Cooling Towers Dealers in Coimbatore

• Material: Metal
• Condition: New
• Warranty: 1 Year
• Usage: Industrial
• Section: 100mm x 100mm to 250mm x 250mm
• Size: 2 inch
• Industries: Pharmaceutical, Refineries Etc., Power Plants, Oil And Gas

• Material: Wooden
• Certification: CE Certified
• Application: Dry Cooling
• Weight: 100-200kg
• Voltage: 110V
• Capacity: 1000-1500L
• Brand Name: JE

Dry Cooling Towers are produced in forced drought and induced drought designs, and in Single and Multi-Fan Arrangements, Depending on customer specifications and requirements, We are the professional dry Cooling Tower and Air Cooled Condenser Manufacturers, Tubes in Copper and Fins are Aluminium MOC we use 5/8'' or 3/8'' OD copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.Advantages : A great deal of water gets preserved on using dry Cooling Towers. Less or no preparation needed as atmospheric air is in abundance No formation of scale or heat exchanger cleaning is required There are no mobile parts except for the fan and the motors. Hence the Cooling Tower maintenance is negligible. Dust, fly ash, living organisms or dirt do not get mixed up with process water There are no constraints placed on the location of plant No corrosion caused by air This Cooling Tower performance ensures minimal environmental impact Reduced annual operating expenses Applications :Predominantly used for air compressor and power generating units for applications of engine water cooling. Petroleum plant, power utility, steel manufacturing industry, cement, sugar factories , chemical and gas-processing industrials.

• Brand Name: FRP
• Voltage: based on customer
• Condition: based on customer
• Warranty: 36 months from date of manufacture
• Place of Origin: Coimbatore
• After-sales Service Provided: yes

We offer natural draft cooling tower. Our natural draft cooling tower not required any fan are fills, no maintenance like other cooling towers, non clock nozzle are easy to cleaning reduce spillage and evaporation loss. Hat dip galvanized structural and s.s fasteners increase the lifetime as well as the efficiency of the cooling tower it can be installed for any range of cooling application. Cooling tower capacities: natural draft cooling tower availability of capacities from 5 tr t0 1000 tr in single cell features and functions natural draft cooling tower especially hold attraction as solution for saving costs for large industrial plants and power stations; that require large amounts of cooling water. the needed cooling air is transported to the tower with the help of natural draft. Hence there is no necessity for fan or fan power it is also used for the release of treated exhaust gas. It also implies that there is no need of gas reheating or chimney. the rates of flow come around 200,000mh per 9, 00,000gpm pvc fills are not required by these frp cooling towers frp louvers that are specially designed aerodynamically, minimize evaporation loss and spillage the effusion and lifetime of this industrial cooling tower is increased with the aid of fastener. these industrial cooling towers are highly economical for depreciation and loads of high cooling over an extended period the recirculation of tepid air causes reduced performance. This gets reduced by the high distance between the air outlet and inlet of the tower.

The FRP Square Cooling Tower, which we offer, is manufactured as per the set industrial standards. Also, we undertake repairing and revamping services of any type of FRP Square Cooling Tower. We offer these FRP Square Cooling Towers at competitive rates to the clients. Highlights Operates on the induced draft counter flow principle operationThe fan creates air movement vertically pulled upwards on tower across the fills in opposition to the water flowHot circulating water enters the water inlet headers and sprays through non clogging PP spray nozzleEven Water distribution Well-designed PVC Drift Eliminators are fitted Reduces Drift LossesHas an Inspection Door Allows easy access for inspection and maintenanceSquare tower can be installed in multi cell also Cooling Tower Capacity : Ranging from 5TR to 600 TR in Single cell and as per requirements of client in multi-cells. Benefits Compact design, corrosion resistant and lightweightDurable service LifeMaintenance freeHigher efficiencyMinimum drift loss of waterNo contamination, due to dust or foreign particlesPiping cost negligible and suitable for small unit Assembly FRP Casing : Cooling Tower Casing is made of selected grade materials of tough Fiber Glass Reinforced Polyster and resins etc. An additional embossing is provided for extra strength of large Cooling Towers.Header Pipes : The header pipe designed for proper distribution of water over the FILLS so that proper contact time for air to water is achieved. The header pipe is manufactured in G.I., P.P. with FRP moulded construction which makes it Non Corrosive Type & Long Lasting.Water Distribution Nozzle : We are offering low pressure drop, non-clogging, ABS make solid cone type nozzle for distributing the water on the fill pack area. Each nozzle is designed to operate on a water fluctuating load as good as 20%. Each nozzle can cater the service area of 1.2m x 1.2m at an inlet pressure of 0.3 kg. Per cm.sq.Drift Eliminator : CCS Drift eliminators, to reduce carry over losses through of moistures drop in the air stream. The individual drift eliminators of s-shaped corrugated sheets are bonded with subsequent layer to creat the structure.PVC Honeycomb Fills : PVC Honeycomb type fills having extended contact area. Splits incoming air and water into several streams spread evenly across the water cross section increasing heat transfer rate easy to replace.

