Industrial Valve Dealers in Town Hall, Coimbatore

• Connection Type: Thread
• Valve Size: 1/2 inch BSP
• Valve Structure: external pilot operated type
• Media: Air, Gas
• Drain Time: 4 seconds
• Power Supply: AC/DC
• Brand: Emmaar
• Pressure: 2 Kg/sq.cm for external pilot operated
• Working Pressure: upto 70 Kg/sq,cm
• Voltage: 230V AC
• Temperature: 70 deg.C
• Power: 50 HZ, 230 V AC
• Port Size: 1/2 inch BSP

• Features: Precision engineered, Long service life
• Item Code: V3DO2
•  :  
•  :  
•  :  

This series solenoid valve adopts integral slot throttle structure. The valve hole is processed with special high precision finishing technique. The product has good performance and good change over with long service life, handsome shape and large airflow. It is widely applied to pneumatic system  .

We are offering knife edge gate valve. uni-directional knife edge gate valves compliance : mss-sp 81 size : 50 nb to 600 nb rating : class 150 seat design : metal to metal (class iv leakage)/ resilient seat(bobble tight shut-off ) ends : wafer material : cast iron to is 210 gr. Fg 200 /astm a 216 gr. Wcb / astm a 351 gr. Cf8 / cf8m

We are dealers of pneumatic valves, pu hose ,pu fittings , pu valves, air blow gun (plastic & aluminium ).

• Material: MS
• Features: Sturdy construction, Accurate dimensions, Longer service life
• Size: 1/2 to 3 inch
• Pressure: 40 to 150 kg/cm2
• Temperature: 20 to 80 Deg C

• White: Ivory

We are offering angle valve. Our angle valves are made of virgin abs and designed to save water. This unique design high grade finish will add luxuries feel to your toilet

• Material: BRASS
• Country of Origin: Made in India
• Size: GS1 series Sizes R1/8, R1/4, R3/8, R1/2, R3/4
• Media: AIR
• Operating Pressure: 0-10 BAR

• Series: VR4V03
• Normal Size: INCH
• 3/8": MM
• 10: Maximum Flow
• GPM: 24
• IPM: 90
• Maximum Pressure: PSI
• 5000: BAR
• 350: Mounting Standard

We are a quality-driven firm and make sure that our offerings are properly kept and processed. For this, we have installed all the in-house storage facility that helps us in meeting bulk and urgent requirements of the clients. Emerged as an eminent Supplier, we are well-known for dispatching the comprehensive range of steam valves used on boilers & steam lines.

• Body: CI / WCB / F.S / SS 304 / SS 316
• Internals: 13% Cr Steel, Gun metal / SS 304 /SS 316
• Actuator: Hand Wheel
• Size Range: 15mm to 1000mm (Class 150 & Class 300 )

A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restric¬tion is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the Petroleum industry. A globe valve, different from ball valve, is a type of valve used for regulating flow in a pipe line, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are named for their spherical body shape with the two halves of the body being separated by an internal baffle. This has an opening that forms a seat onto which a movable plug can be screwed in to close (or shut) the valve.  Special Features: Compact Design Maintenance free Bolted bonnet, solid wedge gate, outside screw and yoke with rising/non rising stem of gate valve, Plug type disc and outside screw and yoke are provided ease of operation Wedge – Ground and lapped to precision Gland – Self aligning type Integral satellite seat and backseat Applications Cement & textile industry Fertilizer & chemical plants Petrochemical Industries & Refineries Steel plants Thermal, hydel and nuclear power plants Pulp & paper Industry Water & sewage treatment plants Food and beverage industries Pharmaceutical industry & Gas pipelines Etc. Constructional Features Body The body is the main pressure containing structure of the valve and the most easily identified as it forms the mass of the valve. It contains all of the valve's internal parts that will come in contact with the substance being controlled by the valve. The bonnet is connected to the body and provides the containment of the fluid, gas, or slurry that is being controlled. Bonnet The bonnet provides a leak proof closure for the valve body. The threaded section of the stem goes through a hole with matching threads in the bonnet. Globe valves may have a screw-in, union, or bolted bonnet. Screw-in bonnet is the simplest bonnet, offering a durable, pressure-tight seal. Wedge The closure member of the valve, wedge are connected to the stem which is slid or screwed up or down to throttle the flow. Wedge is typically of the balance or unbalanced type. Unbalanced wedge are solid and are used with smaller valves or with low pressure drops across the valve. The advantages are simpler design, with one possible leak path at the seat and usually lower cost. Balanced plugs have holes through the plug. Advantages include easier shut off as the plug does not have to overcome static forces. Stem The stem serves as a connector from the actuator to the inside of the valve and transmits this actuation force. Stems are either smooth for actuator controlled valves or threaded for manual valves. The smooth stems are surrounded by packing material to prevent leaking material from the valve. This packing is a wearable material and will have to be replaced during maintenance. Seat Ring The seat ring provides a stable, uniform and replaceable shut off surface. Seat rings are usually held in place by pressure from the fastening of the bonnet to the top of the body. This pushes the cage down on the lip of the seat ring and holds it firmly to the body of the valve. Seat rings may also be threaded and screwed into a thread cut in the same area of the body   Technical Specification Design and Manufacturing Standard • API 600 for Class 150# Testing Standard • API 598 / BS 6755 Size range • 15mm to 1000mm (Class 150 & Class 300 ) Operation • Manual hand Wheel • Electrical and Pneumatic actuator with accessories.

