel is hot-dipped galvanized after the fabrication.   Tips for Timber Cooling Tower Installation and Maintenance:   Install Timber Cooling System very near to you plant. Regular maintainence should be done regularly to avoid problems and efficiency. Monitor the wooden quality for every 3 months one.   Types and Methods of Timber Cooling Tower:   Conventional Method of Timber Cooling System [Natural Draft Timber / Fanless Filless Timber] Mechanical Type of Timber Cooling Tower [ Induced Draft Counter Flow Timber Cooling tower and Induced Draft Cross Flow Timber]   Natural cooling System reduce the operational costs due to not having mechanical fans. The water is cooled with natural atmospheric air traveling and the water is sprayed with the help of Spray nozzles and covered with louver covers. So this methods are called as atmospheric cooling tower or Fanless timber and fillless timber cooling tower.   JC Timber Cooling Tower are Energy saving fanless Cooling Towers in India.   The cross flow will have mechanical Fan and the water will be cooled with help of mechanical Fan. JC Mechanical timber cooling towers provides good thermal performance and low drift loss. JC Equipments prefer the seasoned chemically treated, lightwood used to manufacture the timber Cooling Towers. Also we use this same wood for Splash bars, Drift Eliminator, Fan duct for our JC Timber Cooling Tower.   Applications for Timber Cooling Tower. Automobile Industries, Cable Industries, Casting Units, Cement factory, Chemical Industires, Dairy Industries, Fertilizers Indusries, Food Industries, Hotels , Hospitals, Paper Industries, Power Generation Stations, Petrochemical Industries, Pharmaceutical units, Plastic Industries, Refineries, Rubber Industries, Steel Plant & Rolling Plant, Sugar Mills, Textile Mills, Spinning Mills, Tyre Manufacturing units Water effluent treatment industries