• Brand Name: vrf

We VRF are the number one company for exporting and supplying of Cooling Tower to our clients. It We VRF are the number one company for exporting and supplying of Cooling Tower to our clients. It

• Type: Modular Cooling towers
• Material: Fiberglass Reinforced Plastic (FRP)
• Certification: ISO 9001:2008
• Application: Heat Exchanger
• Color: Blue, Grey
• Condition: New
• Power: 3-6kw
• Driven Type: Hydraulic
• Warranty: 1year
• Country of Origin: India
• Brand Name: World Cooling Towers
• Feature: Modularity, Energy Efficiency, Compact Design, Ease Installation $ Maintenance, Corrosion Resistance
• Cooling Type: Evaporative Cooling, Dry Cooling, Hybrid Cooling

We are one of the widely acclaimed manufacturers and suppliers of Cooling Towers. The offered cooling tower is a versatile heat rejection device, which is used to reject the waste heat to the atmosphere. Our supplied cooling tower employs fresh air for cooling the atmosphere and environment. The offered cooling tower is available at very cost effective and affordable market rates.                  

• Country of Origin: India
• Material: FRP
• Certification: ISI Certified
• Application: Industrial
• Color: Blue
• Capacity: 100TR
• Warranty: 1 Year
• Surface Treatment: Polished
• Design: Cross Flow
• Phase: Three Phase

Our efficient Cooling Towers work by transferring processed waste heat in the atmosphere and cooling down the products. We are counted amongst the chief Manufacturers, Exporters, and Suppliers of Cooling Towers in India. The Cooling Towers are provided at the most competitive prices by us. Used In Building coolingOil refineriesPower stationsChemical plants Attributes Excellent performanceEasy installationLow power consumptionCost effective

FRP Cooling Tower is used for all types of industries to cool the recycle water flow. Round Shape will give very good appearance and 100% cooling efficiency. The rotary sprinkler gives uniform water flow over the wet deck Fills and gives maximum of cooling efficiency. Cooling Towers of capacity 10TR to 1000TR with salient features like Low noise, Compact Design and Light weight. All MS supports are Hot Dip Galvanized duly opoxy coated. Axial flow fan dynamically balanced with motor body epoxy coated. Totally corrosion resistant construction.

We offer induced draft cooling tower. These induced draft cooling tower are three phase 380-480 v high voltage controlled, this product is known for their sturdy built and compact design. It is a cross-flow type cooling tower procured of highly durable galvanized stainless steel and are fit for high thermal applications.

We are enlisted as one amongst the forefront Natural Draft Cooling Towers Manufacturers in India. Catering to the specific requirements of the national as well as international clients, the company has acquired noteworthy position amidst the prime FRP Natural Draft Towers Exporters. The Natural Draft Towers, offered by us, do not require fan and PVC fills but ensures easy operation, high productivity and low maintenance cost. Moreover, the hot dip galvanized structural and S.S. fasteners also ensure high durability and resistance to adverse conditions.

Types of Closed Circuit Cooling Tower   Combined Flow Counter Flow   We may well include various percent of the cooling water from the available water resources to the closed circuit cooling system and we be able to decrease the cooling tower size.   Mixing ration means the percentage of the added water. If our mixing ratio is zero, it is called absolutely closed system. When the mixing ratio is 100%, it is called an open system.   Closed Circuit Cooling Tower Water Temperature   Closed Circuit Cooling Towers are accomplished of incoming fluid temperatures as high as 180ºF (82.2ºC),.   Closed Circuit Cooling Tower Design   Our Closed Circuit Cooling System gives completely rated thermal presentation, which also by yourself verified over special types of flow and high temperature requirements. Closed Circuit Cooling Towers are high effciency and water saving.

