Globe Valve Dealers in Coimbatore

• Brand Name: TECNIK

We are offering Globe Control Valve. Ranges from 12" to 48". pressure class from 150 to 4500. moc : wcb, wcc, cf8, cf8m. tecnik make. manufacturing in thane.

• Body: Aluminium Bronze
• Bonnet: Bronze, Aluminium Bronze
• Nominal Size: 6″ to 20″
• Nominal Pressure: Class150 to Class300
• End Connection: Flanged
• Operation: Handle Operated, Gear Operated
• Face to Face Dimension: ASME B16.10
• Flanged End Dimension: ASME B16.5

• Type: Normally open, normally closed
• Valve housing, Cover: cast iron
• Max working pressure: 30 kgf/cm2
• Operating Temp Range: -20⁰ c to 205⁰c
• Port size: 1”, 1.5”, 2” BSP/BSPT/NPT
• Pilot port size: 1/4” BSP/BSPT, NPT
• Nominal bore: 25, 32, and 50

Ryder Oil Stop Valve is used in the Screw Compressor to stop the oil flow from the receiver to the Screw Compressor. The normally closed type oil stop valve is controlled by the pressure difference between the discharge pressure and the oil- injection pressure. It will close the oil line on stopping the compressor and re-open on starting the compressor. The normally open type oil stop valve is controlled by the pressure difference between the discharge pressure and the pressure in the oil receiver. Cover: Aluminium Guide Bush: Brass Piston: Aluminium Plug, Poppet, Seat Poppet, Rod Actuator: Steel (Corrosive Resistant)   Specifications :

• Material: Metal
• Color: Blue, Sky Blue
• Size: Available in Different Sizes
• Application: Water Fitting
• Pattern: Plain
• Pressure: High, Low, Medium
• Feature: Casting Approved, Durable

We are offering globe valve.

We provide ample assortment of oil stop valve that firmly impounds even large oil spills. Our air compressor oil stop valve is standardized as well as customized and can be provided as per customers drawings. We are predominant oil separator valve manufacturer and supplier in India; provide a profitable deal to our customers. The 2" Oil Stop Valve is designed for rotary screw air compressor application. The pilot port must be connected to compressor discharge upstream from the minimum pressure valve and preferably to the web side of the oil seprator. The intel port must be connected to the downstream side of oil cooler, thermal valve etc. to provide 5 psi pressure difference between the pilot and the inlet.

• Body: CI / WCB / F.S / SS 304 / SS 316
• Internals: 13% Cr Steel, Gun metal / SS 304 /SS 316
• Actuator: Hand Wheel
• Size range: 15mm to 50mm (Class 800 & Class 150 )

A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restric¬tion is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the Petroleum industry. A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipe line, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which a movable plug can be screwed in to close (or shut) the valve.  Special Features: Compact Design Maintenance free Bolted bonnet, solid wedge gate, outside screw and yoke with rising/non rising stem of gate valve, Plug type disc and outside screw and yoke are provided ease of operation Wedge – Ground and lapped to precision Gland – Self aligning type Integral satellite seat and backseat Applications Cement & textile industry Fertilizer & chemical plants Petrochemical Industries & Refineries Steel plants Thermal, hydel and nuclear power plants Pulp & paper Industry Water & sewage treatment plants Food and beverage industries Pharmaceutical industry & Gas pipelines Etc. Constructional Features Body The body is the main pressure containing structure of the valve and the most easily identified as it forms the mass of the valve. It contains all of the valve's internal parts that will come in contact with the substance being controlled by the valve. The bonnet is connected to the body and provides the containment of the fluid, gas, or slurry that is being controlled. Bonnet The bonnet provides a leak proof closure for the valve body. The threaded section of the stem goes through a hole with matching threads in the bonnet. Globe valves may have a screw-in, union, or bolted bonnet. Screw-in bonnet is the simplest bonnet, offering a durable, pressure-tight seal. Wedge The closure member of the valve, wedge are connected to the stem which is slid or screwed up or down to throttle the flow. Wedge is typically of the balance or unbalanced type. Unbalanced wedge are solid and are used with smaller valves or with low pressure drops across the valve. The advantages are simpler design, with one possible leak path at the seat and usually lower cost. Balanced plugs have holes through the plug. Advantages include easier shut off as the plug does not have to overcome static forces. Stem The stem serves as a connector from the actuator to the inside of the valve and transmits this actuation force. Stems are either smooth for actuator controlled valves or threaded for manual valves. The smooth stems are surrounded by packing material to prevent leaking material from the valve. This packing is a wearable material and will have to be replaced during maintenance. Seat Ring The seat ring provides a stable, uniform and replaceable shut off surface. Seat rings are usually held in place by pressure from the fastening of the bonnet to the top of the body. This pushes the cage down on the lip of the seat ring and holds it firmly to the body of the valve. Seat rings may also be threaded and screwed into a thread cut in the same area of the body   Technical Specification Design and Manufacturing Standard • API 602 / BS 5352 Testing Standard • API 598 / BS 6755 Size range • 15mm to 50mm (Class 800 & Class 150 ) Operation • Manual hand Wheel • Electrical and Pneumatic linear cylinder with accessories