Wooden Single Flow and Double Flow induced Draft Cross Flow Direct Drive System. Reduction Gear Box Drive Suystem. Counter Flow Square / Rectangular Induced / Forced Draft Towers. Packaged Wooden Double / Single Flow Induced Draft Cross Flow. Fan-less Induced Draft Wooded Cooling Tower [ Atmospheric Natural Draft Cooling Towers]. Re-Inforced Concrete Cooling Towers. Spares For any Type and Make of Cooling Systems. Specifitaions for Timber Cooling Tower:   Temperature 4°C To 30°C 2 Cell Timber Cooling Tower 3 Cell Timber Cooling Tower 5 TR T0 1000 TR Uniform water spraying Fow Rate from 5 M3/Hr To 500 M3/Hr   Timber Cooling Tower Types are : Timber Induced Draft Cross & Counter Flow Cooling Tower   Send Your LPM, Inlet Temperature, Out let temperature, WBT to get free quote for your Timber Cooling Tower requirement. Send mail to jc@thecoolingtowers.com   Maximum Wind Velocity KMP Elevation Above sea Level M Maximum Temperature 0 C Minimum Temperature 0 C Maximum Humidity % Minimum Humidity %   Design Data   Design Water Flow Rate - M3 /hr Hot Water Inlet Temperature - 0 C Cold Water Outlet Temperature - 0 C Wet Bulb Temperature at site - 0 C   Timber Cooling Tower Useful for : Air conditioning Industries, Chemical Industries, Diesel generating Industries, Chilling plants   JC Timber Cooling Tower Design   Economy in Operation JC Timber Cooling System are designed for the highest effieiency at the lowest operating cost. Fans gear boxes, fill and drift eliminators are optimized to deliver maximum cooling with minum applied horsepower for lower operating cost.   Best Performance JC Timber Cooling System are providing more wetted surface area for uniform water distribution and higher heat trasfer rate.   Architectural Compatability JC Timber Cooling Towers are designed to a low profile. So the appearance and general configuration blends harmoniously with surroundings. Performance and attractive appearnance are demanded.   Maintenance Free JC Timber Cooling System are used maintenance free materials throught the tower. The materials are used in structural and functional components, all steel is hot-dipped galvanized after the fabrication.   Tips for Timber Cooling Tower Installation and Maintenance:   Install Timber Cooling System very near to you plant. Regular maintainence should be done regularly to avoid problems and efficiency. Monitor the wooden quality for every 3 months one.   Types and Methods of Timber Cooling Tower:   Conventional Method of Timber Cooling System [Natural Draft Timber / Fanless Filless Timber] Mechanical Type of Timber Cooling Tower [ Induced Draft Counter Flow Timber Cooling tower and Induced Draft Cross Flow Timber]   Natural cooling System reduce the operational costs due to not having mechanical fans. The water is cooled with natural atmospheric air traveling and the water is sprayed with the help of Spray nozzles and covered with louver covers. So this methods are called as atmospheric cooling tower or Fanless timber and fillless timber cooling tower.   JC Timber Cooling Tower are Energy saving fanless Cooling Towers in India.   The cross flow will have mechanical Fan and the water will be cooled with help of mechanical Fan. JC Mechanical timber cooling towers provides good thermal performance and low drift loss. JC Equipments prefer the seasoned chemically treated, lightwood used to manufacture the timber Cooling Towers. Also we use this same wood for Splash bars, Drift Eliminator, Fan duct for our JC Timber Cooling Tower.   Applications for Timber Cooling Tower. Automobile Industries, Cable Industries, Casting Units, Cement factory, Chemical Industires, Dairy Industries, Fertilizers Indusries, Food Industries, Hotels , Hospitals, Paper Industries, Power Generation Stations, Petrochemical Industries, Pharmaceutical units, Plastic Industries, Refineries, Rubber Industries, Steel Plant & Rolling Plant, Sugar Mills, Textile Mills, Spinning Mills, Tyre Manufacturing units Water effluent treatment industries How to Design Timber Cooling Tower?   JC Equipments are designing the timber cooling tower as per the client requirements and we having 23 years experienced in cooling tower industry. We have well designed and develop the timber cooling tower for various industries. Our designing teams are very qualified with designing knowledge. We are most designed to thermal plants and also a many power plants are cooled simply by air using this type cooling tower. The following types are available here, Induced Draft Cross and Counter Flow cooling tower. The system is designed for the highest efficiency.  

• Brand Name: gireesh

We are offering cross flow cooling tower, gireesh cross flow cooling towers are designed & manufactured to deliver utmost space and energy efficiency. There is no need of maintenance for the rotary sprinklers or tiny nozzles. One can easily clean the distribution basin and nozzles even when the tower is operating thus, saving pump power. The fan, motor and water distribution system is easily maintained. Technical functions of the products are as follows: • the tower draws the air through the side and the upwards moving hot water gets collected in the frp basin fitted on the top and the air passes through the target nozzles and sprinkles over the pvc fills. Applications • aluminium die casting mc • air compressors • ac plant & chilling plants • plastic injection moulding mc and blow moulding mc • chemical industries • dairy, and food processing industries • distilleries and breweries plants • genets & megawatt projects • glass mfg. Plant • herbal, aromatics & extraction plants • industries heat process • oil refineries • pvc pipes mfg.plant • soap cosmetic mfg. Industries • steel factory and foundry.

• Applications: Automobile Industries, , Cable Industries, and Casting Units,

We Design and Manufacture a comprehensive Seamless Cooling Tower here in India, our designing peoples concentrate much more to develop these kind of Seamless Cooling Systems as per our buyers requirement that have a single piece shell.  There are no seems, panels, rivets or plenty of fasteners in this Seamless Cooling Towers and with no compromise of Quality, Competitive price and Elegant look. Contact us for more information on our Seamless Cooling Systems.