• Brand Name: gireesh

We are offering forced draft cooling towers, gireesh are an accredited manufacturer and supplier of high quality forced draught cooling towers that are widely used in various industries. These cooling towers are manufactured using quality-approved factor inputs, which we source from the authentic vendors of the industry. Our offered range is available in various specifications in order to meet the varied needs of the clients. features: • rigid construction • corrosion resistance • longer service life features • forced draught fan handles cold and dry air with less specific volume, and hence, air flow quantity is lesser for a given duty than induced draught • also, we use world renowned high efficiency fills, which has lesser static resistance than any other type of fill • finally, the velocity pressure which gets wasted into the atmosphere in induced draught is utilized effectively in the forced draught system that we offer, contributing to savings in power • the exit air velocity is less in a forced draught cooling tower, therefore, the carry over loss gets minimized • coupled with this, very high efficiency drift eliminators reduce the total drift loss to max. 0.05% compared with 0.2-0.3% for other systems • this also eliminates the drift nuisance as well as algae formation.

We are involved in offering a comprehensive range of Natural Draft Cooling Towers, which doesn't require any fan, or PVC fills for operation. These are 100% safe and works efficiently without any power or maintenance like other towers. TNatural Draft Cooling Tower is designed in latest technology environment so that it can meet present scenario as well as customers requirement at cost effective price. These natural draft cooling tower is also known as Spray type cooling tower. These natural draft cooling towers are in great demand considering its longevity and the savings. We are here to cater our clients with optimum quality Natural Draft Type Cooling Towers that are scientifically designed and have sturdy construction. Easy to maintain and highly durable, these cooling towers require minimum maintenance and offer high performance.

• Features: High quality, Less maintenance, Longer functional life.
• Application: Water Cooling
• Tower Design: Closed Loop
• Tower Type: Induced Draft
• Capacity: 40 TR
• Tower Type: Induced Draft
• Shape: Round
• Fan Diameter: 850 mm
• Supply Phase: Three Phase
• Cooling Capacity: 400 lpm
• Brand: AirWa
• Tower Material: FRP

We are JC Equipments Pvt Ltd established in 1989 and also JC Equipments have 23 years experienced in the fields of Cooling Tower Manufacturer. We have member with (CTI USA) Cooling Technology Institute USA. Dry Cooling Towers are commonly used in the Power Plant, it is latest model cooling tower. A lots of power plants are cooled simply by air. Dry Cooling Tower is an equipment which is used dry cooler of defensive the working fluid from ecological revelation and contamination. There is no loss of water by evaporation because No water consumption in this type of cooling tower and also, we install the dry cooling tower in a right manner.

FRP Square type Cooling Towers operates on the induced draft counter flow principle operation. The fan creates air movement vertically pulled upwards on tower across the fills in opposition to the water flow. Hot circulating water enters the water inlet headers and sprays through non clogging PP spray nozzle. Water distribution is even. Well designed PVC Drift Eliminators are fitted to reduce Drift Losses. Square Fiber Glass Cooling Towers are provided with Inspection door for easy access for inspection and maintenance. Features • Defect free• Easy to operate• Reliable Price Range: Rs 20000 - 2000000

The evaporate cooling towers essentially combines a cooling tower and a condenser coil in single equipment. It eliminates the sensible heat transfer step of the condenser coil water which is required in the cooling towercondenser system. This permits a condensing temperature substantially closer to design wet-bulb temperature, and consequently, minimum heat process energy input. The closed circuit cooling tower was being tested at our factory with real heat load, with required water flow and was exported to Iraq after confirming the performance. The fan system sucks air through the falling water and over the coil surface. A small quantity of the water is evaporated, removing heat from the primary circuit and cooling it inside the coil. Therefore, like the cooling tower, all of the heat rejection is by evaporation, thus saving about 95% of the water normally required by a "once-through" system..!!

