Iceberg Climate Technologies Ganapathi, Coimbatore, Tamil Nadu

Air-cooled Water Chiller   Refrigerant R-134A (CFC Free), R-407C (CFC Free) & R-22  Capacity from 5 TR to 150 TR. Liquid Temperatures from Plus 7 to Plus 18 degC, Mono & multiple Independent circuit design with Hermetic scroll, semi hermetic reciprocating and screw.   1. An optional of air-cooled and water cooled. 2. Remote air cooled condenser is an option. 3. Above 150 TR in single skid is an option.   Application: Process and equipment cooling, closed loop or open fluid circuit

Walk - in Freezer is small facility to keep the frozen perishable foods for long duration without compromise the quality, easy to locate, load and unload. Walk-ins are constructed of prefab, precision formed, modular PUF [120, 150 & 200mm] panels for an accurate fit and can be located inside or outside of the facility, on existing floors or prefabricated flooring. Comes complete with a plug in single or three phase refrigeration [split or unitary] unit.

Walk - in Freezer is small facility to keep the frozen perishable foods for long duration without compromise the quality, easy to locate, load and unload. Walk-ins are constructed of prefab, precision formed, modular PUF [120, 150 & 200mm] panels for an accurate fit and can be located inside or outside of the facility, on existing floors or prefabricated flooring. Comes complete with a plug in single or three phase refrigeration [split or unitary] unit.

a walk-in is large enough to accommodate the storage of perishable foods while making foods easy to locate, load and unload. Walk-ins are constructed of prefab, precision formed, modular puf [100,120 & 150mm] panels for an accurate fit and can be located inside or outside of the facility, on existing floors or prefabricated flooring. Comes complete with a plug in single or three phase refrigeration [split or unitary] unit.

a “step-in-refrigerator” is a utility to preserve value added & chilled food stuffs, medicines seeds flower buds & precision metals. It comes with the capacity of 5000, 6000 & 7000 litres and incorporated with unitary (or) split type, eutectic (or) ordinary conventional refrigeration system

in general, outside air is drawn through the air intake by the air handling unit (ahu). once in the system, supply air is filtered to remove particulate matter (mold, allergens, and dust), heated or cooled, and then circulated throughout the required space via the air distribution system, which is typically a system of supply ducts and diffusers.   the air distribution system also includes a return air system so that conditioned supply air is returned to the ahu where it is mixed with supply air, re-filtered, re-conditioned, and re-circulated throughout the space. This is usually accomplished by drawing air from the occupied space and returning it to the ahu by return air ducts.   the process of cooling and heating to condition the drawn air by refrigerating machine and heating grids with the capacity range of 1000 cfm 10,000 cfm   functions and options   providing supply of fresh air which is filtered by suitable and qualified filter grid (0.3 to 20 mic).   1.   the filter section consists of box filters which are fixed in a frame with rapid fasteners allowing them to be replaced quickly and easily. 2. standard, classified air filter system is an optional for appropriate application. 3. oxygen demand control unit is an optional 4.   the refrigerating unit supplied with cfc free refrigerant, hematic scroll, semihermatic reciprocating compressors and as of split or packaged air-cooled based on capacity. 5. heating grid consists of an electric spiro-fin, mono or multi row heaters as required.

Milk Cooling and Storage   Milk coolers set the world quality standard. Dependable and durable, you can count on years of trouble-free performance, the lowest operating costs, precise temperature control, and a wide range of standard features and options.   Standard Components   Milk coolers are built of polished stainless steel for durability and ease of cleaning. They feature double-wall construction to maintain temperature and they utilize our exclusive Chill-Plate heat transfer surface for maximum cooling power and low energy costs.   Available from 500 to 5,000Litres to suit the needs of large and small operations, the milk coolers also come standard with heavy-duty agitators. They can be adapted to your operational needs with the refrigeration and control systems providing the most suitable range of features.   Features and Benefits   1. Stainless Steel Construction   Highly polished, Type 304 stainless steel construction provides durability and clean ability in an attractive finish. 2. Exclusive Design   Inner liner jacketed with exclusive Chill-Plate heat transfer surface maximizes refrigeration efficiency. 3. Double-Wall Construction   Insulated double-wall construction maintains high thermal storage efficiency.

Isothermal humidifier for steam production, the steam is produced from the water contained cylinder (connected to the mains). The water boils and evaporates due to the electric current generated by two immersed electrodes in the cylinder.