• Type: Wooden Cooling Towers
• Material: Wooden
• Certification: ISO 9001:2008,
• Application: Process Cooling,Air Compressors
• Condition: New

Wooden Cooling Tower design incorporates accommodation of waters with very high TDS factors the hot water. Find Here Wooden Cooling Towers dealers in Coimbatore. https://www.welltechcoolingsystems.in/wooden-cooling-tower/

Frp cooling towers offered by heat transfer equipments private limited are known for superior design and technology. The cooling towers are designed to meet the high standard of performance demanded by engineers. These frp induced draft cooling towers deliver compact, heavy duty and efficient cooling function and have an aesthetic design. Owing to its compactness, these frp induced cooling towers are extensively used in many process industries and in hvac applications. frp cooling tower metallic parts fully galvanized/power coated/epoxy coated. Completely corrosion resistant. Direct driven axial fan to avoided belt and gear drives. the company also manufactures frp cooling tower which is used as drift cooling tower. These products are used for reducing carry out losses of moisture drops in the air stream. And this is done through well designed multi rotary drift eliminator which is created using frp sheets.

We are offering FRP Round Cooling Tower to our client.We avalable small size to bigger size of the industrial FRP Cooling tower induced draft. Our Product range from 10 TR ,15 TR , 20 TR, 25 TR ,30 TR , 50 TR ,80 TR , 100 TR, 150 TR, 200 TR, 250 TR, 300 TR, 350 TR, 400 TR, 500 TR ,800 TR, 1000 TR .We have experienced FRP molders .So FRP has been strong bonding of fibre matrix with Resin matrix.  Its easily remove the heat from the process. Heat dissipation easily will be conducting.All the steel material to be GALVANIZED for anti corrosion purpose.We have experienced FRP COOLING TOWER ERECTION TEAM . So easily erection and commissioning for avoiding extra days for run the process.We monitoring periodically maintenance and asking performance to supplied FRP cooling tower .

• Brand Name: JC Brand

dear sirmadam, greetings for the day… we jc equipments pvt ltd take pleasure to introduce ourselves as one of the leading designers, manufacturers & exporting of all kind of cooling towers,heat exchangers, Frp Seemless Cooling Tower, pressure vessels columns, storage tanks, air cooled condensers, etc... in india. jc equipments pvt ltd started in the year of 1989. we have wide knowledge in this field and we have regular customers throughout the world. we are authorized manufacturers of asme and we have “u, s & r” stamp certification also. we are corporate member of cti, usa. we are a world class manufacturers and we never compromise in quality. we assure our product will be best quality and competitive price. herewith we have enclosed the product profile for your kind reference. kindly refer the attachment. looking forward your valuable enquiry for us to quote our best and competitive offers, with assuring you of our best quality and prompt service at all times.

Cooling tower is one type of heat transfer equipment. Process Water is cooled by ambient air by direct contact in wet cooling tower and indirect contact in dry cooling tower. We offer following in house design and fabricated cooling towers. Wet Cooling towers FRP cooling towers Timber Wooden cooling tower RCC cooling tower Dry cooling towers

• Material: FRP
• Features: Spray type cooling, Well developed, Best material used, Easy to install

Rcc Cooling Tower, Plate Type Heat Exchanger, Natural Draft Cooling Tower

Cooling Towers, Heat Exchangers, industrial oil coolers, Oil Coolers

Cooling Tower, Cooling Tower Fans, Cooling Tower Motors

Dry Cooling Tower, Cooling Towers, Heatless Air Dryer, fined heat exchangers

Cooling tower is one type of heat transfer equipment. Process water is cooled by ambient air by direct contact in wet cooling tower and indirect contact in dry cooling tower. We offer following in house design and fabricated cooling towers.

Cooling Towers, Air Cooled Condensers, Air Cooled Heat Exchanger

Portable Cooling Tower, engine oil cooler, Wire Wound Oil Cooler

Forced Draft Cooling Tower, Wooden Cooling Tower, Honeycomb Pvc Fills

Cooling Tower, aluminium fans, aluminium sprinklers, fibre cooling tower

Cooling Tower, Heat Exchanger and Fiberglass Tank