Jenesis Control India Private Limited Athipalayam, Coimbatore, Tamil Nadu

Volume Booster is used to when the piping distance is long from the instrumentation control room to the actual working area of the actuator. To boost the actuator speed considerably. It helps in high cost reduction in the form of reduced air loss due to less working of the compressor with our compromising on the working of the actuator. Technical Specification: Max. Supply Pressure : 9 Kg/cm2 Max. Signal Pressure : 7 Kg/cm2 Max. Output Pressure : 7 Kg/cm2Connection : NPT ¼/ NPT 3/8 Air Flow (l/min) : 600Air Consumption (l/min) : 3Linearity : +or-1%Hysteresis : +or-1%Pressure Ratio : 1 : 1Material : Al Die Cast   Application: All compressed air piping installations, in Damper Actuators before the positioner to increase the flow of air to the actuators. Ideal for Control Valve , Power cylinders.            

These Cylinders have a wide variety of application such us in Lift Ramps, Dump TrucksMaterial Handling equipment and Earth movers. The stroke and bore Size ranges up to Ø80mm Diameter and can be used for a Stoke of up to 1 meter. With a well proven design this robust cylinder can be used for a wide variety of demanding application in hydraulics. These cylinders have a wide approval rating for its durability and robustness. Technical Specification: Size Rage : Ø50 - Ø 80" Bore Stroke Range : 50 - 1000mm StrokeModels : JH50, JH63, JH80Application : Dump Trucks, Lift Ramps and Material handling Equipment, Earth Movers  

These Cylinders are created to Cartier to the needs of existing Nucon Model Cylinder customers. These cylinders are used in a variety of application in heavy duty Mechanical sections of Chemical, Paper, Power, Rubber Plants. They are to the actual specification of Nucon standard Cylinders. Technical Specification: Bore Size : 4,5,6,8 InchModel Type : ZRM/ ZTMStroke : up to 1000mmEnd Covers : Mild Steel/ AluminiumBarrel : Al tube/ Seamless Tube.Seals : NBR ,VitonPiston : Mild Steel/AluminiumPiston Rod : EN Series, MS, SSPressure : 1-10 BarMedium : Dry AirMounting : Standard and Custom mounting are availableApplication : All Mechanical Sections of the any Plant especially foundry units.  

PL 02 is a Linear Positioner suitable to be fitted on to Linear Actuator with a stroke range above 75- 800mm. Linear Positioner is used in a pneumatic circuit to control the movement of the actuator. It actually Positions the Actuator at the exact location that we require. Technical Specification: Control signal : 0.2 - 1- 0 BarSensitivity : 0.25 % of signal rangeAir supply : Dry instrument airLinearity : ± 1% of stroke (Direct Action)Zero Adjustment : ± 10%Range Adjustment : ± 10%Connections : 1/8" BSP

These cylinders are used in Knife Gate Valves. These cylinders come with Standard Mounting on the Cap Side of the Cylinder to be directly fit to the Knite gare Valve. Standard and Custom made mounting are also possible. Technical Specification: Bore Size : 32mm - 6inch Stroke : up to 200mmEnd Covers : Aluminium / Mild SteelBarrel : Al Round Tube, Mild SteelSeals : NBR, (Optional- Viton)Piston : Aluminium, Mild SteelPiston Rod : EN Series & MSPressure : 1-10 BarMedium : Dry AirApplication : Knife Gate Valves and Reverse Mount application  

  ENESIS Standard Cylinders are used in a variety of application in heavy duty Instrumentation / Mechanical sections of Chemical, Paper, Power, Rubber Plants just a name a few. As these cylinders are power cylinders they are very sensitive to the slightest input from the control room.  Technical Specification: Bore Size : 2.5 inch - 24 inchStroke : up to 1000mmEnd Covers : Mild SteelBarrel : Seamless Tube.Seals : Viton, PUPiston : Mild SteelPiston Rod : EN Series, MS, SSPressure : 1-10 BarMedium : Dry AirMounting : Standard and Custom mounting are availableApplication : All Instrumentation/ Mechanical Sections of the any Plant.      

  Air Shifter is used in Power Take offs to engage the gears in their respective positions. This work with compressed air which is already in the available in the vehicle. The control signal is given by the driver. It is also called gear engagement cylinders. These cylinders are supplied to Major OEM's of Power Take offs. Technical Specification: Bore Size : 32 mmStroke : up to 100mmEnd Covers : Anodized AluminiumBarrel : Al Round Tube, "Mickey Mouse" SectionSeals : NBR, (Optional- Viton)Piston : Anodized AluminiumPiston Rod : EN Series & MSPressure : 1-10 BarMedium : Dry AirApplication : PTO Gear Boxes and any other pneumatic gear shifting application.