Industrial Pump Dealers in Appanaickenpalayam, Coimbatore (41 products available)

Name : RMP COMPRESSORS

Brand Name : Schumak

Type : Type

Output : 5 gm/stroke

Working Media : Grease

Container Capacity : 20 Kg

Hose Type : 1/4"-100 R2

Hose Length : 2.2 m

We are offering sea water pump. Body material: closed grain cast iron. Impeller: gunmetal. Shaft: stainless steel. Seal: graphite and mechanical. Bearings: two ball bearings. Pulley: 3" b type (double groove). constructed from high quality alloys cast and stainless steel shaft for ruggedness and reliability. resist corrosion due to sea water. easy to service and maintain. more abrasive wear. no clogging on hard or soft solids. no air-locking problems. Specification flow rate: 5.5lsecond, variable speeds, self priming. Weight: 25 kg inputoutput bsp: 1 ½ “x 1 ½ “

Power Source : Electric

Material : Plastic

Model Name/Number : Sololift2

Usage/Application : Domestic

Pump Type : Waste Water Pump

Brand : Grundfos

Automation Grade : Automatic

Rated Current : 3 A

Gross Weight : 9.27 kg

Power Input : 620 W

Maximum Speed : 2800  rpm

Rated Voltage : 220- 240 V

Enclosure class  : IP44

Length of Cable : 1.2 m

Country of Origin : India

Type : Solar Water Pumping System

Condition : New

Warranty : 2years

Brand Name : GLOSUN

Application : Outdoor

Power : 5 HP

 Available Models: 1HP 3HP Features: Powered by AC & DC Double Shielded Brushless Magnetic Motor. Solar BLDC Pump Efficiency 95%. SS Industrial Grade Body. Easy Installation and Maintanence. Dry run, Reverse and Overload Protection. Pump ON/OFF Control and Monitoring App.

Power Supply : AC 230 Volts 50Hz power supply

Motor Hp : 0.5 hp & 1.0 Hp

Pump Size : 1” x 1”

Max head : Up to 46 meters

Discharge : up to 65 LPM

A cute , multi utility submersible pump. Designed for DIY (Do it yourself) concept. Pre assembled, pre coolant filled pump makes the pumps easy for installation. Just join a hose along with a nylon rope,join required length of cable and install it without ny installing gear like chain pulley block, tripod & Etc.   APPLICATION: Suitable pumping water from 4” bore wells and shallow wells Small building and gardens Can replace Conventional Jet pumps  FEATURES: Head up to 170 feet depth Discharge up to 100 LPM Factory assembled and coupled motor and pumps makes installation easy. High starting torque and works without starting capacitor Factory filled coolant water with special additive to cool the winding and lubricate the bearings Saves 60% power compared to Jet pump SS 304 grade Motor and pump Body. Noise less silent operation Saves Floor space occupied by a jet pump SPECIFICATION

Power : 0.5 HP to 3.0 HP, 1Phase, 220 V, 50Hz

Head range : upto 25m

Delivery size : 50 mm to 75 mm

1.0 HP to 3.0 HP, 3Phase, 380 V, 50Hz : Speed

2850 rpm : Liquid Temperature

Driven by dry type submersible motors, “AQUATEX” dewatering pumps are virtual workhorses that can take on the toughest chores. Ideal for draining flooded basements and storm water drains as well as other high discharge applications.   Applications Pumping waste water in Residential apartments, Multistorey buildings Pumping waste water in Hotels, restaurants and hospitals Waste water without solids Sump drainage Waste water treatment plants Flood water pumping Features Dry type submersible induction motor Class “F” insulation Shaft and fasteners are in stainless steel to enhance life Impeller and casing are coated with chemical resistance coating to improve life and performance Cable connectors filled with resin prevents water leakage into the motor through the cable wire Dual mechanical seal prevents water entry into the dry motor portion at two interfaces, one at pump portion to oil chamber and another at oil chamber to dry motor portion Open type impeller prevents clogging of small solids and allows sand and silt to pass through.    

We are engaged in manufacturing, exporting and supplying Vertical Multistage Pumps that are made from quality material. The Vertical Multistage Pumps we provide are demanded by the clients for their efficient performance. We offer a wide variety of Vertical Multistage Pumps that tune in to various requirements of the clients. Attributes Totally enclosed fan cooled motorsSuitable for 340-440V Three Phase 50Hz power supplyDynamically balanced rotorsVibration free and noiseless operationHeavy ball bearing to take higher thrust loadLong working lifeMaintenance freeHigh strength Brand AQUATEX Used In High pressure applications Specifications Power3.0 & 20.0 HPSpeed2900 RPMHead Max.258 MDischarge Max60 m3/hr LPM

No. of Cylinders : single

 Output per Stroke : 4 gms

 Blocked Pressure : 130 kg/cm2

 Delivery Hose Length : 2 mtrs

 ID of the Hose : 6 mm

 Drum Capacity : 5 / 10 /20 kg

KND hand operated grease pumps are made with high quality components, for lubrication of vehicles and machineries.   Hand Operated Grease Pumps (HGP-5. HGP-10. HGP-20 ) The pump is of light weight making it portable Hand lever of sufficient length provided for easy operation Can be used at remote places where pneumatic pumps cannot be used.

We excel in manufacturing, supplying a wide range of a wide range of Grease Pump. We use advanced technologies and machinery for the process of manufacturing. These products are reckoned amongst the clients for rendering smooth performance. These pumps are precisely engineered by our dedicated and knowledgeable professionals who are masters in the concerned domain. Features: Large scale of applications Customized range High quality products

Advanced Concentric disc valve technology Light weight piston & teflon rings One piece bearing suited for near life time operation Overhung crank shaft for easy maintenance Reciprocating Compressor Now you can say good-bye to..... Foundation Site Enginerring De-Scaling Nightmars Maintenance Headaches Advanced Concentric disc valve technology Manufactured on computerised SPMs, the perfect concentricity and flatness provides close tolerance and ensures a aerodynamic flow for low resistance. All of which means higher reliability, least valve losses & power savings. Light weight piston & teflon rings Special design light weight piston result in lesser inertia forces resulting in increased power savings and the ceramic filled teflon piston rings are higher wear resistant and hence have longer life. One piece bearing suited for near life time operation Shrunk fit bearings ensure proper alignment & clearance thereby reducing wear and tear. They have very high load bearing capacity. Ideally suited for high pressure piston compressors. Overhung crank shaft for easy maintenance Twin sleeve bearing on the crankshaft at the flywheel side to take the weight of the belt wheel. It is very easy to repair at customer site. Oilfree Air Compressor Technical Specification    

Texmo Bore well compressor pumps are designed for drawing water from deep bore wells of diameter over 4 inches. They are coupled with high quality motors to ensure efficient performance. Also available in Monobloc versions where the motor and compressor are assembled into a single integral unit.

Condition : New

Model : ST-300

Stage : 1

Cylinder : 2

Required Motor : 3 hp

Air Pipe : 1/2" inch

Pumping Height : 25%, 50%, 75%

Lifting Height : 75%, 50%, 25%

Type : Water Pumps

Usage : Water Pumps

Weight : 20-40kg, 40-60kg, 60-80kg

Usage : Agriculture, Industry

Operating Type : Automatic, Manual, Semi Automatic

Power : 1Bhp, 2Bhp

Pressure : High Pressure, Low Pressure, Medium Pressure

Power Source : Petrol