Buyers can avail from us Square Shape Cooling Tower that comes in different capacities. The Square Shape Cooling Tower is of the design: vertical induced draft counter flow, with a uniform distribution of water and an optimal transfer of heat. Square Shape Cooling Towers are nothing but heat rejection devices that are used to remove unwanted heat into the air from the cooling stream of water to a reduced temperature. Square Shape Cooling Towers are utilized by all large industries in order to cool the water that has undergone recycling. The installation of Square Shape Cooling Tower can be done independent of the direction of wind. Square Cooling Tower Capacities Square Cooling tower gives 100% cooling efficiencies and it gives good appearance, flow rate from 5 M3/Hr to 11000 M3/Hr gives differences in temperature 4oC to 30oC Availability of capacities from 5 TR to 1000 TR in single cell Technical Features Of Square Cooling Tower The flow of water ranges between 5 M3/Hr to 11000 M3/HrThe design easily blends with the architectural environsThe casing of the same is of tough Fiber Glass Reinforced Plastic (FRP). It possesses sufficient structural power to endure winds of high velocities as well as vibrations. Besides Gel coat, an ultra violet stabilized resin is also used for extended life. The square cooling tower is resistant against local impacts and local repairs could be easily done in case of occurrence of slight damages.A temperature difference from 4oC to 30oC can be ensuredIt uses less energy on the whole due to minimal resistance of air to waterNozzles are designed easy cleaning while running the square shape cooling towers Applications Of Square Cooling Tower In cold rooms and air condition plantsAluminum die castingDairy industryChemical industriesIn food industries such as hotels as well as in industries of food processingOil refineriesAutomobile industriesForging and mechanical industriesPlants manufacturing glassAlso employed for mega watt project industries' heat processBy plastic molding machineries

Natural Type Cooling Towers are nothing but the water is cooled with natural atmospheric air traveling and the water is sprayed with the help of Spray nozzles and covered with louver covers. This method saves the operating cost because it has no mechanical fans. This cooling towers are called as atmospheric cooling tower or Fanless and fillless cooling tower. The main advantage of Fanless cooling towers are energy saving through fanless system.

We are engaged in manufacturing and exporting highly efficient wooden cooling tower. These towers are offered with 91 models available under single cell configuration. The uses of multi-cell configuration help in the flexibility of operation and meet better cooling requirements. These cooling towers are supplied with treated timber construction, which is pressure treated with copper chromate arsenic. Structural design for operational load and wind pressure of 30 psi is taken into consideration. Specifications: item : material of construction structure : treated timber fill : treated timber pvc fill support : grp grids ss grids drift eliminator : treated timber 2 pass pvc drift eliminator : support marine plywood pp structural connector : frp rings nozzle : polypropylene (pp) hardware's : hdg.msss nails : screw shank ss fan assembly : cast aluminum alloy grp bladed fan cylinder : frp gearbox : wormspiral bevel drive shaft : floating hdg.ms casing & louvers : corrugated ac sheetcorrugated frp sheet electric motor : to suit country specific cold water basin : rcc (by purchase ser-drawing provided)

We are leading Manufacturers of the RCC Cooling Tower in India. Our Range of RCC Coling Tower Capacity 200CuM/hr. to 3500 CuM/hr. per cell. Lofty efficiency gear boxes, axial flow fans and drive shafts.

• cooling tower: chiller
• air dryers: dry type cooling towers

We are the manufacturers of cooling towers for industries . we manufacturing all kind of cooling towers like FRP ,Coil,wct cooling tower. FRP Cooling towers is From 10 TR to 2000 TR. Dry Cooling towers from 150 to 2000 KVA Diesel Generators . Gem Aqua Saver is from 250 Kw to 4000kw for furnace application

We at Unitek Hydraulics offer cooling towers and heat exchangers for industrial processes. The cooling towers are designed to cool industrial recycled process water from 50 degrees to a lower temperature. The inlet water pressure rotates the sprinkler to disperse water uniformly over the media. Once the air passes through the fill media, portion of the water is evaporated and removes heat from the remaining water. Cold water is then collected at the sump and is recirculated at the source. It finds application in many industries such as air compressor, AC plant, diesel and steel factories. We also offer a wide range of heat exchangers that are used to change the status of materials from liquid to gas and from gas to liquid. We cater to a gamut of industries such as chemical, pharmaceutical, paint and coating, power plants, biotech industries and petroleum industries. Our machines are recognised for their sturdy construction and optimum performance.   Features Uniformity in water dispersion through rotary sprinkler Sturdy construction Low power consumption Optimum performance Robust

