Cross Flow Cooling Tower Dealers in Coimbatore

• Type: Cross Flow
• Fabrication: Field-Assembled
• Air Flow: Cross Type
• Water Flow: 400 - 4
• Industries: Refineries, Large-Scale Hvacsystems., Pharmaceutical
• FEATURES: All structural in HDG Steel
• Capacities: 10TR to 1500TR

• Certification: CE Certified
• Application: Air Cooling
• Weight: 0-100kg
• Voltage: 110V
• Condition: New
• Brand Name: JE
• Frame: The supporting structures are of hot-dip galvanized steel, used to reduce corrosion or rusting, thus ensuring extended life

The Rectangular Cooling Towers or the closed type Cooling Towers or the cross flow Cooling Towers has a range of cooling capacity of a single cell Cooling Tower of around 70M3/Hr to 300 M3/Hr. The suitable refrigeration is between 4째 C and 30째C. Multiple cells may be fixed together. This installation plants are available when your cooling requirements exceed The motors in this Cooling Tower system are present outside the tower. This setup is devoid of the problem of hot mist. When compared to the section of motor inside fan, it is very easy to remove and thus repair.   CasingThe casing of this industrial Cooling Tower is made of FRP (Fiberglass Reinforced Plastic). It is of light weight, simple to assemble and there is no need to paint. This reduces the cost of the Cooling Tower maintenance.Advantages Lower maintenance and longer service life. Available with PVC fills or treated wood fills In virtually unlimited capacity He furnishing of the inspection doors of the tower are done in such a way to provide easy access to the inside for maintenance, inspection, float valve adjustment, sump flushing out and lift-out strainer cleaning. FRP fan specially designed for higher efficiency.

• Type: Cross Flow Cooling Tower
• Material: FRP
• Certification: ISO 9001:2008
• Application: Air Cooling
• Color: Blue, Grey
• Voltage: 220V
• Condition: New
• Capacity: 1000 TR -1500 TR
• Power: 1-3kw
• Warranty: 1year
• Country of Origin: India
• Size: 1000 TR -1500 TR
• Brand Name: World Cooling Towers
• After-Sales Service Provided: Yes
• Cooling Type: Perpendicular, Crossflow Cooling

• FEATURES: All structural in HDG Steel, SS 304 and SS 316 available upon request.
• Capacities: 10TR to 1500TR

The tower design incorporates a FRP distribution basin with number of flower type target nozzles in it and is located at the tower top. The water, by gravity, is dispersed over the fill media uniformly and water is allowed to pass vertically down along the honey comb fills. The fan coupled directly to the motor is placed horizontally to draw air across the fill media. A small portion of water is evaporated which removes the heat from the remaining water. In warm moist air is drawn to the horizontally placed fan motor and is discharged through the fan deck, to the atmosphere. The resultant cold water is collected at the cooling tower collection sump from where it is re-circulated to the application.

Cross Flow Cooling towers is one of the low maintanance, High efficiency Cooling tower because you can easily clean the fans while the tower is in operation and also the power consumption is very very less.

The GEM COOLING TOWERS is a pioneering product in Design & manufacture of FRP Cooling towers in South India. We are continuously striving to offer better Cooling solutions to customers, which are both, innovative and also state of the art. ECT is the Evaporative Coil Cooling tower which is an induced draft counter flow design Closed Circuit Cooler.