  Isothermal humidifier for steam production, the steam is produced from the water contained cylinder (connected to the mains). The water boils and evaporates due to the electric current generated by two immersed electrodes in the cylinder.   1. The full range features 5 models, rated from 1.5 to 45 kg/h (3.3 to 100 lbs. /hr.). 2. Each capable of modulating the steam flow from 20% of the rated flow to 100%, according to the external demand. 3. Smaller and special compact unit is available when space is a real concern (max 3 kg/h / 6.6 lbs. /hr., 230 Vac 1-phases). 4. The Electrode steam humidifier  is reduced dimensions, installation easiness and flexibility flexibility. 5.   Control electronic is separated and can be installed inside of an electrical panel. It is available without display / integrated or remote display (the display can be separated with an optional kit). 6.   The kit contains the unit of reduced dimension with drain pump, solenoid valve and interconnection hoses, one cylinder and one control electronic board. 7. This type is particularly suitable for air handling units.

Manufactured in many sizes from 30,000 to 12, 00,000 BTU, gas or oil fired models. These heaters are recommended for low temperature types of supply water heating applications requiring temperatures up to 190F. They are also used for combination closed system supply water heating applications. Efficient water to water heating using built in copper heat exchangers, Stainless steel heat exchangers are available in these units. The Indirect Fired Water Heater is an industrial quality unit designed for economically heating large volumes of domestic or process water for commercial and industrial applications. The all bronze and copper heat transfer coil eliminates the possibility of rust throughout the water passages. The indirect principle of heating the process water with sealed-in primary water combined with controlled circulation minimizes the possibility of scaling within the heat transfer coil. We are well experienced in Glygol heating system also. 1. The Indirect Hot Water heaters 30M to 1200M BTU for heating water from 80° F to 190° F, atmospheric fired 2. Also great for Swimming Pools, Heat Pump Applications, Anaerobic Digester or Sludge Heating. 3. Indoor models only.

Water Cooled Brine Screw Chiller   Semi hermetic screw compressor with auto-capacity control.  Refrigerant R-404A / 507A (CFC Free), R-22 and NH3.  Liquid Temperature from Minus 5 to Minus 50 degC Capacity from 15 TR to 250 TR in single and two stage design.   1. An optional of air-cooled and water cooled. 2. Remote air cooled condenser is an option. 3. Above 250 TR in single skid is an option.   Application: Industrial process cooling and indirect cooling system for frozen storage and freezing system.

It is a structure which is built, insulated, and refrigerated to maintain a specific temperature for the storage of packed frozen food products for long duration or until they are to be sold. These bulk storages are field erected of PUF panels [120mm to 200mm thick] and required refrigeration[Stand alone or centralized]systems.

Indirect Fired Water Heaters     Manufactured in many sizes from 30,000 to 12, 00,000 BTU, gas or oil fired models. These heaters are recommended for low temperature types of supply water heating applications requiring temperatures up to 190F. They are also used for combination closed system / supply water heating applications. Efficient water to water heating using built in copper heat exchangers, Stainless steel heat exchangers are available in these units.     The Indirect Fired Water Heater is an industrial quality unit designed for economically heating large volumes of domestic or process water for commercial and industrial applications. The all bronze and copper heat transfer coil eliminates the possibility of rust throughout the water passages. The indirect principle of heating the process water with sealed-in primary water combined with controlled circulation minimizes the possibility of scaling within the heat transfer coil. We are well experienced in Glygol heating system also.   1.   The Indirect Hot Water heaters 30M to 1200M BTU for heating water from 80° F to 190° F, atmospheric fired 2.   Also great for Swimming Pools, Heat Pump Applications, Anaerobic Digester or Sludge Heating. 3. Indoor models only.

Eutectic system stores up to one or two day’s refrigeration requirements in advance, usually involving only one or two long run periods per day. Cabinet temperatures are sustained by the eutectic mass to keep the chilled & frozen products in its storage temperature even long [10 to 12 hrs.]Power failure. Other refrigeration types having virtually no similar hold-over ability have to cycle once or twice per hour on demand, therefore consuming more power. These eutectic systems are supplied with AC or DC refrigerating units   As an example, using a quantity of water as a eutectic solution and knowing that water's phase change occurs at approximately 0°c, this water will absorb and dissipate 80* (Yes eighty!) times as much thermal energy while freezing and thawing as it would for any other rise or fall of a degree centigrade. This phenomenon called 'Latent heat', multiplies the eutectic's thermal storage capacity many times providing huge hold-over periods where the unit stays off for many hours even days in cooler times.

