Hose Pipes Dealers in Town Hall, Coimbatore

• Type: Gas Tubes
• Length: 1-1000mm, 1000-2000mm, 2000-3000mm
• Color: Brown, Grey, Silver, Green, Blue, Black
• Condition: Rectangular, Round
• Feature: Durable, Easy To Use, Optimum Quality, Rust Proof, Supreme Finish

We are the main supplier of this product.

TNT Pipes Dealers in Coimbatore. TamilNadu_Steel_Tubes and Pipes basically cater to the needs of Agriculture and Industry for conveyance of Water, Oil and Gas, for structural Fabrications and for scaffolding as well. Khandelwal Steel Tubes - Coimbatore Call Us Now & Get Free Estimates!!! : 9843344162

Made from high-tensile strength spring steel. STAY-PUT Coolant Nozzles convey soluble oils and cutting fluids through unrestricted full bore tubing. Hollow cone spray pattern, uniform distribution with fine atomization even al low pressure.       ADJUSTABLE COOLANT HOSE INTRODUCTION   Length and angle can be freely adjusted, suitable for most fluids (liquids and gases), hose orifice can be changed as needed. Can be used for air or for water/oil supply to metal processing machinery. Adjustable Coolant hose is highly pliable; it holds its shape well and will not spring back. Bending hose will not reduce inner diameter; hose will not pinch or fatigue. Adjustable Coolant hose will not damage cutting blades if there is accidental contact. Adjustable Coolant hose does not conduct electricity and is suitable for use on electrical discharge (EDM) machines. Four kinds of orifice inner diameter are available: 1/4", 3/8", ½", ¾" Adjustable Coolant hose is designed for the transport of low-pressure fluids.

• Color: Black
• Features: Supreme strength, Easy installation, Efficient working
• Temperature: -40 to +100 deg C
• Length: 1-2 m
• Size: 1/4" to 4"

• Driven Type: Hydraulic, Electric
• Pipe Material: Hydraulic rubber
• Color: Black
• Condition: New
• Automatic Grade: Semi Automatic
• Power: 1-3kw
• Application: Oil
• Certification: Hydraulic Industry
• Feature: Last long
• Voltage: 440V
• Type: Hydraulic Crmping Machine
• Weight: 200-300kg
• Warranty: 2years
• After-Sales Service Provided: Pakka
• Country of Origin: India
• MODEL NAME GM 342: LP MACHINE
• CRIMPING RANGE: 1/4'' up to 2 ''

Oil seals, also known as shaft seals, are radial lip type seals which are primarily used for retaining lubricants in equipment having rotating, reciprocating or oscillating shafts. The rotating shaft application is most common. An oil seal normally consists of three basic components: the sealing element, the metal case and the spring MATERIAL: NBR , VITON(FKM) , SILICON

• Material: PVC
• Type: WATER HOSE
• Country of Origin: Made in India
• Usage/Application: Construction
• Size/ Diameter: 3/4 TO 8 inch
• Length of Pipe: 30 METRE

pvc plastic garden hose

• Temperature: -40°C to +90°C (Short term 125°C)

Hose wall made of ether grade (microbes and hydrolysis resistant) abrasion resistant Polyurethane (wall thickness between the spiral 0.4mm) with copper coated spring steel wire reinforcement. A very light and extremely flexible hose with good tensile strength and ultimate elongation. shore A ~85. Free of softeners, halogen and cadmium free and produced in line with FDA regulations. Hoses up to 90mm ID comes in roll form, whereas hoses from 100mm ID and above comes in compressed form for the sake of cost effective transportation. As the same is compressed after production, the hose will not retain the original measurement afterwards. Hence you may measure the same after fully elongating under pressure or go on counting rings as 1 Meter =41/42 rings for measurement purpose or use. The advantage of hose in compressed form is that the same can be ideally used between moving parts like CNC router etc as the hose behaves like a spring during onward and backward movements.

• Material: PVC
• Type: Spray Hose Pipe
• Country of Origin: Made in India
• Size/Diameter: 1''-2''
• Length of Pipe: 20m-30m
• Pattern: BRAIDED HOSE

• Hardness: 60
• Working Pressure: 3
• Nominal Size: 3/4 inch
• Thickness: 1mm-4mm

• Color: Red and Blue
• Packaging Type: Box
• Working Pressure: 25 Kg/sqcm
• Usage: Gas
• Size/Diameter: 8 mm

• Material: Plastic
• Usage: Spinning

• Features: Corrosion resistance, Robust design, High strength

• Type: Teflon Hoses
• Material: Plastic, Rubber, Steel
• Shape: Round
• Color: Black, Green, Red, White
• Thickness: 1-5mm, 10-15mm, 15-20mm, 5-10mm
• Length: 10-20mm, 20-30mm
• Application: Chemical, Gas
• Feature: Crack Proof, Durable Nature, Easy To Fit, Flexible, Optimum Quality

wire reinforced lpg rubber hose 8mm id,15mm od, orange and black colour, packing as per requirement,resistance to abrasion,weather and liquefied petroleum. work pressure:1.o mpa,test pressure:2 mpa,burst pressure:5 mpa

• Temperature: -40°C to +155°C

Application  Medium pressure cleaner line up to 650 bar. For use with water basedfluids in washer and cleaner systems.Safety factor for the mentionedworking pressures 1:2.5, according to EN ISO 7751. Standards  EN853- 2SN exceeds SAE J517 – 100 R2 ConstructionLining :Oil and water resistant Synthetic rubber Reinforcement:Double steel wire braid Cover:Oil, weather, Ozone, and abrasion resistant Synthetic rubber

Leading Manufacturer and Exporter of Braided Hoses such as Braided Hose and Nylon Braided Hoses from Coimbatore.

RRL Hose Pipe, Fire Extinguisher, Co2 Type Fire Extinguisher

We are offering single lip with a garter spring , dual lip with spring, single lip without spring , dual lip without spring , metal oil seals. Material: nbr , viton(fkm) , silicon.

industrial rods tubes, Brass Pipes, Metal Products, industrial rods

suraksha hose, Lpg Stove, LPG Products

Stainless Steel Hoses, Hydraulic Hoses, Rubber Hoses, Rubber Sheets

Washing Machines, Electronics Products, Air Conditioners

Pvc Pipe, Paint, Ms Pipe, HDPE Pipe, Pipe Fittings, rcc pipe

jeton coolant hoses, rolon chain, stainless steel compression fittings

Gas Welding Hose, PVC Pipes, Pipes, Suction Hose, black hose, krishi hose

Hydraulic Hoses, Cast Iron Fittings, Stainless Steel Fittings, Abrasives

Wash Down Hose