Heat Exchangers Dealers in Kovaipudur, Coimbatore

• Type: Dry Cooling Towers
• Material: FRP
• Certification: ISO 9001:2008
• Application: Dry Cooling
• Color: Blue, Grey
• Condition: New
• Power: 1-3kw
• Warranty: 1year
• Country of Origin: India
• Brand Name: World Cooling Towers
• Feature: Naturally Resistant To Rot And Insects, Cooling Efficiency, Longevity, Cost-Effectiveness
• After-Sales Service Provided: Yes
• Cooling Type: Dry Cooling

The FRP Square Cooling Tower, which we offer, is manufactured as per the set industrial standards. Also, we undertake repairing and revamping services of any type of FRP Square Cooling Tower. We offer these FRP Square Cooling Towers at competitive rates to the clients. Highlights Operates on the induced draft counter flow principle operationThe fan creates air movement vertically pulled upwards on tower across the fills in opposition to the water flowHot circulating water enters the water inlet headers and sprays through non clogging PP spray nozzleEven Water distribution Well-designed PVC Drift Eliminators are fitted Reduces Drift LossesHas an Inspection Door Allows easy access for inspection and maintenanceSquare tower can be installed in multi cell also Cooling Tower Capacity : Ranging from 5TR to 600 TR in Single cell and as per requirements of client in multi-cells. Benefits Compact design, corrosion resistant and lightweightDurable service LifeMaintenance freeHigher efficiencyMinimum drift loss of waterNo contamination, due to dust or foreign particlesPiping cost negligible and suitable for small unit Assembly FRP Casing : Cooling Tower Casing is made of selected grade materials of tough Fiber Glass Reinforced Polyster and resins etc. An additional embossing is provided for extra strength of large Cooling Towers.Header Pipes : The header pipe designed for proper distribution of water over the FILLS so that proper contact time for air to water is achieved. The header pipe is manufactured in G.I., P.P. with FRP moulded construction which makes it Non Corrosive Type & Long Lasting.Water Distribution Nozzle : We are offering low pressure drop, non-clogging, ABS make solid cone type nozzle for distributing the water on the fill pack area. Each nozzle is designed to operate on a water fluctuating load as good as 20%. Each nozzle can cater the service area of 1.2m x 1.2m at an inlet pressure of 0.3 kg. Per cm.sq.Drift Eliminator : CCS Drift eliminators, to reduce carry over losses through of moistures drop in the air stream. The individual drift eliminators of s-shaped corrugated sheets are bonded with subsequent layer to creat the structure.PVC Honeycomb Fills : PVC Honeycomb type fills having extended contact area. Splits incoming air and water into several streams spread evenly across the water cross section increasing heat transfer rate easy to replace.

Closed circuit cooling towers are one of the methods of heat transfers. They are hybrids that pass the working fluid through a tube bundle, upon which clean water is sprayed and a fan-induced draft applied. The resulting heat transfer performance is much closer to that of a wet cooling tower, with the advantage provided by a dry cooler of protecting the working fluid from environmental exposure and contamination.

The exchangers are very high efficient and best product. High Quality design with high heat transfer ability. The advantages and problem areas with different heat exchanger types and materials are discussed. Marine heat exchanger is its size, cost and ease of adapting existing cold water systems to hot. Researchers, over the years, have used a variety of heat exchanger types and materials. The application of heat exchangers to large scale marine aquaculture.

We are the leading manufacturers of Removable Tube Sheet heat exchanger in India.  A Removable Tube Sheet heat exchanger is the most common type of heat exchanger in all Industries. Mostly used in higher-pressure and Higher Temperature applications.   The special features of Removable bundle type heat exchanger is that the tube bundle can be withdrawn from the shell which facilities cleaning of the outer surface of the tubes and inner surface of the shell. The sealing between the shell and tube side fluids achieved by means of rubber rings which set in a groove between the tubes a shell flange.

Aluminium Heat Exchangers materials include aluminium, carbon steel, stainless steel, nickel alloys, and titanium. Aluminium Heat Exchangers high thermal conductivity allows heat to pass through it quickly. Aluminium Heat Exchangersof these properties enable copper to be specified for heat exchangers in industrial facilities, HVAC systems, vehicular coolers and radiators, and as heat sinks to cool computers, disk drives, televisions, computer monitors, and other electronic equipment.

Adiabatic Cooling Tower unit built thus on scale back the body of water air temperature to the coil. This provides the shoppers with important reductions within the price|cost of capital opportunity cost of the cooler further as reductions within the cost of power consumption. associate electronic temperature controller is employed to regulate the fluid (process water) temperature inside rigorous tolerances. This temperature controller pulses the sprays of water onto the cooling pads to relinquish solely the minimum of adiabatic cooling of the body of water air needed for any given load and close condition.All style options area unit in to produce a protracted product life.  

