Industrial Furnace Dealers in Karumathampatti, Coimbatore

We are offering gas burner. 1562 gas burners are designed to give maintenance free operation using heavy oil, light oil, or gas. There are no “superfluities” on this burner – it has a heavy cast iron body of clean design that avoids clogging even when used on tough jobs such as forge furnaces fired with heavy oil. burners competency the total air capacity of the burners is listed under list 1 for single blower supplying at 20”wg combustion air and 22”wg atomizing air for light oil operation and 22”wg combustion air and 38”wg atomizing air for heavy furnace oil operation. Use list ii and iii when selecting separate blowers for combustion and atomizing air. For sizing blowers or burners at other pressures, add figures from the list ii and iii to get total capacity. capacities shown in list ii is for operation on gas with the air shuttled closed. On oil operation these capacities are increased 20% the additional air supplied through the atomizing air connection. When burning either gas or oil with the shutter open, burner capacities may be doubles if furnaces conditions assure sufficient secondly air. function of the burner oil with a viscosity of 70 to 90 seconds redwood I and a pressure between 25 and 30 psi, should be supplied to an air/oil ratio controller which will deliver oil to the burner at a pressure proportional to the main at all firing rates. The atomizing air pressure at the burner may be as low as 21”wg when using distillate oil, 38”wg when using heavy oil. the 1562 burners can be operating on any gas of 2000 to 12800 kcal per cu.ft heating value. Switching from gas to oil operation or oil gas may be done quickly without furnace shutdown, simply by turning off one fuel valve and opening the order. burner assembly the heavy cast iron body can stand much abuse. All internal parts of the 1562 burner are machined. The smooth surfaces stay free of oil deposits and dirt, thus greatly minimizing the need for cleaning oil is, put though the burner in a straight passage having a large cross-sectional area permitting visual inspection for clogging and easy cleanout if necessary. The burner oil valve is a non-plugging v-port oil valve which produces small and uniform flow rate changes throughout the 180°c sweep of the control handle. list 1. Air capacities in cfh burner designation 1562-3a 1562-4a 1562-5a air pressures at burner combustion 24”wg; atomizing 28”wg 4735 5935 10630 combustion 40”wg; atomizing 44”wg 6320 7670 13640 model no: 1562 size: 3 – 7a firing rate: 8 kg to 80 kg/hr (lpg) technical name: gas burner, natural gas burner, lpg burner, biogas burner, methane burner, producer gas burner. where can be used: heat treatment furnace, direct melting, aluminium melting, bale out furnace, non-ferrous melting. Tilting furnace, rotary furnace, reverbaratory furnace, salt bath furnace, re-heating furnace, ingot furnace, rolling mill, pre-heating burner. product description: a burner made with ci body has a primary and secondary air ports, supplied with air butterfly valves, burner block, precise control oil valve (sov) as a package. Burner is used in the applications, where fuel will be diesel, lpg, natural gas, producer gas etc.,this burner is specially designed to avoid localized heating. It is designed to give 100% combustion efficiency even with high carbon oil. advantages: fuel efficient by better atomization uniform heat transfer, 10% savings will be possible by interchanging with any make burner. specialties: manual operating burner, automatic burner, air/fuel ratio regulating system, mass flow control system, pressure balancing system. optional accessories: preheated combustion air upto temperature of 350◦c (max) for fuel saving upto 40%. allied products: burner block, sensitrol oil valve, precise control valve, screwed type butterfly valve, primary air control valve, secondary control valve, air/oil ratio regulator, zone control valve, pilot ignition system, uv flame sensor, pumping & heating unit, centrifugal air blower, temperature controlled burner.

Electric Furnace, Centrifugal Air Blower, pumping heating unit, Pumping Unit