We are renowned as one of the major Industrial Cross Flow Cooling Towers Suppliers in India. Though the Cross Flow Cooling Towers are highly spacious and includes rotary sprinklers or tiny nozzles, the towers are easy to operate and maintain. The below mentioned salient features have made the FRP Cross Flow Cooling Towers ideal for various industrial applications. Salient Features : Low Power consumption Durability High Performance. The rectangular cooling tower or the closed type cooling tower or the cross flow cooling tower has a range of cooling capacity of a single cell cooling tower of around 70M3/Hr to 300 M3/Hr. The suitable refrigeration is between 120 and 440. Multiple cells may be fixed together. This installation plants are available when your cooling requirements exceed The motors in this cooling tower system are present outside the tower. This setup is devoid of the problem of hot mist. When compared to the section of motor inside fan, it is very easy to remove and thus repair.   Structure   Frame: The supporting structures are of hot-dip galvanized steel, used to reduce corrosion or rusting, thus ensuring extended life. Cross Flow Cooling Tower Capacity Water flow rate from 5 M3/Hr To 550 M3/Hr gives differences in temperature 4°C To 30°C Availability of Capacities from 5 TR T0 600 TR. Casing The casing of this industrial cooling tower is made of FRP (Fiberglass Reinforced Polyester).It is of light weight, simple to assemble and there is no need to paint. This reduces the cost of the cooling tower maintenance. Advantages Lower maintenance and longer service life. Available with PVC fills or treated wood fills, In virtually unlimited capacity The furnishing of the inspection doors of the tower are done in such a way to provide easy access to the inside for maintenance, inspection, float valve adjustment, sump flushing out and lift-out strainer cleaning. FRP fan specially designed for higher efficiency.  

Cross flow gravity distributes the water through the nozzles uniformly across the fill material. Cross flow is a design in which the air flow is directed perpendicular to the water flow Air flow enters one or more vertical faces of the cooling tower to meet the fill material. Cross flow of air continues through the fill and thus past the water flow into an open plenum volume. Water flows through the fill by gravity. A distribution or hot water basin consisting of a deep pan with holes or nozzles in its bottom is located near the top of a cross flow tower. Advantages of the cross flow design: Water distribution allows smaller pumps and Non-pressurized spray simplifies variable flow. Lower initial and long-term cost, mostly due to pump requirements.

We are engaged in offering cross flow cooling tower. These cross flow design, the air flows perpendicular to the water flow. The air is rotated around the fill to cool down and later is released that reduces the temperature of the place. The sturdy body is supported by stainless steel grips to ensure permanent positioning. Other parts are procured out of hot dip galvanized steel, that ensures durability of the machine.

• Brand Name: gireesh

We are offering cross flow cooling tower, gireesh cross flow cooling towers are designed & manufactured to deliver utmost space and energy efficiency. There is no need of maintenance for the rotary sprinklers or tiny nozzles. One can easily clean the distribution basin and nozzles even when the tower is operating thus, saving pump power. The fan, motor and water distribution system is easily maintained. Technical functions of the products are as follows: • the tower draws the air through the side and the upwards moving hot water gets collected in the frp basin fitted on the top and the air passes through the target nozzles and sprinkles over the pvc fills. Applications • aluminium die casting mc • air compressors • ac plant & chilling plants • plastic injection moulding mc and blow moulding mc • chemical industries • dairy, and food processing industries • distilleries and breweries plants • genets & megawatt projects • glass mfg. Plant • herbal, aromatics & extraction plants • industries heat process • oil refineries • pvc pipes mfg.plant • soap cosmetic mfg. Industries • steel factory and foundry.

Cross flow cooling towers system is a design in which the air flow is directed perpendicular to the water flow. Air flow enters one or more vertical faces of the cross flow cooling towers to meet the fill material. In this case the air that passes the water is not capable to pass waters at different temperatures. Thus the level of cross flow cooling tower in this case is less. The cross flow cooling tower is a pioneering product in design & manufacture of frp cooling towers in south india. No sprinkler distribution is possible in a cross flow cooling towers.

We are extremely humbled in offering our gratified clients an excellent range of cross flow cooling tower. For being a client-serving industry , our given range incorporates a complete range of quality product to our respected clients and our products are easily available in industry leading price. To ensure authentic service, we provide on time delivery of our products . Our persistent effort has hugely gratified our patrons . Followed by this, our products are highly appreciated by our clients. Features: the treated wooden splash box are supported on stainless steel grips to ensure positive and permanent positioning all other parts of made out of hot dip galvanized steel, to ensure maximum durability. The design incorporates accommodation of water with very high tds factors the fill media is of chemically treated imported pinewood.

cross flow cooling towers, bottle shape cooling towers

Crossflow gravity distributes the water through the nozzles uniformly across the fill material.Crossflow is a design in which the air flow is directed perpendicular to the water flow Air flow enters one or more vertical faces of the cooling tower to meet the fill material.

Wooden Cross Flow Cooling Tower, Heavy Duty Wooden Cooling Tower