Electric Converters Dealers in Coimbatore

We comprehend that natural and physical damages can cause harm to goods and hamper with the quality. Therefore, we make sure our products are wrapped firmly with superior packaging supplies. We ensure on time distribution of wholesale as well as retail consignments owing to an extensive vendor, distributor and logistic facility base. Features : 415V three phase output Fast, direct on line (DOL) starting for high demand loads Precise 9 stage output voltage balancing Capable of running multiple loads Connected motors produce 100% of their rated shaft power Power indicator lights Push button start and stop Over current protection 240V or 480V inputs available IP rated electrical enclosure with venting Wide range of output kW rating sizes available

• Application: Industrial
• Size: Standard
• Packaging Type: Box
• Warranty: 6 Months
• Country of Origin: India

We are offering two phase to three phase converters : three-phase power is not always available. To keep cost down, often only one phase is fed from a street transformer to a house. There are two options, if an industrial machine has to be connected. Installation cost for three-phase power lines may be high. Single to three- phase converters are another good solution. Phase convert two phase 415v into three phase 380v, 400v or 415v. Booster: standard converters for multi-motor applications. Motors will produce 100% nameplate torque continuously, up to 200% during start-up or excessive loads. One output socket. Booster e: high performance converters for all single and multi-motor applications and all hard-start conditions. Motors will produce 100% of nameplate torque continuously and up to 600% during motor start-ups and excessive loads. Two output sockets. For all motor start-stop, reverse, hard-start conditions (metal lathes, wheel balancers, irrigation pumps, conveyors, elevators, refrigeration systems, compressors, deep submersible pumps, hydraulic systems.). Input voltage is 380v, output voltage is 3x 380-415v.

Overview:   Signal Conditioners is a wall-mounting instrument compatible with strain gauge based transducers. It can support a maximum of 4 transducers when they are connected in parallel. Signal conditioners are used to accept for further processing of output signals. After which they are converted into voltages and currents. Voltage signals are used for processing with in the system and current signals are used for transmitting over long distances and then for further processing. The features of the signal conditioner are: • Output proportional to load• Simple to operate• Reliable• Easy to install• Rugged designed for industrial environmen

• Power: 2000 W
• Phase: Single Phase
• Warranty: 1 Year
• Country of Origin: Made in India
• Application: Industrial
• Brand Name: EVERON
• Current: 50 A
• Input Voltage: 230 V
• Output Voltage: 110 V
• Accuracy: 100 %

Phase Converter has been a part of BETA Phase Converters very name. Today, our applications for this technology are nearly endless. Our deep portfolio of existing installations, systems and services speaks to the lasting necessity of the industry we helped create. BETA Phase Converter strives to set "The New Quality Standard" in providing world class phase conversion solutions. BETA Phase Converters generate 3-phase electricity with an active hybrid generator which runs on single phase power. This technology is utilised to ensure the greatest possible return on your investment in terms of life span and energy consumption. Our phase converters are used internationally to power industrial 3-phase equipment with hi-performance and consistent quality. Two Phase To Three Phase Convertors For Motors offered by us is high in performance, low on maintenance and is used in diverse industries and other areas. Widely used to reduce of breakdown of electrical equipment, our range is also suitable for saving energy and require low maintenance. Single phase to Three phase for motors offered by us is high in performance, low on maintenance and is used in diverse industries, textile motors and other areas. Widely used to reduce of breakdown of electrical equipment, our range is also suitable for saving energy and require low maintenance. We are looking for queries for Power Engineering Equipment from Tamil Nadu,Maharashtra, Kerala, Bengaluru, Karnataka & Andhra Pradesh,allover india and export. We are highly engaged in manufacture an array of cost effective products that transfer regular 240V single phase or 480V two phase into 415V three phase. This includes single phase to three phase converters and inverters. Whether it is a simple single motor machine or a complex device, we have a solution to get it operational. We always offer a reliable and cost effective products to powering up all workshops. A three phase supply can be achieved in a matter of hours, instead of waiting several months for the electricity boards to respond. Features : 415V three phase output Fast, direct on line (DOL) starting for high demand loads Precise 9 stage output voltage balancing Capable of running multiple loads Connected motors produce 100% of their rated shaft power Power indicator lights Push button start and stop Over current protection 240V or 480V inputs available IP rated electrical enclosure with venting Wide range of output kW rating sizes available