Frp cooling towers offered by heat transfer equipments private limited are known for superior design and technology. The cooling towers are designed to meet the high standard of performance demanded by engineers. These frp induced draft cooling towers deliver compact, heavy duty and efficient cooling function and have an aesthetic design. Owing to its compactness, these frp induced cooling towers are extensively used in many process industries and in hvac applications. frp cooling tower metallic parts fully galvanized/power coated/epoxy coated. Completely corrosion resistant. Direct driven axial fan to avoided belt and gear drives. the company also manufactures frp cooling tower which is used as drift cooling tower. These products are used for reducing carry out losses of moisture drops in the air stream. And this is done through well designed multi rotary drift eliminator which is created using frp sheets.

Dry cooling tower / Coil Cooling Tower is an equipment which is used to cool and maintain the temperature of process hot water at a particular level. This operates on the principle of heat transfer by a heat exchanger with extended fins. The fan is deiven by an Electric Motor. Applying dry cooling means saving water. Dry cooling technologies prove technical qualities and effectiveness in power plant heat rejection. Dry Cooling Towers functioning in combination of extended sine wave finned surface heat transfer coils, with axial flow fans and rigid construction for regular operation. The hot water from any equipment can be sent to the inlet of the Dry Cooling Tower & that hot water get Cooled and Cold water outlet from the Dry / Coil is connected to the pump, which pumps the cold water to the equipment to transfer the heat from the equipment with less Evaporation loss, Maintenance free, No need of raw Water tank & 100% free from descaling. Dry cooling benefits are:  Conserving significant amount of water. Minimizing environmental impact. Very economical in cost. Dry cooling Applications are:  Power Plant Cooling Solution Injection Moulding Chemical & Oil Refineries Plastic Extruder Plant Steel Foundry & Forgings Dairy & Dyeing Plants Water Treatment Plants Diesel / Gas Genset Plants Necessity of Air /Dry / Coil Cooling Tower Water is the most essential element of our life, About 97 percent of that is stored in ocean. Of the remaining 3%, 2% are frozen ermanently as ice. What is left is what we have to work with. And this precious and meager amount needs a lot of attention to perform its function properly in the machines of civilization. Water plays a great role in industries. It is used as a coolant in various machineries. In water cooling towers like FRP Tower or Timber Tower, huge loss of water due to drift, evaporation, spray loss and blow down. It is now abundantly clear that water charges will go on rising at well beyond inflation rates. So for that we are introducing the Dry Cooling Tower / Coil Cooling tower for save the water. 1 Special Features of Air / Dry / Coil Cooling Tower 1.1 Usage :  The Air / Dry / Coil Cooling Tower are very compact and aerodynamically designed for Diesel Engines and LT & HT Circuits. 1.2 Very Less Water Conceptions: The Air / Dry / Coil Cooling Tower are air cooled equipment so just you fill very small quantity of water, after that it is not required additional water. Due to the closed circuit there is no evaporation loss. So our towers are save the water cent percent. 1.3 Filling Water : You can fill any typeor quality of water. No need of water softening plant or treatment chemicals. In first time just you fill small quantity of common drinking water. 1.4 No Scale formation Due to closed circuit, same water will be circulated continually and no chance for evaporation so that scale will not be separate from the water and it is not deposit at any where in the heat transfer area. 1.5 Desiging: Our Towers are very compact and aerodynamically designed. There is no any restriction for the location of the plant; atmospheric air is the cooling media. It cools the hot water and maintains the temperature of process hot water at a particular level. It has designed for highest ambient temperature so we could run the engine in 100% load even in peak summer. It has the fan and eectric motor to the water. 1.6 Energy Economy: Our Towers are specially designed aerodynamically for power saving we are provide the mostat controls to switch off the fan motors in the time of cold ambient temperature. 1.7 Maintenance :  Our Dry Cooling Towers are closed circuit. So no chance to mix dust, fly, living organisms and dirt with process water. Air is the cooling media so there is no corrosion problem. 2. Technical Specifications of Dry / Coil / Air Cooling Tower 2.1 Designing and Material Quality The Dry / Coil Cooling Tower are having heat transfer area with good quality coppers and very high quality of aluminium fins. Copper tubes are mechanically expended with coolers, it provides smooth inner tube surface so there is no chance for pressure drop (our Cooler are tested at 350 PSI). Coolers are favricated in heavy channels and using steel sheets. The finalized steel frame provides stacking and shipping support and production against tube damaging. 2.2 High performance of Fan and Motors: A new generation start of the art cooling fans the energy economy concept. It combination of performance strength endurance and reliability designed aerodynamically for characteristic of the fan outlet essences an optimum distribution of air across the ” Cooler” giving an added benefit to the system fans are dynamically balanced on computerized machine. And using IP55 / TEFC standard motors. Comparison chart between Dry Cooling Tower / Coil and Water Cooling Tower Dry / Coil Cooling Tower Plant location restriction is not required Scale for mations are impossible Water consumption is not required No corrosions due to air Mixing of dust, dirt is not possible when processing of water Except fan and motors maintenance is negligible Water Cooling Tower Water Source decides the location opf large plantsr Scale formation is unavoidable Huge loss of water due to evaporation, drift loss Steel parts in contact with water are corroded Water exposed to dust and dirt will be contaminated Maintenance is required  Note: The motor HP may be changed due to the ambient temperature of Air Cooling media and temperature of the water. Primary circuit inlet water temperature 80 C outlet water temperature 70 C. In secondary circuit inlet water temperature 66 C outlet water temperature 56 C. Other applications and models please contact jc@thecoolingtowers.com Dry Cooling Tower Advantages Eliminates Scale-formation Eliminates Contamination of air Eliminates Frequent maintenance Eliminates FRP Cooling Tower Eliminates make up water after the first fill Eliminates raw water Tank and Pumps. Eliminates Moving parts except fan & motor Eliminates Mixing of dust / dirt / fly ash with Water Eliminates PHE at Furnace & Coil circuit Eliminates de scaling, fungus cleaning Chemicals Eliminates water softening plant & chemicals Eliminates Heat exchanger headaches at primary circuit Eliminates maintenance cost, reduces power cost & saves earth

