Heat Exchangers Dealers in Malumichampatti Village, Coimbatore

We are well renowned manufacturers and suppliers of Aluminum Extruded Finned Tubes. These tubes are provided by us with 100% fin-to-tube bond and they yield exceptional longevity and efficiency. The maximum operating temperatures these tubes can withstand are in the range 250°C to 290°C.Aluminum Extruded Finned Tube is the most substantial component of the heat exchangers’ technology. The design, size and material type can be chosen as per the customer’s requirements. Their individual design mono or bimetal delivers great resistance and excellent heat transfer characteristics. Corrosion resistance is guaranteed as we provide an excellent mechanical bonding that connects liner tubes and aluminum wall. Superior durability and reliability are some of its strong characteristics. Features: High performance Less maintenance High quality Long service life Durable structure

An aftercooler was the cooler whose outlet fed the engine. Some systems had a cockpit control for opening or closing a damper to the intercooler/aftercooler, providing another way to control temperature. Aftercoolers are heat exchangers for cooling the discharge from a air compressor. They use either air or water and are an effective means of removing moisture from compressed air. Aftercoolers control the amount of water vapor in a compressed air system by condensing the water vapor into liquid form. In a distribution or process manufacturing system, liquid water can cause significant damage to the equipment that uses compressed air. An aftercooler is necessary to ensure the proper functionality of pneumatic or air handling devices that are a part of process manufacturing systems. Aftercoolers can use either air-cooled or water-cooled mechanisms.

• Type: Heat Exchangers
• Certification: ISO 9001:2008 Certified
• Condition: New
• Warranty: 2 Years

the gasketted plate and frame heat exchangers that are made by us are premium in quality which is made using the best variety of raw materials. This plate heat exchanger is corrosion resistant and can easily be installed anywhere. Plate and frame heat exchangers comes in a compact design that assures greater efficiency, low hold-up volume, expandability and flexibility, easy maintenance, and close temperature approaches.  high heat transfer coefficients, ensuring the designed surface area is kept to a minimum.  compact design, saving on plant room space requirements.  ease of maintenance.  exchanger outputs can be increased by adding additional plates.  exchangers can achieve high cross over temperature profiles.  low standing losses in comparison with other exchanger types.

• Material: Mild Steel, Stainless Steel
• Certification: CE Certified, ISO 9001:2008 Certified
• Application: Marine Use
• Color: Blue
• Material: Mild Steel, Steel
• Medium Used: Air, Water, Oil

We offer Finned Tube Heat Exchangers, which are designed as per the international standards and requirements of the clients. These Finned Tube Heat Exchangers can be employed for cooling or heating of air or other gases which flow in a duct or cooling of water and other liquids using air. Also, these Finned Tube Heat Exchangers are provided with Aluminium extruded finned tubes. These Finned Tube Heat Exchangers are manufactured with copper, aluminum, stainless steel, admiralty brass, cupro-nickel or carbon steel. Apart from this, these strongly constructed Finned Tube Heat Exchangers are widely used in different applications like air laden with abrasive particles, corrosive fluids and air heating with steam and designed for special custom-built applications. Highlights Rugged construction Corrosion resistant Available with customization High durability Low maintenance cost Trouble-free operation Industrial Applications Food processing Textile SugarDrier Manufacturing Cement plants

The Air Cooled condenser is made of modules arranged in parallel rows as like Air Cooled Heat Exchanger. The module contains number of Finned Tube bundle. The axial flow forced draft fan is fixed in the module and forces the atmospheric cooling air across the Condensate area of the fin tubes.The scope of supply of an Air Cooled Condenser will include all turnkey job from supporting structure, steam ducting from the steam turbine interface and all auxiliaries like pumps, duct drain tanks, instrumentation and air evacuation units related piping works.

• temperatures: 180ºF (82.2ºC)

Our Closed Circuit Cooling System gives completely rated thermal presentation, which also by yourself verified over special types of flow and high temperature requirements. Closed Circuit Cooling Towers are high effciency and water saving.

Heat Transfer Equipments Air Cooled Heat Exchangers are designed and fabricated in accordance with ASME Section VIII, Div. 1.   Air cooled heat Exchangers are same In the Functions of Finned Tube Heat Exchanger. This type of Heat Exchangers are Specially used in Large Quantity cooling Requirements. We are main Suppliers Air cooled Heat Exchanger for Oil Refineries and Process Fluid Cooling. The most economical and most common style air cooler, the forced draft ACHE, uses axial fans to force air across the fin tube bundle. The fans are positioned below the bundle thus not exposing the mechanical sections to the hot exhaust airflow. The forced draft air cooler also simplifies future plant expansion by providing direct access to bundle for replacement. Structural disassembly is not required. The second most economical and most common style air cooler is the induced draft ACHE. This design uses axial fans to pull air across the fin tube bundle. The fans are positioned above the bundle thus offering greater control of the process fluid and bundle protection due to the additional structure. Lower noise levels at grade are another benefit. The induced draft air cooler does require some structural disassembly if bundle replacement is required. Types of Finned Tubes:   Finned Tubes are most important part of the Heat exchanger which affect the efficiency of the Air Cooled Heat Exchanger. Below mentioned some types of Finned Tubes manufactured by us.   For more Types of Finned Tubes, visit Finned Tube Heat Exchanger page. TUBE MATERIALS INCLUDE:   Carbon Steel, Seamless, and Welded Stainless Steels, Seamless, and Welded 2205 Duplex Copper, Copper Nickel, Admiralty Brass Titanium