• Static Regulation 0 â�� 100% load: : ± 1%
• Dynamic regulation 100%: : 5%, recovering to 1% within 40 ms
• Total harmonic distortion: : < 2% (Linear Load)
• Electronic Limit Overload: : 120%@60s; 150%@5s;200%@2s***
• Overload Capacity (IGBTs): : 150% Continuous
• Frequency stability: : ± 0.01% Crystal controlled
• Load power factor: : 0-1
• Efficiency: : 93%-98%

MAK Solid State Ground Power Unit   Our solid state Ground Power Unit / Static Frequency Converter, is now part of our standard Ground support Equipment and is the safest and most reliable solution for aircraft power supply requirements Mak's Static Frequency Converter units are designed with Power factor correction to guarantee a perfect sinusoidal input current from 25% to 150% load and a low THDi (

• Features: CE Mark Certified,State of the art semi conductor technology,Data logging

Our solid state GPU units, is now part of our standard Ground support Equipment and is the safest and most reliable solution for aircraft power supply requirements. Mak's Static Frequency Converter units are designed with Power factor correction to guarantee a perfect sinusoidal input current from 25% to 150% load and a low THDi (

• Power: 12 V
• Phase: Single Phase
• Current: 6amps/10amps
• Usage/Application: Home DC light
• Model Name/Number: Luminous charge controller
• Capacity: 10amps
•  :  

• Country of Origin: Made in India
• Power: 24V DC
• Brand: Ulive systems
• Responds time: Less than 500 micro Sec
• Accuracy: less than 1%
• Ripple Noise in output: Less than 0.5%
• Input Signals: 4-20mA, 0-5V, 0-10V
• Power Isolation: 1KV rms
• Output Signals: 0-5V, 0-10V

We are well known in the market for premium quality high voltage transformers that match the international quality standards. They weigh less and exhibit high output efficiency. The secondary voltage of these transformers is more than the primary voltage. These high voltage transformers offered by us safely step up the voltages from one level to another and are easy to handle. The transformer working is based on the principle of electromagnetic induction. They are also used for high voltage applications that need 12 volt input. They have a reliable and a durable construction. Our expert personnel test the efficiency and performance of these high voltage transformers before supplying them to the market.

Signal Converters, FLAT AND RIBBON CABLES, Compensating Cables, TRUCK CABLES

We are engaged in offering our customers with a wide range of highly efficient and performance oriented dc-dc converters. These are useful for converting source of direct current from one voltage level to another. These superior quality convertors are designed in a compact manner, thereby saving valuable space by replacing multiple batteries. The key specifications of the tdc-dc converters offered by us include: 13.5 v, 10 mps output dc-dc converter suitable for vhf radio dc100-input dc range 20 to 30 v dc100b-input dc range 40 to 60 v dc100r-input dc range 60 to 110v

static frequency converter, ground power unit, Electric Baggage

Signal Converters, Ferrules, Cable Cutters, Pilot Lamps, Push Buttons

dc voltage converter, Digital Programmable Thermostat

static frequency converter, air starter unit, environmental stress screening

AD9656 Analog-to-Digital Converter From Analog Devices Inc

phase converters

phase converters, Micro Controller Based Bag Filter Timer

2-phase 3-phase Converter, Switch Mode Power Supply Repair, Ups Battery

Dc Dc Converter, Electronic Resistors, thyristor switch, Integrating Circuit

Step Down Converter, air cooled transformers, Electrical Transformers

AC-DC Converter, bcMulti Channel Battery Charger