Instrumentation Equipment Dealers in Race Course, Coimbatore

What is STARTER? STARTER is an agent for activating the composting process needed to degrade the farm residues. It is comprised of microbial enzymes, cellulose digesting microbes and nutrient supplements. It can be used for preparation of compost from a variety of agricultural waste. Its use saves time and labour greatly shortening the composting process. The quality of the compost obtained is better. What is composting? Composting is the controlled aerobic biological decomposition of moist organic (biologically derived carbon-containing) solid matter to produce a soil conditioner. Need for composting with STARTER Applying raw organic materials directly to the soil is not the best way for effective recycling of nutrients since such waste contains substances like cellulose, starch and lignin, which are resistant to microbial degradation. The natural process always takes much time for producing quality compost. The decaying organic matter may also tie up the nutrients by immobilization process and make them unavailable for plant growth. The composting process encourages creation of specific groups of organisms in its various stages. It converts the complex organic form of nutrients into simpler forms by a rapid mineralization process. The nutrients are released in a slow and steady manner from the compost which can such that they can be utilized by the plants as they grow. Process of Composting The composting microorganisms present in STARTER produce enzymes secreted outside the microbial cells. These transform molecules of organic matter into less complex chemicals and energy. The enzymes such as amylase, cellulase, lipase and protease produced by the STARTER are responsible for decomposition. Windrow method of composting n agriculture, windrow composting is the method of producing of compost by piling organic matter or biodegradable waste, like animal manure and crop residues, into long rows (windrows). This method is suited for producing large volumes of compost. These windrows are generally turned to improve porosity and oxygen content, to mix or to remove moisture and to redistribute cooler and hotter portions of the pile. In the process of composting, microorganisms present in STARTER break down organic matter and produce carbon dioxide, water, heat, and humus, the relatively stable organic end product. Under optimal conditions, composting proceeds through three phases The mesophilic, or moderate-temperature phase (4 days). The thermophilic, or high-temperature phase (20 days). Cooling and maturation phase (6 days). STARTER contains microbes which will withstand mesophilic and thermophilic range. Microbial consortia in STARTER Trichoderma spp.Trichoderma is an aerobic organism which grows at 25°c. It functions as an antagonist in the biological control of some important plant pathogenic soil born fungi, being a saprophyte which adapts and thrives in diverse situations and produces a wide array of enzymes. Cellulomonas spp.Cellulomonas is an aerobic organism which grows at 25°c. It produces cellulases and xylanases to degrade organic matter containing cellulose. Bacillus spp.Bacillus an aerobic organism which grows at 37°c. It is able to degrade starch and cellulose containing organic matters by production of various enzymes. Streptomyces spp.Streptomyces is an aerobic organism which grows at 30°c and is widely distributed in nature. It produces lignin-degrading enzymes and also produce cellulase, antibiotics and plant growth regulators which help in improving the quality of the compost. Pseudomonas spp.Pseudomonas is an aerobic organism which grows at 25°c. It is a gram negative bacteria capable of degrading lipid rich organic matter, it is a biocontrol agent effective against soil fungal pathogens. Candida spp.Candida is an aerobic organism which grows at 28°c. It is able to degrade phenol rich organic wastes. Method of using STARTER in composting 1 Kg of STARTER is mixed with 10 litres of 10% jaggery/sugar/10 litre of sugarcane juice and kept overnight for the regeneration and multiplication of the microbial cultures present in STARTER. After 24 hours of incubation, add enough water to made up 100 litres and spray this solution over 5 MT of farm waste. Make a windrows of organic waste 3 feet high and 3 feet in width, where length of the windrow varies depending on the availability of organic waste. Every week the windrow is to moistened and mixed well. The temperature should be monitored on the 1st, 15th and 30th day. As the temperature of the heap comes to normal temperature, the windrow is considered to be fully composted. The duration of the composting process will be 30 days or a bit more. Things to be monitored during decomposition process Particle Size To enhance the speed of the composting process the bigger organic waste particles can be chopped into small pieces. Aeration To ensure sufficient aeration composting, piles should be aerated by inserting 1-2 inch plastic pipes. Composting piles may be turned either manually or mechanically. Turning the compost may be repeated 3-4 times during composting process to bring the colder outside material closer to the hotter inner center of the windrow. Moisture Requirement Sprinkle water at 5 days intervals during the early stage. Maintain 50 -60 % initially . 30 days after composting C/N ratio should be checked. Once the compost is mature the moistening operation can be stopped. Maturity of Compost Analyze the quality of compost and finally dry to reduce the moisture to 15-20%. Screen the compost to remove the undigested coarse material. The compost can then be mixed with bio fertilizers and bio control agents to increase the nutrient availability and crop production.

We are the prominent manufacturer and supplier AMF Panel Boards that are available in varied specifications as per the specifications detailed by clients. In order to manufacture these ducts, we use the finest quality raw material and cutting-edge technology. We ensure our clients that these ducts are in compliance with international quality standards and are highly admired for their trouble free performance, high efficiency, longer service life, low maintenance and precise dimensions.