• Materials of construction: Cast iron
• Models: Single acting & double acting
• Available nominal size in mm single acting standard: 12, 19, 25 mm
• Heavy: 12, 19, 25 mm
• Double acting: 50 mm
• Maximum Operating Pressure            : 5 bar ( Single acting) 15 bar (Double acting)

C.R.I.Air valve is connected with delivery pipeline to eliminate the trapped air in the system. Normally in horizontal pipeline, due to un-evenness in ground level, there will be an entry of air into the pipeline it results in pipe damages. Air valves are installed in the pipelines.   Features    Metal parts of air valve is coated with epoxy paint to avoid rust formation Double acting air valve in specific sizes Rubber washer is made up of synthetic rubber for Long life.

• Features: Long life, High strength, Optimum finish

• Brand Name: Mercury
• Material: Aluminium (Body),Nitrile Rubber (Seal)
• Media: Air (Filtered 40 micro and lubricated)
• Model: NP Series
• Power Consumption: DC- 3W ; AC- 5VA Hold,7.5 VA Pickup
• Pressure Range: 2.5 - 10 bar

• Size range: 40mm to 600mm

Wafer butterfly valve Unique centre stem lock design virtually eliminates any disc movement while during the open close function Unique stem retention system to blow out proof stem easy assembly & Disassembly of valve.

• Technical Specifications: Body
• Cast Iron / Cast Steel / Aluminium Diecast / SS304 (CF8) / SS316 (CF8M) / Polypropylene (PP) / uPVC: Disc
• Cast Steel / Ductile Iron / SS304 (CF8) / SS316 (CF8M): Seat
• Nitrile / EPDM / Neoprene / PTFE / Viton / Metal Seated: Seat Leakage
• Tight Shut Off: Temperature
• -20°C to 200°C: Pressure Rating
• PN 10 / PN 16 ( PN 20 ON REQUEST): End Connection

• Features: Rust free, Easy to operate, Dimensional accuracy

• Type: Automatic, Semi-Automatic

The Multiport Valve offered by us is fabricated using quality material and hard ceramics for effective functions and enhanced service life. Our Multiport Valve is widely appreciated for its innovative design, easy handling and excellent seal capability for preventing internal leakage. Multiport Valve offered by us find applications in various industries.

• U-PVC MATERIAL: ABS HANDLE
• Brand Name: APAXX

We are offering u pvc compact ball valve, u-pvc material, din standard, plastic inner ball, 12" to 4". Pn 16. Pp handle abs handle. Apply for cold water.

• Material: Carbon Steeel, Cast Iron, Stainless Steel
• Color: Blue, Red, Sky Blue, White
• Power: Hydraulic, Manual
• Pressure: 1000 Kpa, 520 Kpa
• Structure: Double Half Shaft, Pinless
• Feature: Blow-Out-Proof, Casting Approved, Durable, Investment Casting
• Port Size: 0.1mm-5cm, 2cm -50cm, 5cm-60cm

• Features: High efficiency, Optimal performance, Easy installation

• Material: Carbon Steeel, Cast Iron, PP, Stainless Steel, UPVC
• Color: Blue, Red, Sky Blue, White
• Pressure: 1000 Kpa, 520 Kpa
• Feature: Blow-Out-Proof, Durable
• Operator: Electric Actuator, Gear, Lever

• Material: Brass/Bronze
• Country of Origin: Made in India
• Brand Name: Rilon
• Brand Name: Rilon
• Voltage: DC 24 V
• Pressure: 0.8 Mpa
• Model Name/Number: SVZ 2.5
• Media Type: Gas
• Valve Size Type: 2.5 inch

• Construction: Direct acting, seat type.
• Mounting: Threaded port body
• Flow handling capacity (Nominal): Size 10 – 30 i/min, size 20 – 115 i/min
• Operating pressure: 315 bar
• Hydraulic medium: Mineral oil.
• Viscosity range: 10 cSt to 380 cSI.
• Fluid temperature range .: -20 °C to +70 °C

Abc Type Fire Extinguisher, Fire Alarm Bell, fire alarm equipments

Gauge Isolator Valves, Hydraulic Control Valves

high pressure globe valves, Cryogenic Globe Valve, Bellow Seal Globe Valve

Solenoid Valves, Globe Valves, frl fittings, Tube Fittings