• Brand Name: JC Brand

dear sirmadam, greetings for the day… we jc equipments pvt ltd take pleasure to introduce ourselves as one of the leading designers, manufacturers & exporting of all kind of cooling towers,heat exchangers, Frp Seemless Cooling Tower, pressure vessels columns, storage tanks, air cooled condensers, etc... in india. jc equipments pvt ltd started in the year of 1989. we have wide knowledge in this field and we have regular customers throughout the world. we are authorized manufacturers of asme and we have “u, s & r” stamp certification also. we are corporate member of cti, usa. we are a world class manufacturers and we never compromise in quality. we assure our product will be best quality and competitive price. herewith we have enclosed the product profile for your kind reference. kindly refer the attachment. looking forward your valuable enquiry for us to quote our best and competitive offers, with assuring you of our best quality and prompt service at all times.

Closed Circuit Cooling Tower operate in a manner simillar to open cooling tower except that the heat load to be rejected is transfered from the process fulid to the ambient air through a heat exchange oil. The coil serves to isolate the process fluid from the outside air, keeping it clean and contaminate free in a closed loop. This creates two separate fluid circuits.     a external circuit, in which spray water circulates over the coll and mixes with the out side, an internal circuit, in which the process field circulates inside the coil. During operation, heat is transfered from the internal circuit, through the coil to the spray water, and then to the atmosphere as a portion of the water, and then to the atmosphere as a portion of the water evaporates. During the time of shortage of cold water supply we have to go forClosed Circuit Cooling Tower. The cooling water is circulates in a close loop consisting tower unit. We may add some percent of the cooling water from the available water resources to the closed circuit cooling system and we can reduce the cooling tower size. Mixing ration means the percentage of the added water. If our mixing ratio is zero, it is called completely closed system. When the mixing ratio is 100%, it is called an open system. Closed Circuit Cooling Tower are suitable for Thermal Power Plant for more information about Closed Circuit Cooling Tower send mail to jc@thecoolingtowers.com.  

The Flue Gas Air Pre Heater station air is generally totally dry air is required for the instrumentation, so the air used to drive the rotor is injected with oil to lubricate the air motor. Flue Gas Air Pre Heater and circumferential seal plates are also provided to avoid leakages of gases or air between the sectors or between the duct and the casing while in rotation. The Flue Gas Air Pre Heaters are in the sector housings provided on the rotor and are renewable. Flue Gas Air Pre Heater are provided for viewing the preheater's internal operation under all operating conditions. Flue Gas Air Pre Heater is connected for emptying along with the main dust hoppers of the dust collectors.

• Brand Name: gireesh

We are offering closed circuit cooling towers, gireesh closed circuit cooling tower closed circuit cooling towers operate in a manner similar to open cooling towers, except that the heat load to be rejected is transferred from the process fluid (the fluid being cooled) to the ambient air through a heat exchange coil. The coil serves to isolate the process fluid from the outside air, keeping it clean and contaminate free in a closed loop. This creates two separate fluid circuits: principle of operation (1) an external circuit, in which spray water circulates over the coil and mixes with the outside air (2) an internal circuit, in which the process fluid circulates inside the coil. during operation, heat is transferred from the internal circuit, through the coil to the spray water, and then to the atmosphere as a portion of the water evaporates.

Adiabatic Cooling Tower unit built thus on scale back the body of water air temperature to the coil. This provides the shoppers with important reductions within the price|cost of capital opportunity cost of the cooler further as reductions within the cost of power consumption. associate electronic temperature controller is employed to regulate the fluid (process water) temperature inside rigorous tolerances. This temperature controller pulses the sprays of water onto the cooling pads to relinquish solely the minimum of adiabatic cooling of the body of water air needed for any given load and close condition.All style options area unit in to produce a protracted product life.  

We manufacturer of Fixed Tube Sheet heat exchanger in India as per your requirement and as per the market standards. This JC FIxed Tube Sheet heat exchanger is useful for hight pressure and high temperature based applications. Also for chemical industries and all refinery units are using our Fixed Tube shee heat exchanger. This type of heat exchanger is employed where even slightest intermixing of fluids can not be tolerated. The inside tube sheets are fixed as its name implied.

