Hammers Dealers in Coimbatore

• Brand Name: Subi Tek
• Model Number: Subi Tek
• Place of Origin: Covai
• Red: Blue

Concrete Test Hammer Specifications : Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case. Taag: Concrete Test Hammer Dealer in Chennai, Concrete Test Hammer Supplier in Chennai, Concrete Test Hammer Manufacture in Tamilnadu

We are known for delivering the orders within the specified time frame owing to our modern transit facilities. As a trusted name, we make use of only premium packaging material to pack the products in order to ensure their complete safety during transit. Moreover, our packaging experts strictly check the same.

Rebound Hammer is a device for measuring elastic properties/strength of concrete/rock and helps in testing mainly surface hardness and penetration resistance properties. Specification: · Usage: Concrete Rebound Hammer · Testing instrument: Concrete Rebound Hammer · Color : CustomizedFeatures: · Portable and flexible· Simple and convenient to use· Adjustable friction of pointer· Particularly used on the site to carry out non-destructive NDT test

• Handle Material: Steel 
• Warranty: 6 months
• Brand: GROZ
• Model Name/Number: CHID/2.5/12,CHID/4/12

Tumbling hammers, typically used in conjunction with rigid frame discharge electrodes, are highly efficient but require a lot of maintenance when employed in a moving gas stream. Hammers are connected to a rotating shaft.  

• Warranty: 1 Year
• Country of Origin: Made in India
• Type Of Hammer: Sledge Hammer
• Brand: groz
• Head Weight: 4 lbs
• Material: copper

• Weight: 1187 Kg
• displacement: 230mm Max
• round working capacity: 60mm Max
• square working capacity: 50x50 mm
• Engine power: 5,5 Kw
• Size: 50KG/220 PER MINT
• Brand Name: NARGESA
• Model: MP50

With the aid of our well-established network and cordial associations, we are able to cater to the wide requirements of the buyers based in Hubli(India). Buy the best quality sledge hammers at rock-bottom prices from us. We are a reckoned name in the town

• Material: Plastic, Metal
• Brand: Dewalt
• Voltage: 240 V
• Warranty: 1 Year
• Speed: 2400 RPM
• Color: Yellow And Black
• Model Name: D25133K IN
• Application: Construction
• Product Type : Combi Hammer

• Usage: Construction, Household, Industries
• Weight: 1-2Ton, 100-200kg, 10kg-100kg, 200-300kg, 300-400kg, 400-500kg, 500-600kg, 600-700kg, 700-800kg, 900kg-1Ton
• Condition: New, Used
• Handle Material: Aluminium, Copper, Metal, Steel, Wooden
• Speciality: Durable, Fully Heat-treated, Magnetic Nail Start, Polished Bell Face, Rust Proof, Slip-resistant Handle
• Warranty: 1Yrs, 6months
• Hammer Type: Ball Pein Hammer, Claw Hammer, Club Hammer, Cross Pein Hammer, Machinist Hammer, Sledge Hammer
• Handle Length: 10inch, 11inch, 12inch, 7inch, 8inch, 9inch

• Brand Name: Saw Master
• Voltage: 220 V
• Model Name/Number: SWM194
• Rated Input Power: 1250 W
• No Load Speed: 14000 r/min
• Blade Diameter: 65 mm

• Rated Power Input: 1100(W)
• Rated Impacting Frequency: 2900(.../min)
• Max. Drilling Capacity: Φ38(mm)
• Net Weight: 6.2(kg)
• Item Code: ITM000614
• Drilling Diameter: 38MM
• Brand: DONGCHENG
• Model Name/Number: DZC03-38
• No Load Speed: 320 RPM

• Brand Name: MAL, DCA, Dongsheng, IDEAL, Bosch, Stanley, Powrtex,
• Weight: 16 Kg
• Voltage: 230 V
• Frequency: 50 Hz
• Power Consumption: 1500 W
• Usage/Application: For Drilling
• No Load Speed: 1400 RPM
• Packaging Type: Box
• Model No: 4565 B
• Maximum Drill Shank: 30 mm
• Input Power: 1500 W

• Weight: 5kg
• Warranty: 6 Months
• Handle Type: Pistol Grip
• Application: Drilling
• Brand Name: Dongcheng
• Color: Blue
• Power Consumption: 750W
• Drilling Diameter: 26 mm
• Product Type: Electric Demolition Hammer
• Model Name/Number: DZC03-26B
• Speed: 500 rpm
• Dimensions: 34 x 28 x 8 cm
• Chuck Size: 26.26 mm

• Features: Precise design, Durable finish , High strength.

• Weight: 11 Kg
• Warranty: 6 months
• Impact Energy: 25 J
• Power Consumption: 1600 W
• Model Name/Number: VDM-1101 E
• Length of cord: 4m
• power source: AC
• MOTOR TYPE: BRUSHED
• LOCK ON SWITCH: YES
• RPM: 1100

We manufacture drilling hammers in different sizes ranges. These drilling hammers are made corresponding to drilling bits to carry out prevalent objectives.

• Type: Ring Hammers
• Material: Cast Iron,Manganese steel,
• Feature: Reliable ,Cost Effective ,Easy To Use
• Application: Power Generation Industry
• Condition: New,Used
• Finishing: Coated,Non-Coated
• Color: Sliver,Black,Grey,White

FAST CUTTING ACTION DESIGNED FOR ALL GENERAL WORK EASY CHANGE RETAINER

In our range of forged tools we produce Striking Tools or Hammers. The hammers produced by us are Claw Hammer, Sledge Hammer, Machinist Hammer, Ball Pein Hammer, Club Hammer, Cross Pein Hammer & Stonning Hammer. This range of tools is used by Industrial and DIY segments. In this way, this range comes under the category of Industrial Tools & DIY Tools.