We are the leading manufacturers of Vertical Shell and Tube Heat Exchanger in India. A Vertical Shell and Tube Heat Exchanger is the most common type of heat exchanger in all Industries. Mostly used in higher-pressure and Higher Temperature applications.

Counter Flow Cooling Tower   The air flow is directly opposite to the water flow in counterflow. Gravity distributes the water through the nozzles uniformly across the fill material. Advantages of the counterflow design is Spray water distribution makes the tower more freeze-resistant. Disadvantages of the counterflow design is basically higher initial and long-term cost, and Difficult to use variable water flow, as spray characteristics may be negatively affected.

We Manufacture Reboilers Heat Exchangers are typically used to provide heat to the bottom of industrial distillation columns. They boil the liquid from the bottom of a distillation column to generate vapors which are returned to the column to drive the distillation separation. Image depicts a typical steam heated kettle reboiler. Kettle reboilers are very simple and reliable. They may require pumping of the column bottoms liquid into the kettle, or there may be sufficient liquid head to deliver the liquid into the reboiler. In this reboiler type, steam flows through the tube bundle and exits and condensate. The liquid from the bottom of the tower, commonly called the bottoms, flows through the shell side. There is a retaining wall or overflow wall separating the tube bundle from the reboiler section where the residual rebolied liquid (called the bottoms product) is withdrawn, so that the tube bundle is kept covered with liquid. Manufactures Reboilers, especially for Process Chemical Industries with main focus on petrochemical units. These reboilers are an accessory to a distillation column, where the back liquid from the column gets reboiled and sent to the column for separation. The typical material of construction is High Carbon Steel and the design pressure is as high as 30 bars. The manufacturing is done as per ASME and TEMA standards. Advantages 1. Reboiler has a less-sensitive operation than vertical types. 2. More area can be placed in a single shell than with vertical units. Especially suited for large sizes and high duties. 3. Easier maintenance due to horizontal orientation. 4. More suitable for wide boiling mixtures.

We are involved in offering a comprehensive range of Natural Draft Cooling Towers, which doesn’t require any fan, or PVC fills for operation. These are 100% safe and works efficiently without any power or maintenance like other towers. The aerodynamic design and FRP louvers provided reduce spillage and evaporation loss. These are also equipped with hat dip galvanized structural and S.S. fasteners which ensures durability and efficiency of these tower. Our range of natural draft cooling towers can be installed with any type of cooling application. In addition the non-clog nozzles fitted in the tower are easy to clean. We offer these towers at very affordable price and even offer some spare nozzle with this tower. Features of Natural Draft Cooling Tower No requirement Fan, Motor and PVC fills. Power saving (no power consumption to induce air flow- no fan) Low maintenance FRP louvers reduces spillage and evaporation loss Hot Dip galvanized structure and S.S fasteners increase the life time and efficiency of cooling tower Can be installed for any range of cooling applications Non clog nozzles Easy to clean Environmental Friendly No Mechanical Noise Safety of operation The Natural draft cooling towersare particularly pretty as a cost-saving solution for power plants and other industrial plants requiring larger quantities of cooling water. Natural Draft cooling tower operates without fans and Fills, the large amount of electric power or else required for large cooling tower systems is not required. The mandatory cooling air is pass on through the tower by natural draft henceforth neither fan nor fan power is required for these kind of Cooling Solution. No maintenance required like other Wet (or) Dry Cooling Towers. By using of Non clock nozzle are easy to cleaning reqduce spillage and evaporation loss. Hot Dipped Galvanized Structural’s and S.S.fasteners increase the lifetime as well as the efficiency of the cooling tower it can be installed for any range of cooling application. Structure : Is made from heavy M.S.Angle/Tee/Channel sections and Hot Dipped Galvanised or lined with FRP for corrosion resistance. Louvers : Are made from Fiberglass Reinforced Plastics which ensures corrosion resistance and good mechanical properties. Water Distribution Headers : Are made from “c” class galvanised pipe. Nozzles : Are made from Rigid PVC (or) Brass Nozzle to give good corrosion resistance. Nuts and Bolts : Are made from Stainless Steel (or) HDG Bolt and Nuts. Features and Functions of Natural Draft Cooling Towers Natural Draft Cooling Tower especially hold attraction as solution for saving costs for large industrial plants and power stations; that require large amounts of cooling water. The needed cooling air is transported to the tower with the help of natural draft. Hence there is no necessity for fan or fan power. It is also used for the release of treated exhaust gas. It also implies that there is no need of gas reheating or chimney. PVC Fills, motor, fan are not required by Natural Draft Cooling Towers. FRP Louvers that are specially designed aerodynamically, minimize evaporation loss and spillage. Be Sociable, Share! Tweet

Hi Tech equipment cooling tower nozzle is designed to discharge water spray into a confined area. The discharge pattern is long and narrow and will effectively protect long, narrow, passageways which are limited in height. Although designed to protect water cooling towers, these nozzles may be used in other areas where lengths of throw up to 20 feet may be required.

