Electro Hydraulic Brake Dealers

• Material: Steel
• Feature: Corrosion Resistance, Flawless Finish, Heat Resistant
• Voltage: 110V
• Frequency: 50Hz, 60Hz
• Packaging Type: Catron
• Torque: 0-1000nm

The brake assembly contains of a brake arm, brake shoe, base frame, actuating lever, brake spring and an electro hydraulic thruster. The brake shoe is mounted on the brake arm and the gap between the brake drum and brake pad is adjusted by spring mechanism. A heavy spring suitable to give required braking force, is mounted in a square tube and a graduation scale is provided outside to note the spring force .The spring force can be adjusted suitably by tightening the nut at the bottom of the spring, All the components are mounted on the base frame This brake is normally in closed condition due to the spring force. The hydraulic thruster is actuated by an electric motor. When the power supply is on, the thruster motor is switched on and hydraulic pressure is developed in the hydraulic thruster. The piston is actuated instantaneously and the brake is released. When the power is cut off, the thruster motor stops thus releasing the hydraulic pressure. The thruster piston is pushed back and the brake pads clamp on to the brake drum. Due to the spring force, brake is applied.   Application Area     Cranes Conveyors Material Handling Equipment.

We are a celebrated Trader and Supplier of a wide assortment of Electro Hydraulic Thruster Brakes. These Electro Hydraulic Thruster Brakes are suitable for 440 Volts, 3 Phase A.C. We supply these Electro Hydraulic Thruster Brakes for a wide range of drum size from 100 mm to 600 mm diameter. The thruster rods are connected with the brake by means of an angle lever. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring, simulate easily, the brakes lever on the other side of the wheel is retroacted.

• Usage: EOT CRANE
• Product: THRUSTER BRAKE
• MOQ: 1

THRUSTER 18 KG TO 68 KGTHRUSTER BRAKE MDT 100X18 TO MDT 500X68 AVAILABLE

POWERMECH supplies complete range of Electro Hydraulic Thruster Brakes suitable for EOT Crane, Hoists, Steel Mills, Rolling Mills, Elevators, Lifts, Cement Equipments, Heavy Engineering Equipments, Surface mining machinery such as excavators, stackers, transporting systems and combination devices. Thrusters are supplied in cast iron body or aluminium die cast body as required. Electro Hydraulic Thruster Brakes are supplied to suit various make of crane such as Amsak crane, Apex crane, Atlas crane, Avon hoist, Electromech crane, Esquare crane, Grip crane, INDEF crane, Intelle crane, K2 crane, Kone crane, MM engineers crane, Krans Crane, Magna crane, NE crane, SL crane, Sri Pranav crane, Sun crane, TAK crane, Unitech, Viralishanmuga crane, WMI crane, etc. Also, Electro Hydraulic Thruster Brakes of various make such as Speed-O-Controls, Speed-N-Systems, Strom kraft, Electromag are supplied.   Applications:   ♠ Suitable for Crane, Hoists, Steel Mills, Rolling Mills, Elevators, Lifts, Cement Equipments, Heavy Engineering Equipments, Surface mining machinery such as excavators, stackers, transporting systems and combination devices.♠ In addition, it has a wide industrial application: brake activation, coupling drive, valve drive, gate valve drive, shearing machine, etc.

We are offering electro hydraulic thrustor brakes. Electro hydraulic thrustor: thruster brake is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the.

We are instrumental in the manufacturing and supplying of optimum quality Thruster Brake . These brakes are precisely manufactured in compliance with technical parameters using high quality metal and latest technologies. Appreciated for their simple functionality, rust resistance and hassle-free operation, offered brakes are demanded in textile, cable winding, rubber and food processing industries.   Salient Features : This is a spring loaded normally ON Failsafe Brake Consists of Electro Hydraulic Thruster, Torque Spring and Liner riveted to Brake Shoes Works on 415 V AC, 3 Phase, 50 Hz supply Requires Transformer Oil to be filled in the thruster cylinder Function is to bring to stop, moving / rotating machinery like motor / gearbox Holds / stops the load in desired place Prevents jerk due to soft stop Maintenance free, robust design   Details : Range - Drum diameter 100mm to 600mm Thruster Capacity (Kg) - 18, 34, 46, 68, 114 Torque Capacity - 6 Kgm to 580 Kgm Applications - All Material Handling and Lifting Equipments Hoisting - Electric wire rope Hoists and Crabs Cross travel and Long travel - EOT / Gantry / Goliath / Derrick Cranes Winches and Conveyors Lifts and Elevators

Speedage make Gravity (Counter Weight) Limit Switches are used for Heavy duty E.O.T. Cranes, Hoists, to prevent over travel of hoisting motion on power and control circuit up to 500 v.a.c., 50 cyclessec. and 40 Amps. continuous current. The housing of Gravity Limit Switch is made of cast iron Cast aluminium (IP 54).

