Limit Switches Dealers in Coimbatore

Lever Limit Switch Switch Angular Roller Lever, Roller Lever Limit Switch and Schmersal Magnetic Limit Switch from Coimbatore,

• Material: NBR, Nylon, PVDF
• Certification: CE Certified, ISO 9001:2008 Certified
• Usage: Vibrating Levelling
• Frequency (Hertz): 50HZ, 60Hz
• Inner Diameter: 0-20mm, 20-40mm
• Voltage: 200VDC, 230VAC
• Power: 0-5Amp, 10-15Amp, 5-10Amp
• Temperature: 0Dig C To + 60Dig C
• Setting Range: 0-1500pF, 1500-3000pF

• Brand Name: Omron
• Rated Voltage: 240 VAC
• Switch Type: Rotary Limit Switch
• Usage: Machine Tools

Plunger Limit Switch with safety function are suitable for sliding and hinged safety guards which need to be closed to ensure the necessary operational security. In combination with safety monitoring modules all position switches class 1 shown in this chapter achieve Control Category 3 or 4 to EN 954-1. Further applications for positions switches class 1 are most varied positioning duties. The variety of requirements to be found in practice can be met in detail by means of a wide range of actuating elements.

• Type: Limit Switches
• Material: NBR, Nylon, PVDF
• Application: Vibrating Levelling, Industrial Control Current Rating
• Voltage: 200VDC, 230VAC
• Hole Diameter: 0-20mm, 20-40mm
• Protection: Waterproof

We are the main supplier of this product.

• Switch Type: Lever Limit Switch
• Pole Throw: SPST
• Switch Configuration: Both
• Rated Voltage: 240 VAC
• Brand Name: Siemens
• Usage: Industrial
• Model Name/Number: 3SE5212-0CC05

• Usage: Industrial use
• Type: Lever Limit Switch
• Certification: ISO 9001:2008 Certified
• Condition: New
• Max. Voltage: 240 VAC
• Surface Finishing: Power Coated
• Current Rating: 16A
• Switch Type: Lever Limit Switch

ACCL is used for efficient distribution of generator power in high rise apartments, townships, commercial buildings, etc without overloading the generator. Detailed Description The ACCL will switch the load to generator supply during failure of mains supply. It also acts as a current limiter when load on generator exceeds the pre-set limit thus avoiding any overload on the generator. Specifications 01 Unique - patented design - Contactor based ACCL 02 Heavy Duty - AC 32A and AC22A utilization category 03 Long life - 25000 operations 04 Safe - 5 kA short circuit capacity Tested at Third party lab 05 Energy efficient - Low Power consumption as coil operates only during DG 06 Cool - Low Temp rise as power consumed is less than 0.2VA on EB 07 User friendly - even during overload, load will be On for 10 sec so that user gets some time to switch off unwanted loads. Beep & LED indication. 08 Proven - Tested at third party (UL LAB) 09 Technically sound - Break before make due to higher air gap 10 Convenient - Auto Reset Facility 11 Versatile - Can be used in new buildings as well as for retrofitting (i.e 2 Sub main or 1 Sub main wiring method)

• Brand Name: MICRO
• Length: 220 mm
• Current Rating (Amps): 6A
• Power/Voltage (V): 500V
• Model No.: ME 201
• Diameter: 6 mm

Different types of valves has been automated using actuator and controlled by plc,dcs,scada systems. Automated valves has been used in all process industries. It is used to monitor the position of the actuator

A prominent supplier of huge range of Rotary Limit Switches.

Mechanical Limit Switche, Line Load Reactor, LED Pilot Light

Limit switches are used for braking and switching-off operations. They cuts the power to the drive motor when the crane moves beyond the travel limit. The limit switch hits the striker at the travel limit and changes the direction of rotation of the travel drive. Linear and rotary limit switches are provided for safe working.

Micro limit switch, Trinity Touch Wiring Duct

Limit Switches, Push Button Switches, Under Voltage Relays

Worm Drive Limit Switch, Light profile crane systems

Limit Switches, FOOT SWITCHES, Proximity Sensors

Plunger Switches, Digital Programmable Thermostat, digital room thermostat

Limit Switch, Programmable Logic Controller, Human Machine Interface