The heat exchanger is completed of concentric inside also exterior pipe and the Heat exchangers are used to transfer the energy from one substance to another.    Thermal design Calculation Q = UA ?TlmAfter determination of the required heat transfer surface area, Other Mechanical Design are made, With reference to Process applications. We JC Equipments Pvt Ltd Coimbatore India manufacturers of double pipe heat exchangers in India. A double pipe heat exchanger like Shell and Tube Heat Exchangers. We provide high and international quality standards double pipe heating system. We using latest raw material in the making development of double pipe heat exchangers.This type of heat exchangers are mostly used in the fields of Thermal Power Station, petroleum and Heat Industry, Oil and food Plants, Power Stations and etc.   Counter flow and Parallel Flow Heat Exchanger Multi tube Double pipe exchangers Single tube Double pipe exchangers Countercurrent Double Pipe Heat Exchanger Double Pipe Hairpin Type Typical Double Pipe Heat Exchanger Double Pipe Heat Exchangers Applications JC Equipments are offering Double pipe for the below industrial application. Features of Double pipe heat exchanger: High Efficiency, International high quality, Low Maintenance Cost, Quick Heat Transfer. Double pipe heat exchanger Calculation: We are using most excellent softwares for support of complicated calculations while design of double pipe heat exchanger. Double pipe heat exchanger Design : JC Equipments Pvt Ltd used top rated softwares to design and best quality design engineers to design your double pipe heat exchanger. The heat exchangers are usually designed in a hairpin shape with ASME Code and will typically be either counterflow or parallel flow.1. ASME (American Society of Mechanical Engineers) ASME Code2. TEMA (Tubular Exchangers Manufacturers Association) Tubeside with High pressure Pasteurization Low allowable pressure drop Digester heating Heat recovery High flow rate ratios High terminal temperature differences. Pre-heating Its dependable and once-through Effluent cooling. Especially in cases of process-temperature crosses  

• Features: Controls Permeability, Low Moisture Levels, Requires minimal maintenance, Controls nominal outlet moisture.

• Features: Quickly exits the hot air, Low noise operation, Quality approved

This rugged war horse in our stables, incorporate multi blade, cast aluminum, adjustable pitch fan assembly driven by special T.E, IP-55 protected Geared Motor with low R.P.M and higher air discharge capacities. The tower structural and supporting sections are HDG Steel, fastened with SS fasteners, and suited for hot, harsh and humid atmospheric industrial conditions. The standard cladding profile of corrugated asbestos cement sheet, the joints of which are lapped to minimize water spillage. The Treated Wooden Splash bars, the fill media, are supported on FRP Grids to ensure positive and permanent positioning. The wooden splash bars are of imported pine woods, chemically treated to arrest fungal or algae formations. The design incorporates accommodation of waters with very high TDS factors The hot water from the source when circulated to the collection basin with flower pot nozzles, are sprayed over the fill area. Simultaneously, air is induced through the fill media thus taking away the latent heat from the water passing through the fill media.   SALIENT FEATURES   The fill media is of chemically treated imported pinewood. The treated wooden splash bars are supported on Stainless Steel Grips to ensure positive and permanent positioning. The design incorporates accommodation of water with very high TDS factors All other parts of made out of hot dip galvanized steel, to ensure maximum durability. Compact in design, saves space and energy Easy maintenance by design All structural in HDG Steel Chemically pine wood acts as the fill media and are resistant against fungus and algae and can water with foreign particles Heavy duty geared box of mono block type to enhance air suctions Adjustable pitch axial flow, dynamically balanced aluminium fans APPLICATIONS Aluminium die casting m/c Air compressors A/C plant & cold rooms Blow moulding M/c Chemical industries Dairy,Citrus and other food processing industries Distilleries and Breweries plants Diesel / Gas Gensets & Megawatt Projects Glass Mfg. Plant Herbal,Aromatics & extraction plants Industries heat process Oil refineries Plastic injustion moulding m/c PVC pipes mfg.plant Soap / Cosmetic mfg. industries Steel factory and foundry ADVANTAGES   Eliminates fill media and hence maintenance Eliminates motor / fan and hence power consumption Used for high temperature applications Used for industries having polluted waters All structural in HDG Steel, to arrest rust All joints with SS fasteners Aero dynamic designed FRP / GI louvers Delta T temperature drop 4 °C to 30 °C, in a single cell Specially designed non clog nozzles to atomize water to mist