• Material: Aluminium, Cast Steel
• Size: 3/4inch

Specialityvalve is one of the top Bellow Seal Globe Valve Manufacturer in India. A Bellow Seal Globe Valve is a type of valve that is used to control the flow of a fluid in a pipeline.  Available materials: WCB, WC6, SS304, SS316, F11, F51, F91, LCC, LCB, WCC Ends: Flanged, Buttweld, Socket weld, Threaded Class: 150 to 2500 Nominal Pressure: PN25 to PN450 Size: ½” to 24” https://www.specialityvalve.com/product-category/bellow-seal-globe-valve/

We provide ample assortment of oil stop valve that firmly impounds even large oil spills. Our air compressor oil stop valve is standardized as well as customized and can be provided as per customers drawings. We are predominant oil separator valve manufacturer and supplier in India; provide a profitable deal to our customers. The 2" Oil Stop Valve is designed for rotary screw air compressor application. The pilot port must be connected to compressor discharge upstream from the minimum pressure valve and preferably to the web side of the oil seprator. The intel port must be connected to the downstream side of oil cooler, thermal valve etc. to provide 5 psi pressure difference between the pilot and the inlet.

We are listed at the apex in the list of the prominent Globe Valves Suppliers, based in India. Unmatched quality and unsurpassable performance of our range of Globe Valves has attracted various industrial sectors to place repeated orders. Advantages High durability Compact design Resistance to abrasion Hassle-free operation Low maintenance cost   Applications Pharmaceutical industry Water Treatment plant Food & Sugar industry Oil & Petroleum industry Chemical & Process industry Power Plants Paper & Pulp industry Fertilizer industry   Material of construction Cast steel Casting Stainless steel Pressure Ratings 150 300 600 Ends Flanged Size Available ½” to 24 “ Applications Wheel Gear Actuator

• Material: carbon steel,cast iron,wcb,stainless steel
• Brand: SVR
• End: Flanged End, Screwed Ends
• Driving mode: Hydraulic, Electric, Manual
• Size: 2" to 16" inch

The OpGL globe control valve provides a superior  performance, while permitting easy, fast, inexpensive maintenance. Unlike diaphragm-operated control valves, the spring cylinder-actuated OpGL provides stiffness and  maintains high positioning accuracy controlled, and a faithful response. Since it handles up to 150 psi (10.3 Barg) supply air, it also has the thrust necessary to shut off against much higher fluid pressures. Most diaphragm actuators rely entirely on springs to close the valve. But with the OpGL control valve, the spring force, the supply air pressure and the fluid pressure itself, are combined to produce an exceptionally tight shutoff. Because of its self-aligning seat ring, shutoff is made easier to be achieved in the OpGL control valve. Most common maintenance problems with globe control valves can be traced to cage-guiding. The close metal-tometal contact between the cage and the plug often results in galling and sticking. That is why the OpGL is double-top stem guided thus completely avoiding contact between the plug and the seat retainer. The clamped-in seat and top entry trim permits easy, quick maintenance. Plus, with OpGL’s high degree of parts interchangeability, fewer inventory parts are needed and costs are therefore reduced. The actuator is also of a compact design, smaller, lighter and easier to handle than comparable diaphragm actuators. With Optimux’s quick-and-express manufacturing system, shorter deliveries at no extra costs are possible for the customer. OpGL.The simple, reliable, rugged and economic globe valve.  

We stand tall as a reputed Manufacturer and Supplier of Globe Valves based in Tamil Nadu (India). The Globe Valves that we deal in are manufactured using the latest methods of production and thus good for regulating flow. Owing to our vast distribution network, we are capable of delivering our valves within then given time period. For price quotes, stay assured to get the best quality at discounted rates.

Forged Steel Globe Valve, high pressure globe valves, Cryogenic Globe Valve

Bellow Seal Globe Valve, Forged Steel Globe Valve, Cryogenic Globe Valve

Feature A Globe Control valve with superior performance Piston- cylinder actuators Easy Disassembly, including removal of bonnet and bolt. Tight Shut- Off guaranteed. Lower lifetime cost design

Globe Valves, Lift Check Valve, Mini Monoblock Pumps, Non Slam Check Valve

SS Non Slam Check Valve - IBR & NON-IBR, Boiler Fire Doors & Ash Doors

Y Type Slurry Valve, Ram Bottom Outlet Valve, Blow-Off Valve

valve bonnet, Ball Valve, Valve Body, Strainer Valve

Globe Valves, Ball Valves, Solenoid Valves, Pneumatic Fittings

Globe Valves, Ball Valves, pp pipes, polypropylene valves, Pipe Fittings

Bolted Bonnet Flexible Wedge Gate Valves, Cryogenic Globe Valves

Cast Iron Casting, Butterfly Valve

Gate Valve

16 ANSI 600 Globe Valve

Cast Steel Globe Valves, Fittings, Cast Steel Gate Valves