Marine heat exchangers are the most common way to cool a boat’s engine, using the lake, river or ocean water in which the boat floats. Since this water may be corrosive the engine may be cooled by a sealed mixture of distilled water and antifreeze. Heat from the water-antifreeze mixture is then transferred to the ocean (or lake or river) water which flows into a heat exchanger. The water-antifreeze mixture runs through the heat exchanger dumping heat, but remaining separate from corrosive salts and chemicals found in the water the boat is floating in. If the ocean water eventually corrodes and ruins the heat exchanger it can be replaced at a fraction of the cost of replacing the engine. To protect the marine heat exchanger from corrosive salts, a sacrificial zinc anode is screwed into the heat exchanger. This anode must be periodically replaced as part of regular maintenance. Because the water the boat floats in may be contaminated with floating particles such as wood or styrofoam balls the well designed boat will have a filter (often stainless steel mesh) to remove these particles before they are moved toward the heat exchanger. This filter must be periodically cleaned or else the flow of water to the heat exchanger will become obstructed and the engine will overheat.   Marine Uses:- A water-jacketed exhaust manifold is necessary on marine engines to reduce the temperature of the engine-room air space and the exhaust pipe. If the exhaust manifold is in the sea-water circuit it should be installed with the sea-water inlet at the back and the outlet at the front on the top to ensure that it operates completely full of sea-water. If the manifold is in the fresh-water circuit a small by-pass hole must be provided in the thermostat to ensure that some water is circulating through the manifold at ail times. Our development is to combine a water jacketed exhaust manifold with the heat exchanger and header tank. This arrangement is particularly suitable for small series-produced engines; the manifold is cooled by fresh water and as a result a keel-cooled engine can be made by omitting the heat exchanger tube stack and the sea-water pump. On installation the fresh-water outlet from the manifold would be connected to the keel pipes and the return taken back to the engine fresh-water pump. Heat exchanger/manifold assemblies are heavier than ordinary marine manifolds and must therefore be supported on the underside using the fixing lugs provided. When automotive engines are being converted for marine use the existing centrifugal-type pump should be retained for the fresh-water circuit and an additional pump fitted for the sea-water circuit. The sea water pipe bore should be chosen so that the velocity does not exceed 2 m/sec on the suction side and 3 m/sec on the discharge side of the pump. Specifications : Large ships usually carry evaporating plants to produce fresh water, thus reducing their reliance on shore-based supplies. Steam ships must be able to produce high quality distillate in order to maintain boiler-water levels. Diesel engined ships often utilise waste heat as an energy source for producing fresh water. In this system, the engine cooling water is passed through a heat exchanger, where it is cooled by concentrated sea water. Because the cooling water (which is chemically treated fresh water) is at a temperature of 70-80 degrees C, it would not be possible to flash off any water vapour unless the pressure in the heat exhanger vessel was dropped. Partial evaporation is achieved and the vapour passes through a demister before reaching the condenser section. Sea water is pumped through the condenser section to cool the vapour sufficiently to precipitate it. Applications : The distillate gathers in a tray, from where it is pumped to the storage tanks. A Salinometer monitors salt content and diverts the flow of distillate from the storage tanks if the salt content exceeds the alarm limit. Sterilisation is carried out after the evaporator. Evaporators are usually of the shell-and-tube type (known as an Atlas Plant or of the Plate Type such as the type designed by Alfa Laval. Temperature, production and vacuum are controlled by regulating the system valves. Sea water temperature can interfere with production, as can fluctuations in engine load. For this reason, the evaporator is adjusted as seawater temperature changes, and shut down altogether when the ship is manoeuvring. Advantages : An alternative in some vessels, such as naval ships and passenger ships, is the use of the Reverse Osmosis principle for fresh water production instead of evaporators. If the engine is being used to drive auxiliary equipment in a ship and the sea water supply is taken from the ship’s main, ensure that the recommended flow rate cannot be exceeded. To alleviate this problem, a brine-air ejector venturi is used to create a vacuum inside the vessel.

We are recognized as one of the foremost Industrial Tube Bundle Heat Exchanger Manufacturers, based in India. Using quality raw materials, we have developed our Tube Bundle Heat Exchanger that finds uses in various industrial applications. It is available in various grades and specifications. High tensile strength, long functional life, consistent performance, and anti-corrosive properties are some of the significant features of our Tube Bundle Heat Exchanger. Consequently, our Double Tube Bundle Heat Exchanger is high on demand in national as well as international markets.