• Capacity: 10 – 1000 TR
• Inlet Air Pressure: 2 - 3 Bar g
• Inlet Air Temperature: 10 – 60 Deg C
• Outlet Water Temperature: WBT +4 Deg C

A cooling tower is a heat rejection device, which extracts waste heat to the atmosphere though the cooling of a water stream to a lower temperature. The type of heat rejection in a cooling tower is termed "evaporative" in that it allows a small portion of the water being cooled to evaporate into a moving air stream to provide significant cooling to the rest of that water stream. The heat from the water stream transferred to the air stream raises the air's temperature and its relative humidity to 100%, and this air is discharged to the atmosphere. The generic term "cooling tower" is used to describe both direct (open circuit) and indirect (closed circuit) heat rejection equipment. While most think of a "cooling tower" as an open direct contact heat rejection device, the indirect cooling tower, sometimes referred to as a "closed circuit cooling tower" is nonetheless also a cooling tower.   PRODUCT FEATURES → TEFC IP55 Extended Shaft CT Motors, → Dynamic Balanced Axial Flow Fan, → Honey Comb Design PVC Fills, → Automatic Rotary Sprinkler, Spray Nozzles, → Anti Corrosivs Fasteners, → HDG MS Structure, → UV Resin FRP Casing, 

• Brand Name: JC Brand

Dear SirMadam, Greetings for the day… We JC Equipments Pvt Ltd take Pleasure to Introduce Ourselves as one of the leading Designers, Manufacturers & Exporting of all kind of Cooling Towers,Heat Exchangers Pressure Vessels Columns, Storage Tanks, Air Cooled Condensers, etc... in India. JC Equipments Pvt Ltd started in the Year of 1989. We have wide knowledge in this field and we have Regular customers throughout the world. We are AUTHORIZED MANUFACTURERS OF ASME and we have “U, S & R” Stamp Certification also. We are CORPORATE MEMBER OF CTI, USA. We are a WORLD CLASS MANUFACTURERS and we never compromise in Quality. We assure Our Product will be best quality and competitive price. Herewith we have enclosed the product profile for your kind reference. Kindly refer the attachment. Looking forward your valuable enquiry for us to quote our best and competitive offers, with assuring you of our best quality and prompt service at all times.