Marine Equipment Dealers in Coimbatore

Ibr, cast steel, casting, ductile, ci, sluicevalves, resilent gatevalves flanged end.with gear raising and non rising types.

• Type: Counterflow Cooling Tower
• Color: Blue, Grey
• Country of Origin: India
• Brand Name: World Cooling Towers
• Material: Fiberglass Reinforced Plastic
• Shape: Square
• Certification: ISO 9001:2015
• Condition: New
• Warranty: 1 Year
• After-Sales Service Provided: Yes
• Cooling Type: Counterflow Cooling
• Tower Type: Rectangular Or Square
• Tower Material: Fiberglass
• Tower Design: Square

• Weight: 100-200kg
• Color: Grey
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Temperature: 50-100℃
• Gauge Thickness: 10-15mm
• Brand Name: JE

Cooling Tower Selection :Cooling towers are designed and manufactured in many sizes and configurations. Recognizing and understanding the different configurations and advantages is essential for specifying the most cost effective solution for the end user. The purpose of this bulletin is to highlight the differences between crossflow and counterflow cooling towers.Counter Flow Cooling tower overview : The primary task of a cooling tower is to cool water by rejecting heat into the atmosphere. This heat rejection is accomplished through the natural process of evaporation that takes place when air and water is brought into direct contact in the cooling tower. The evaporation is most efficient when the maximum water surface area is exposed to the maximum flow of air in the longest possible period of time. Cooling towers are designed in two different configurations, counterflow and crossflow. The specific configuration indicates the direction of the air flow in relation to the water flow. Cooling water distribution and air distribution are designed in a harmonious configuration and are equally important to determine a maximum efficiency in heat rejection. Counterflow towers Counterflow towers use, in general, low pressure spray nozzles to divide the hot water equally over the infill surface in fine droplets. A drift eliminator section above the water distribution rejects all the water in liquid form and keeps this in the circulating system. Only water evaporated in the air leaves the tower with the saturated air. A nozzle distribution is sensitive to changes in water flow thus it affects the over all efficiency. The air movement is vertically through the fill in counter flow to the downwards fall of the water. Counterflow towers have in general a smaller footprint than crossflow towers but require a higher pump head due to the typical distribution system with nozzles.

• Size: 4inch, 5inch
• Type: Pvc Gate Valves
• Material: PVC
• Application: Liquid Supply
• Color: Silver
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Structure: 1war, 2way, 3way
• Direction: Two way

Owing to our years of experience, we have gained immense expertise for manufacturing & supplying Gate Valves from Tamil Nadu, India. When it comes to quality, our Gate Valves always stands tall on industry defined parameters, thus quality is assured. Apart from this, we possess all the requisite arrangements for quick and bulk delivery of Gate Valves at a time.

We are offering gate valves. Gate valve product range: size : dn50 - dn300 type : bolted bonnet,os & y,flexible wedge rating: class 150,class 300 & class 600.

It is a portable grinding machine for grinding and re-facing of valve seats, equipped with powerful and efficient pneumatic motor.

• Type: Hydraulic Pumps
• Certification: CE Certified
• Application: Industrial
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw

Purchasers can order our goods in wholesale, as we ensure year around obtainability. In addition, we have dependable shipping network to ensure timely distribution. Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts.

We are one of the widely acclaimed manufacturers and suppliers of Cooling Towers. The offered cooling tower is a versatile heat rejection device, which is used to reject the waste heat to the atmosphere. Our supplied cooling tower employs fresh air for cooling the atmosphere and environment. The offered cooling tower is available at very cost effective and affordable market rates.                  

Tested according to various specifications and designed to utmost perfection, the Wire Cut Extruder Mouth that we provide is widely sought after in the market today. They are made to ensure a comfortable user experience each time. The accurate bar size and good oil circulation are added features. This ensures that the releasing of the bar is done smoothly in a secure manner. We deliver to all parts of the country.   Offered range of Wire Cut Table are manufactured from high grade quality material. These are easily available at very reasonable price in market. These wire cut extruder are duly tested by our experts on various quality parameter. Features:   Smooth bar release Avoided oil waste Best oil circulation Accurate bar size   Specifications:   Material: Stainless Steel Size: 3" pipe, 0.45 sugg

We deal in Gate Valves, which are mainly designed for on/off control and ensure low-pressure drop. Owing to the efforts of our dedicated procurement team, we are able to bring forth premium Gate Valves for the buyers. These Gate Valves are used in various industries owing to their corrosion resistance and durability. We are supported by a team of dexterous professionals, which ensures the Gate Valves are in compliance with the international standards. Contact us, to get our Gate Valves at the most reasonable prices.