Electrical LT, HT , Metering Panels

• Weight: Approx. 80 grams
• Temperature Accuracy: ±0.3°C  (±0.5°F)
• Humidity Accuracy: ±3 %RH
• Temperature Range: -35 to 80°C(-31 to 176°F)
• Humidity Range: 0 – 100%RH
• Sensor location: Internal
• Resolution: 0.1 ??? (0.2°F) / 0.1%RH
• User Type: Multi use – DGraph software used to re-start and re-use
• PDF Report: Generate PDF report automatically and read PDF report without any software and driver
• Typical Application: Cold Chain Refrigeration Transportation HVAC Food & Pharmaceutical  Warehouse
• Memory Capacity: 8640 readings or more
• Sample Rate: 1sec. to 24hr.
• Start Method: Immediately, Start by button
• Stop Method: Press button to stop(Manual), or stop automatically after task finished
• Button: Press button to start or stop
• Elapsed Time: According to set sample rate
• LED: Logger Status indication; Low battery indication
• Alarm: User programmable high or low alarm limit for each channel; Alarm delay and type can be set
• Communication Interface: USB2.0
• PC Software: DGraph software used to set and analysis (Compatible with Windows XP, Vista, 7,8,10(32 bit & 64bit Versions))
• Power Supply: User replaceable CR2032 3.0V Lithium Battery
• Battery Life: Approx. 1 Years @ 5 Minute Sample Rate
• Operating Range: 0 to 100%RH  -35 to 80???(-31 to 176???)
• Storage Range: 20 to 60%RH  10 to 50???(50 to 122???)
• Case Material: ABS
• Dimension: 94mm × 39mm × 17mm
• Standard Certification: ROHS, CE

• Size: Multisizes
• Type: Control Panels
• Application: Control Panel
• Color: Brown, Grey, White
• Voltage: 110V, 220V, 380V, 440V
• Application: Boiler Control
• Material: ABS, Mild Steel, PVC
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Power Source: Battery, Electric
• Phase: Double Phase, Single Phase, Three Phase
• Autoamatic Grade: Automatic, Fully Automatic, Semi Automatic
• Warrenty: 1 Year, 2 Years

Siemens plc for humidification and aircondition control panels,all type of custom aircondition control panel manufacturers, all type of humidity and dehumidity work in textile,hospital works we undertaken.

• Brand Name: STEINEL

sri vaari engineering & agencies is considered as the prime manufacturer and exporter of proximity sensors. the proximity sensors, offered by us, are worldwide popular for their advanced machine control and monitoring systems. types : inductive type proximity sensors sizes : 8mm 12mm 18mm 30mm 36 mm 50mm 65mm 80mm 100mm sensors with pnp (or) npn logic no (or) nc output flush or non flush mounting available used for metallic targets used for : generate clean digital signals in the proximity of metallic objects solve contact bounce problems associated with electromechanical switches detects an object when the object approaches within the detection boundary of the sensor automate the control of power accessories specifications : advance machine control and monitoring systems contactless detection of metallic targets accomplished with inductive proximity sensors consists of a frequency oscillator circuit at its sensing head followed by a level detector hall-effect sensors detect a change in a polarity of a magnetic field provide a much more efficient and effective method of longer range detection design based on : variable reluctance eddy current loss saturated core hall effect applications : in all automotive industries

• Features: Corrosion resistant, Longer service life, Sturdily constructed

• Features: Smooth performance, Longer operational life, Require less maintenance, high reliability and robust construction

We hold specialization in manufacturing, supplying, and exporting the premium quality Solar Panels. The Solar Panels, we offer, are precisely assembled as per the international norms. Owing to diverse qualitative features like low maintenance cost, easy to use, and advanced features these Solar Panels get highly used in commercial and residential purposes. Besides, we pack these Solar Panels in wooden and cartoon packing to ensure safe delivery purpose. Highlights Highly efficientAccurate dimensionCorrosion resistancePerfect finishingDurable

• Machine Capacity:: 120 and 250 Tons
• Weight Range: :0.500 to 1.500 Kg

We offer to our clients with high quality Aluminium Automobile Components used in industries like automobiles and engineering. Our components can be provided in customized sizes and specifications to meet the varied requirements.

• Features: High quality, Easy to operate, Optimum functionality

• Features: Easy installation, Automated operation, Consistent performance, Longer functional life

• Display Type: 2 x 8 Characters LCD (With Backlight) + 5 Keys (4 User Configurable)
• Country of Origin: Made in India
• Brand: Selec
• Manufacturer Series: DIGIX-2-1-0 24VDC
• I/O Points: 10+2* (PNP Type) Including 1 Fast Input Channel
• Communication Port: RS485 Based MODBUS RTU Protocol
• Usage/Application: Automation

• 1920 × 1080 / 60 Hz ,1280 × 1024 / 60 Hz, 1280 × 720 / 60 Hz, 1024 × 768 / 60 Hz: 32 Kbps-6 Mbps

We manufacture, supply and export technologically advanced range of Panel Boards. To prevent electrical shocks, we manufacture these products using low conductivity materials. Moreover, we have appointed diligent electrical engineers, who possess sound knowledge pertaining to the construction of Panel Boards. Over the years, we have been successful in emerging as on of the reliable company due the unmatched quality and high durability standards of our offered products

Trailing Cables PUR Trailing and Control Cables Special Crane Drum Cables Medium-Voltage Power Cable

• Usage: Industrial use
• Type: Lever Limit Switch
• Certification: ISO 9001:2008 Certified
• Condition: New
• Max. Voltage: 240 VAC
• Surface Finishing: Power Coated
• Current Rating: 16A
• Switch Type: Lever Limit Switch