We offer precision-engineered range of Electro Hydraulic Thruster Brakes. These brakes are ideally used to retard the speed of moving machinery. They are fabricated from the best grade raw materials and advanced components. Proper industrial rules and regulations are followed during the production of these brakes. We are a well-established Electro Hydraulic Thruster Brakes Manufacturer and Supplier from Delhi (India). The products delivered are thoroughly tested on various parameters to ensure their quality and durability.   Working To stop the moving machinery accurately to the desired position the braking force is applied to the brake shoes by a pre-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the bake drum and compressing of the spring is done by thruster.   Features Gentle application & release of brake without jerks & shocks Compact unit Constant magnitude Self aligned movement Low  power consumption Minimum maintenance Easy mounting and dismounting    Assembly & FunctionA thruster shoe brake has a pair of cast iron shoes which are lined up with friction pads. The shoes are hinged on main arm and side arm of the brake, each of them have a hinge pin fitted in the base. They are connected to each other on top by a tie rod, which is hinged in the main arm and locked to the swivel block in the side arm, by a lock nut. A crank lever is hinged on the main arm and the other end is fixed to the top clevis of the thruster by a hinge pin. A brake spring is fixed on the main arm and is pre-loaded by a lock nut on the lever. The pre-tension in this spring decides the braking torque. The thruster is fitted on the base drum by a hinge pin. When the thruster is not energized, the brake shoes are pressed on the brake drum fitted on the drive motor shaft and hold it under the effect of braking force provided by the spring. In such condition, the brake is applied and the drum cannot rotates the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted. When the first lever reches the stop on the brake base member the brake lever at the thruster begins to move, releasing the brake drum.  

• Country of Origin: India
• Size: 10-15inch, 15-20inch
• Type: Electro Hydraulic Brake
• Material: Metal
• Shape: Round
• Certification: ISI Certified
• Color: Gray
• Feature: Durable, Easy Installation, Heat Resistant, Precisely Designed, Robust Design
• Voltage: 440V
• Condition: New
• Frequency: 50Hz, 60Hz
• Packaging Type: Catron
• Warranty: 1yrs, 1 Year
• Torque: 0-1000nm, 1000-2000nm, 2000-3000nm, 3000-4000nm
• Brand Name: ABG
• After-Sales Service Provided: Spare Parts

• Material: Steel
• Color: Blue
• Usage/Application: Eot Crane
• Finishing: Polished
• Capacity: 1 Ton

• Application: All Material Handling And Lifting Equipments
• Thruster Capacity: 18, 34, 46, 68, 114 (kg)
• Min Torque Capacity: 6 Gms
• Min Drum Diameter: 100 Mm
• Max Torque Capacity: 580 Kgm
• Max Drum Diameter: 600 Mm

We are a prominent Exporter and Supplier of Electro Hydraulic Thrustor Brakes from Maharashtra, India. The Electro Hydraulic Thrustor Brakes that we offer are manufactured in line with the laid international quality norms. They are compact in design having superb strength. We offer Electro Hydraulic Thrustor Brakes to you all at the lucrative process. You can place even the bulk orders of Electro Hydraulic Thrustor Brakes with us! More about Electro Hydraulic Thrustor Brakes : Electro-hydraulic Thrustor brakes, designed particularly for use with overhead traveling cranes in hoisting. The robust designed Thrustor unit is compact & has long life and is easy to maintain. Main components used are of high quality cast iron or steel. Full force capacity is available from start to finish of full stroke. The Thrustor is operated by an integral three phase squirrel cage motor. In traveling motions electro-magnetic disc brakes are mounted directly on motors. DC brakes for hoisting and other motions can also be provided for specific application on request.

Electro hydraulic brake in several automobile garages, revealed the facts that mostly some difficult methods were adopted in lifting the vehicles for reconditioning.Now the project has mainly concentrated on this difficulty, and hence a suitable electronic control unit has been designed. Such that the vehicles can be lifted from the floor land without application of any impact force. By pressing the button in the dashboard, the electronic control unit activates the hydraulic jack automatically.

• Drum diameter: 100mm to 600mm
• Thruster Capacity (Kg): 18, 34, 46, 68, 114
• Torque Capacity: 6 Kgm to 580 Kgm
• Application: Winches and Conveyors, Lifts and Elevators, All Material Handling and Lifting Equipments.
• features: Prevents jerk due to soft stop., Maintenance free, robust design., ON Failsafe Brake

• Type: Electro Hydraulic Thruster Brake
• Material: Mild Steel
• Certification: ISI Certified
• Voltage: 415 v
• Condition: New
• Drum Diameter: 100-500 MM
• Application: EOT Crane, Engineering and Heavy industries
• Finishing: Powder Coated
• Phase: 3 Phase
• Automation Grade: Semi-Automatic

Introduction Thruster brake is a device used to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the brake drum and compressing of the spring is done by thruster. Assembly and Function  A thruster shoe brake has a pair of cast iron shoes which are lined up with friction pads. The shoes are hinged on main arm and side arm of the brake, each of them have a hinge pin fitted in the base. They are connected to each other on top by a tie rod, which is hinged in the main arm and locked to the swivel block in the side arm, by a lock nut. A crank lever is hinged on the main arm and the other end is fixed to the top clevis of the thruster by a hinge pin. A brake spring is fixed on the main arm and is pre-loaded by a locknut on the lever. The pre-tension in this spring decides the braking torque. The thruster is fitted on the base by a hinge pin. When the thruster is not energized, the brake shoes are pressed on the brake drum fitted on the drive motor shaft and hold it under the effect of braking force provided by the spring. In such condition, the brake is applied and the drum cannot rotate. As the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted. When the first lever reaches the stop on the brake base member the brake lever at the thruster begins to move, releasing the brake drum.    Features: Rugged design Consistent braking performance Robust in construction Long life Trouble free maintenance Easy in service