• Option Available: 8x150W, 6x250W, 4x350W
• Rotation: 340 Deg
• Floodlights: 6x250W
• Lamps: LED
• Options: Homologated road trailer
• Model: Synchronous
• Frequency (Hz): 50
• Degree of protection: IP23
• Insulation class: H
• Single phase voltage: 5.7 kVA - 230V
• Units Per Truck: 18 sets
• Auxiliary outlets: 2 kVA
• Engine Model: KOHLER KD441
• Fuel: Diesel
• R.p.m: 3000
• Tank capacity (I): 120
• Consumption (I/h): 0.8
• Running time (h): 150
• Noise level (dBA) at 7m: 65
• Dimensions max. (mm): 2600x1410x2500
• Total weight without fuel: 700 Kg
• Illuminated Illuminated area: 5000 sqm

We are offering sea water pump. Body material: closed grain cast iron. Impeller: gunmetal. Shaft: stainless steel. Seal: graphite and mechanical. Bearings: two ball bearings. Pulley: 3" b type (double groove). constructed from high quality alloys cast and stainless steel shaft for ruggedness and reliability. resist corrosion due to sea water. easy to service and maintain. more abrasive wear. no clogging on hard or soft solids. no air-locking problems. Specification flow rate: 5.5lsecond, variable speeds, self priming. Weight: 25 kg inputoutput bsp: 1 ½ “x 1 ½ “

• Material: Mild Steel
• Features: Highly Durable
• Color: Blue
• Pump Type: Rotary Pump
• Automation Grade: Semi-Automatic
• Usage/Application: Hydraulic Pump Spares
• Power Type: Fuel
• Packaging Type: Box

• Voltage: 220V
• Automatic Grade: Automatic
• Power Source: Electric
• Rated Voltage (Volt): 110 V
• Motor Speed (Rpm): 1200 to 1500 Rpm

  The transducer sends high frequency pulses to the bottom of a body of water where these pulses are reflected back and converted to electrical pulses that are amplified and displayed on the easy-to-read LCD. 7-Digit LCD is backlit for night use. These compact depth sounders transport easily and store DC dry cell battery (included) conveniently – they will even slip into a shirt pocket! Powered by a 9V DC dry cell battery (included), the sounders have a battery life of approximately 500 uses and automatically shut off after 10 seconds.

• Pressure: up to 10 Kg/cm2
• Capacity: From 10 Lph — 45,000 Lph
• Viscosity: As Low as 1.0 Centre stoke — 300,000 Centre stoke

Our Gear Pumps belongs to family of Positive Displacement Pumps where in driving gear with internal tooth drives the Gear and turns in same direction inside the pump casing.During the rotation of the driving gear the liquid intake takes place at the suction and during the gear meshing, the liquid is displaced outside in the delivery side.   Advantages of Gear Pumps Self priming pumps Steady deliveries without pulsation for clear liquids or with little pulsation butwithout vibration and noise Speed directionally proportional to capacity Highly suitable to handle viscous clear liquids and temperature up to 250 Deg C Can be offered with wide variety of material of construction to suit various corrosive media   Applications   The Internal Ggear Pumps are use to handle the following clear fluids Furnace Oil Mineral Oil Edible Oil Petroleum Gelly Paints & Varnishes Solvents Chemicals Acids Alkalis Hot syrups   Type of Industries Using Gear Pumps Brewery and Distillers Cattle Feed Chemical and Process Cosmetics and Toiletries Edible Oil Effluent Treatment Fertilizer Fisheries Man-made Fibres Marine Oil Exploration Paint and Varnish Paper pulp and Cellulose Petrochemical and Refinery Printing Ink Soap and Detergent Starch Steel Sugar Sewage and Waste water treatment 

Our clients can avail from us a qualitative range of Vacuum Pumps. Procured from reputed manufacturers in the industry, these pumps are offered in varied capacities, power rating and dimensions. These pumps also comply with the various industry standards and meet the requirements of our clients with high efficiency features. Moreover, our range is offered in the following types: * DV Vacuum Pump * DV Vacuum Pump Coupled set * KV Vacuum Pump Attributes: * Motor withstands wide voltage fluctuations * Impeller of high quality bronze material * Designed to prevent overloading and motor burning * Sturdy casting, provided with foot, suction and delivery nozzles * Rotor having outwardly bent multi blade design held on safety by shaft sleeve nuts * Replaceable wearing parts * KV Models with ‘B’ class insulation and IP-44 protection. * DV Motor coupled sets with ‘F’ class insulation & IP 55 * Deep stuffing box for better scaling * Dynamically balanced rotating parts ensure minimum vibrations Range: * Vacuum: up to 660 mm of Hg * Air flow rate: up to 162 m3 / hr * Power rating: 0.75-2.2kw (1Ph) 3.7-7.5kw (3 Ph) * Voltage Range: 180-240V (1 Ph) 300-440V (3 Ph) Applications: * Priming of large pumps * Evacuation of air from suction pipes and chambers * Specific Applications: Twist drilling machine, removing water from pulp layer, labeling, bottle filling, and de-odorising * General Application: Drying evaporation, distillation, filtration, sterilization, condensation, de-gasification, and sucking gases from extrusion, printing and confectionery machines

• Material: Stainless Steel
• Usage: Using for Protuct cable while inserting duct / pit entrence
• Available Size: 75mm to 210 mm
• Brand: Cimat
• Finishing: Galvinized Finish.

• Material: Mild Steel
• Country of Origin: India
• Automatic Grade: Semi Automatic
• Type: Pressure Reducing Valves
• Max Flow: 7 Lpm to 250 Lpm
• Working Max Pressure: 7 to 250 Bar

Pressure reducing valves are used to set the pressure of a hydraulic circuit below that of the main circuit. Operation under remote control is also possible by using the remote control port. Pressure Reducing and Check Valves Pressure reducing and check valves are used to set the pressure of a hydraulic circuit below that of the main circuit. They have check valves, which allow a free flow from the secondary side to the primary. Operating under remote control is also possible by using the remote control port.