Dryer / Drying Machine Dealers in Ramanathapuram, Coimbatore

It is a surprising fact that 100% of the electrical power (energy) is converted to heat energy during the Compression process In an Air compressor & all the heat energy goes as a waste if not used judicially.In a typical compression system, the theoretical recoverable heat is 96% of the overall electrical energy consumption. It consists of heat dissipated in the oil cooler (78%) the aer cooler (13%) and the heat radiated from the drive Motor (5%). The rest 4% heat cannot be recovered since 2% radiates through the canopy and the other 2% vents inside the canopy.

Even after washing your hands, invisible particles and smell sources stay on which trigger the growth of bacteria. The Sanitz hand dryer helps in drying and oxidising the invisible particles as well as smell sources from our hands, thus maintaining it clean, dry and hygienic. Go ahead shake hands with the world confidently. In the places where the user wants to dry his/her hands faster to manage time and overcrowd high efficient Hand Dryers are required. The elegant design with 360 degree rotating nozzles can redirect the air according to user’s requirements.

Intelligent Saving Microprocessorised load dependent regulation of DR series refrigerant dryers. Reduced quantity of refrigerant R 134a is the standard refrigerant used throughout the whole DR range. Unlike more traditional refrigerant dryers, the quantity required has been reduced considerably by up to 70%. Environmentally friendly BOGE refrigeration technology Anyone involved in refrigeration technology, has a special responsibility. That is why when designing the DR series, right from the outset, a great deal of importance was attached to the environmentally friendly manufacture, operation and final waste-disposal of our refrigerant dryers. Flow capacity:                      0,33 - 27,5 m3/min 12 - 972 cfm Max. operating pressure:    16 bar 235 psig

Blower Reactivated Dryers The adsorbants activated alumina or molecular sieve renegenrates on heating. These type of Dryers are energy efficient for dew points below -20 deg C for large air flows. There are several ways heating the bed of desiccant. The most common along with Trident series are as below:

• Voltage: 220V
• Condition: New
• Finishing: Polished
• Packaging Type: Carton Box
• Power Source: Electric
• Warranty: 1 Year
• Brand Name: Frank Compressors

Refrigeration Compressed Air Dryer (Nippydry) Principle of Operation Warm compressed air enters the Air / Air Heat Exchanger where it is precooled by outgoing cold dry air. The pre-cooled air enters the Air to Freon Heat Exchanger where it is cooled down to +3°C.   At this temperature, water condenses into liquid droplets, which are removed from the air stream by a very efficient Demister and automatically discharged by a Automatic Drain Valve.   The cold dry compressed air passes back through the secondary side of the Air to Air Heat Exchanger where it is reheated by the incoming warm air.   Features Dewpoint +3°C Designed for high ambient temperatures Advanced 3 in 1 heat exchanger for low pressure drop. Time delay for compressor safety Intelligent controller

Trident Pneumatics a prominent Heatless air dryer manufacturer support heatless air and gas dryers for industrial compressed air systems and other different applications.

• Weight: 380 kg
• Inlet Flow: 114
• End connection: 1"BSP
• Dimensions: 2000 * 750 * 650 mm

Features 1.Purge economizer, an energy saving device reduces purge loss to as low as 50%. 2.Programmable Controller, with clear functional displays, ensures uninterrupted operation even while tower changeover. 3.Automatic drain valves in pre and oil filter to reduce moisture load and to ensure life of desiccant at no extra cost. 4.All new Microprocessor based controller has a unique purge economizer. The dryer load can be manually set. It can also accept up to 3 compressor load/unload contact and compute dryer load dynamically. The purge is set accordingly. The controller also accepts a pressure input and purge air is controlled accordingly.

Principle of Operation Warm compressed air enters the Air / Air Heat Exchanger where it is precooled by outgoing cold dry air. The pre-cooled air enters the Air to Freon Heat Exchanger where it is cooled down to +3°C.At this temperature, water condenses into liquid droplets, which are removed from the air stream by a very efficient Demister and automatically discharged by a Automatic Drain Valve.The cold dry compressed air passes back through the secondary side of the Air to Air Heat Exchanger where it is reheated by the incoming warm air. Features Dewpoint +3°C Designed for high ambient temperatures Intelligent controller Time delay for compressor safety Advanced 3 in 1 heat exchanger for low pressure drop.

relax dryer machine, Retrofitting Services, Erection Commissioning Services

Tubular Fabric Relax Dryers, Open Width Fabric Relax Dryers

desiccant air dryers, Air Dryer, compressed air treatment systems

stainless steel clothes dryer

Air Compressor, rotary screw air compressors

medical air dryers

Air Compressor, Air Compressor Spare Parts, Automatic Drain Valves

Oil Dryers, Chocolate Fountain, lassi machine, Counter Cotton Candy Machine

medical air dryers, membrane dryer

UV Dryer, Punching Machine for Sheet Metal, Die Punching Machine

Medical air dryer, Diesel Engine Driven Compressor