Air handling unit manufacturing system that is designed to provide fresh, filtered and conditioned air to the process or workplace. It is customized in a variety of configurations to suit the particular application.   It is manufactured from a galvanised steel frame construction. Doors, floor and side walls are made of double skinned aluminium or PCGI sheet filled with 40mm thick (PUF or EPS) insulation. EPDM seals are applied all round the unit.     Fresh air is drawn into the unit via a centrifugal fan through a rain proof, drip-proof inflow cowl and a filter grid based on Oxygen demand.     Functions and options   1.   Providing supply of fresh air which is filtered by suitable and qualified filter grid (0.3 to 20 mic) and discharged. 2.   The filter section consists of bag or box filters which are fixed in a frame with rapid fasteners allowing them to be replaced from the front, quickly and easily. 3. Standard, Classified Air filter system is an optional for appropriate application. 4. Oxygen demand is measured by CO2 sensor and replenished by centrifugal fan with VFD. 5. Heating of the inlet air with an Electric Spiro-fin heater grid 6. Cooling of the inlet air with multi row Cu-Alu finned cooling coil.

Air handling unit manufacturing system that is designed to provide fresh, filtered and conditioned air to the process or workplace. It is customized in a variety of configurations to suit the particular application. It is manufactured from a galvanised steel frame construction. Doors, floor and side walls are made of double skinned aluminium or PCGI sheet filled with 40mm thick (PUF or EPS) insulation. EPDM seals are applied all round the unit. Fresh air is drawn into the unit via a centrifugal fan through a rain proof, drip-proof inflow cowl and a filter grid based on Oxygen demand.

It is a structure which is built, insulated, and refrigerated to maintain a specific temperature for the storage of harvested, perishable crops like Apples, citrus, onions, potatoes, spices and food grains as bulk for long duration or until they are to be sold. These bulk storages are field erected of PUF panels [80mm to 150mm thick] and required refrigeration[Stand alone or centralized]& humidification systems.

we have specialised knowledge and experience in air handling equipment for producing the most cost effective and energy efficient system for heating with ventilating today's modern factory buildings and process air heating system. We design and manufacture the right equipment to suit any given application like warehouses, food process and any customized requirement.   this extensive range of high quality, high performance, and low cost warm air heaters offers an efficient solution to a wide range of commercial and industrial applications. There is a choice of wide range of outputs that can match any heating requirement, varying from 15kw right through to 800kw heat output. The units can be specified for either free blowing or ducted operations and therefore offer complete flexibility of installation.   1.indirect  oil, lpg fired and electric units 2.internal & external models 3. Airflow rate up to 36m³/s 4.heat output above 800kw with dual skid as an option 5.air pressure up to 2500pa 6.stainless steel high efficiency heat exchanger 7. Standard, classified air filter system is an optional for appropriate application.

Blast freezing (or) air-blast freezing is among the most commonly used freezing techniques due to temperature stability and production versatility. Air blast freezers are not readily available off the shelf as packaged units. They usually have to be tailor-made to suit individual requirements. Freezing is accomplished through keep the packaged food into a freezing cabin, fans inside the freeze tunnel blow extremely cold air with high velocity around the packaged food, as a result of the extremely low air temperature exposure, the food freezes rapidly with product inner core temperature of -18 to -20degC.

the air blast chiller provides critical temperature control during conventional food preparation. The blast chiller is more efficient in cooling foods than the standard storage refrigerator. Time and temperature relationships are critical to the growth and spread of contamination, contributing to sensory-quality and safety loss in foods. The air blast chiller provides critical temperature control during conventional food preparation. The blast chiller is more efficient in cooling foods than the standard storage refrigerator. The blast chillier offering greater heat removal capacity and utilizing high-velocity, convicted air directed through the product zone to promote fast, even cooling of foods. The rapid temperature pull-down accomplished by these systems proved to extend safe storage life and improved the quality of the food.

High pressure misting system [70 to 120 bars] moistening space up to 99% and cooling down to wet bulb thermometer temperature. Water mist particles. Water mist particles (

High pressure misting system [70 to 120 bars] moistening space up to 99% and cooling down to wet bulb thermometer temperature. Water mist particles (