The Round Shape FRP Cooling Tower may call as Bottle Shape . The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The JC FRP Bottle shape Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor 'Minimum drift Losses'. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption. Specifications of Bottle Shape FRP Cooling Tower The Ranges are from 10 TR to 10000 TR. Send your requirement to get our best free quote 1. Water flow rate, 2. Hot water Inlet temperature, 3. Required cold water Outlet 4. temperature and 5. Wetbulb temperature

We are manufacturing and exporting a wide range of heat exchangers suitable for heat transfer fluids, lubricating oil, power pack oil and other process coolants. Three types of shell and tube heat exchangers namely fixed tube sheet type, removable bundle type and u-tube type. Fixed type heat exchangers are used where there are absolutely no chances for inter mixing of two fluids. In this type, the tube sheets are completely welded to the shell and acted as shell flanges. The floating type heat exchangers has the advantages of removability of tube bundle and access for cleaning both inner and outer side of tubes and shell. We provide well conceived optimum designs to suit every application of heat exchange and recovery of for captive consumption and o.e. Applications. The materials of construction used are copper, stainless steel, mild steel, brass and cupro - nickel. Heat exchangers for sea water marine application or with steels shells are also offered & designed as per customer specific requirements. Advantages 1. attachment of tubes to single tubesheet eliminates the need for differential expansion joint. 2. this type is suitable for high pressure. 3. high degree of protection from leakage is possible. 4. double tubesheet is possible to provide further protection from leakage.

• Material: FRP
• Features: Spray type cooling, Well developed, Best material used, Easy to install

• Materials: Copper,Carbon steel,stainless Steel

• Size: 4 inch
• Inlet Temperature: 260 Degree Celsius
• Country of Origin: Made in India
• Surface Finish: Polished

The primary function of a Heat Exchanger is to efficiently transfer heat from one medium to another. We are the Manufacturer and Supplier of excellent quality Heat Exchanger that is precisely manufactured by using the best quality raw materials. These Heat Exchangers are designed by using the latest metal forming and cutting equipments that produces the best exchangers. Our Heat Exchangers are fabricated from different materials like carbon steel, aluminum bronze, stainless steel, naval brass, nickel and cupronickel. Features : Lower vibration riskImproved two-phase flow distributionReduced shellside foulingLower shellside pressure drop Uses : Separation of air gasesHydrocarbon processingNatural gas liquefactionIndustrial gas liquefaction

We have with us a comprehensive range of water cooled after cooler, which is manufactured in line with the prevailing industry standards. Our range is highly demanded in the market for because of lower air temperature and removal of moisture removal. These compressed air water cooled after coolers are suitable to be used in places where water is hard or there is other constraints on availability of soft cooling water.   We are the leading manufacture in water cooled aftercooler  & also supplier in tamilnadu(chennai, coimatore, trichy , madurai, salem, erode, thirunelveli, ) kerela( cochin, thiruvanathapuram, palghat, calicut, karnataka, andhrapardesh

We can make timely delivery of bulk as well as retail orders courtesy a wide vendor, distributor and logistic service provider base. One of the leading companies based in Tamil Nadu(India), we are a known for the exceptional assortment of products.

• Type: Panel Cooler
• Material: Metal
• Certification: ISO Certification
• Application: Air Cooling
• Weight: 20-40Kg, 40-80Kg
• Color: RAL 7035
• Voltage: 220V, 380V
• Condition: New
• Power Type: Single Phase, Three Phase
• Frequency: 50Hz
• Automatic Grade: Automatic, Semi Automatic
• Power: 1-3kw, 3-6kw
• Warranty: 1year
• Country of Origin: India
• Brand Name: Dewsat
• After-Sales Service Provided: Yes
• Product Name: Panel Air conditioner
• MOQ: Powder coated CRCA

• Features: Robust Construction, Controlled Combustion, High efficiency through heat recovery, Less Oil Consumption, Easy operation and low maintenance

We are Supplier of this product.

A double pipe heat exchanger is one of the simplest form of Shell and Tube Heat Exchangers. Here, just one pipe inside another larger pipe. To make an Unit very Compact, The Arrangement is made Multiple Times and Continues Serial and Parallel flow. One fluid flows through the inside pipe and the other flows through the annulus between the two pipes. The wall of the inner pipe is the heat transfer surface.This is also called as a hairpin heat exchanger. These are may have only one inside pipe, or it may have multiple inside tubes, but it will always have the doubling back feature shown. In some of the Special Cases the Fins also Used in Tube side.

Spiral Plate Heat Exchanger, wood splitter, Hydraulic wood splitter

• Type: Cooling Tower
• Material: FRP, RCC, Wooden
• Weight: 0-100kg, 100-200kg, 200-300kg
• Color: Blue, Light White
• Voltage: 110V, 220V, 380V, 440V.580V
• Condition: New
• Automatic Grade: Automatic, Manual
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Country of Origin: India
• Brand Name: Welltech Cooling Systems