• Size: 4 inch
• Inlet Temperature: 260 Degree Celsius
• Country of Origin: Made in India
• Surface Finish: Polished

We have with us a comprehensive range of water cooled after cooler, which is manufactured in line with the prevailing industry standards. Our range is highly demanded in the market for because of lower air temperature and removal of moisture removal. These compressed air water cooled after coolers are suitable to be used in places where water is hard or there is other constraints on availability of soft cooling water.   We are the leading manufacture in water cooled aftercooler  & also supplier in tamilnadu(chennai, coimatore, trichy , madurai, salem, erode, thirunelveli, ) kerela( cochin, thiruvanathapuram, palghat, calicut, karnataka, andhrapardesh

• Brand Name: JC Brand

Dear sirmadam, greetings for the day… we jc equipments pvt ltd take pleasure to introduce ourselves as one of the leading designers, manufacturers & exporting of all kind of cooling towers,heat exchangers pressure vessels columns, storage tanks, air cooled condensers, etc.. In india. Jc equipments pvt ltd started in the year of 1989. We have wide knowledge in this field and we have regular customers throughout the world. We are authorized manufacturers of asme and we have “u, s & r” stamp certification also. We are corporate member of cti, usa. We are a world class manufacturers and we never compromise in quality. We assure our product will be best quality and competitive price. Herewith we have enclosed the product profile for your kind reference. Kindly refer the attachment. Looking forward your valuable enquiry for us to quote our best and competitive offers, with assuring you of our best quality and prompt service at all times.

We are Supplier of this product.

A double pipe heat exchanger is one of the simplest form of Shell and Tube Heat Exchangers. Here, just one pipe inside another larger pipe. To make an Unit very Compact, The Arrangement is made Multiple Times and Continues Serial and Parallel flow. One fluid flows through the inside pipe and the other flows through the annulus between the two pipes. The wall of the inner pipe is the heat transfer surface.This is also called as a hairpin heat exchanger. These are may have only one inside pipe, or it may have multiple inside tubes, but it will always have the doubling back feature shown. In some of the Special Cases the Fins also Used in Tube side.

• Type: Fin tube heat exchanger
• Brand Name: TRINITY
• Certification: TUV
• Application: Heating application in Food, Textile, Tea, Modern rice mill
• Warranty: 12 months
• Liquid Flow Rate: As per customer'srequirement
• Place of Origin: Coimbatore , Tamil Nadu, India
• Raw Material: SS 304, SS 316, Galvanized iron
• After-Sales Service Provided: not provided

We are offering highlight of our heat exchanger fins are used to increase the effective surface of area of heat exchanger tubing. Finned tubes are used when the heat transfer co efficient on the outside of the tube is appreciably lower than that on the inside. When an extended surface is needed on only one fluid side or when the operating pressure needs to be contained on one fluid side. Owing to the excellent heat transfer ability, these finned tube heat exchangers are highly in demand our product specification: s.no description moc size 1 fin material aluminium, stainless steel, copper, carbon steel 2 tube material stainless steel, galvanized iron, carbon steel, copper 3 tube size as per design requirement fin specifications hot dip galvanized finned tubes: these finned tubes are used where air is corrosive or having more moisture. This gives longer life of finns. Finned tubes with g.i. Finns: these finned tubes are having g.i. Finns which is used for longer life of finns against corrosion. S. S. Finned tubes: s.s. Finned tubes are having s.s. 304 & 316 tubes & finns. These finned tubes are widely used in pharmaceuticals & food industries. These tubes have no corrosion problem & longer life.

Dry Cooling Tower, fined heat exchangers, coil cooling towers, FRP Fans

Tube Bundle, Air Cooled Condensers, Air Cooled Heat Exchanger

• Type: Cooling Tower
• Material: FRP, RCC, Wooden
• Weight: 0-100kg, 100-200kg, 200-300kg
• Color: Blue, Light White
• Voltage: 110V, 220V, 380V, 440V.580V
• Condition: New
• Automatic Grade: Automatic, Manual
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Country of Origin: India
• Brand Name: Welltech Cooling Systems

Cooling tower is one type of heat transfer equipment. Process water is cooled by ambient air by direct contact in wet cooling tower and indirect contact in dry cooling tower. We offer following in house design and fabricated cooling towers.

Hot Plates, ultrasound therapy unit, TENS, Sterilizer

aluminium sprinklers, aluminium fans, fibre cooling tower, PVC Fill