Marine Gears Dealers in Kurichi, Coimbatore

• Type: Counterflow Cooling Tower
• Color: Blue, Grey
• Country of Origin: India
• Brand Name: World Cooling Towers
• Material: Fiberglass Reinforced Plastic
• Shape: Square
• Certification: ISO 9001:2015
• Condition: New
• Warranty: 1 Year
• After-Sales Service Provided: Yes
• Cooling Type: Counterflow Cooling
• Tower Type: Rectangular Or Square
• Tower Material: Fiberglass
• Tower Design: Square

• Pressure: up to 10 Kg/cm2
• Capacity: From 10 Lph — 45,000 Lph
• Viscosity: As Low as 1.0 Centre stoke — 300,000 Centre stoke

Our Gear Pumps belongs to family of Positive Displacement Pumps where in driving gear with internal tooth drives the Gear and turns in same direction inside the pump casing.During the rotation of the driving gear the liquid intake takes place at the suction and during the gear meshing, the liquid is displaced outside in the delivery side.   Advantages of Gear Pumps Self priming pumps Steady deliveries without pulsation for clear liquids or with little pulsation butwithout vibration and noise Speed directionally proportional to capacity Highly suitable to handle viscous clear liquids and temperature up to 250 Deg C Can be offered with wide variety of material of construction to suit various corrosive media   Applications   The Internal Ggear Pumps are use to handle the following clear fluids Furnace Oil Mineral Oil Edible Oil Petroleum Gelly Paints & Varnishes Solvents Chemicals Acids Alkalis Hot syrups   Type of Industries Using Gear Pumps Brewery and Distillers Cattle Feed Chemical and Process Cosmetics and Toiletries Edible Oil Effluent Treatment Fertilizer Fisheries Man-made Fibres Marine Oil Exploration Paint and Varnish Paper pulp and Cellulose Petrochemical and Refinery Printing Ink Soap and Detergent Starch Steel Sugar Sewage and Waste water treatment 

Closed circuit cooling towers are one of the methods of heat transfers. They are hybrids that pass the working fluid through a tube bundle, upon which clean water is sprayed and a fan-induced draft applied. The resulting heat transfer performance is much closer to that of a wet cooling tower, with the advantage provided by a dry cooler of protecting the working fluid from environmental exposure and contamination.

Closed Circuit Cooling Tower operate in a manner simillar to open cooling tower except that the heat load to be rejected is transfered from the process fulid to the ambient air through a heat exchange oil. The coil serves to isolate the process fluid from the outside air, keeping it clean and contaminate free in a closed loop. This creates two separate fluid circuits.     a external circuit, in which spray water circulates over the coll and mixes with the out side, an internal circuit, in which the process field circulates inside the coil. During operation, heat is transfered from the internal circuit, through the coil to the spray water, and then to the atmosphere as a portion of the water, and then to the atmosphere as a portion of the water evaporates. During the time of shortage of cold water supply we have to go forClosed Circuit Cooling Tower. The cooling water is circulates in a close loop consisting tower unit. We may add some percent of the cooling water from the available water resources to the closed circuit cooling system and we can reduce the cooling tower size. Mixing ration means the percentage of the added water. If our mixing ratio is zero, it is called completely closed system. When the mixing ratio is 100%, it is called an open system. Closed Circuit Cooling Tower are suitable for Thermal Power Plant for more information about Closed Circuit Cooling Tower send mail to jc@thecoolingtowers.com.  

• Type: Induced Draft Type
• Tower Material: FRP
• Tower Design: Cross Flow

Our Gear Pumps belongs to family of Positive Displacement Pumps where in driving gear with internal tooth drives the Gear and turns in same direction inside the pump casing.

Counter Flow Cooling Tower   The air flow is directly opposite to the water flow in counterflow. Gravity distributes the water through the nozzles uniformly across the fill material. Advantages of the counterflow design is Spray water distribution makes the tower more freeze-resistant. Disadvantages of the counterflow design is basically higher initial and long-term cost, and Difficult to use variable water flow, as spray characteristics may be negatively affected.

We are leading Closed Circuit Cooling Tower Manufacturer India. We also Closed Loop Cooling tower Manufacturer in India. Closed circuit cooling tower just like the open type, this type of heat exchangers are mostly in the huge industries. We manufactures two types of closed circuit cooling tower and combined flow and counterflow coolingtower. Closed Circuit Cooling Tower are suitable for Thermal Power Plants. Closed Circuit cooling tower certain processes needs a closed loop, that's why the process water for cooling does not come in make contact with the full of atmosphere air. Closed loop type cooling is minimizes process fouling.

Fittings, Cyclones, ducts, FRP Tanks, Pipes, pp pipes, PP Tanks

Cooling Tower, Heat Exchanger and Fiberglass Tank

• Type: Cooling Tower
• Material: FRP, RCC, Wooden
• Weight: 0-100kg, 100-200kg, 200-300kg
• Color: Blue, Light White
• Voltage: 110V, 220V, 380V, 440V.580V
• Condition: New
• Automatic Grade: Automatic, Manual
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Country of Origin: India
• Brand Name: Welltech Cooling Systems

Cooling Tower, aluminium fans, aluminium sprinklers, fibre cooling tower

Closed Circuit Cooling Tower, Natural Draft Cooling Tower

Fittings, bike tank cover, Retail Sale, car air freshener spray

Marine Equipment, electrical and hardware, Construction Equipment

Cooling Tower, Heat Exchanger

Ball Valves, Solenoid Valves, Pneumatic Fittings, Non Return Valve

Cooling Tower, Air Cooled Heat Exchanger, WELDED BONNET HEADER AIR COOLED

Gate Valve

dock bumper, Cup Mounts, Double U Shear Mounts, Spring Isolator

Cooling Tower, Cooling Tower Fans, Cooling Tower Motors

Counter Flow Cooling Tower, Bottle Shape Cooling Tower

Marine Equipment

Cooling Tower, Humidifier, Dehumidifier

Cylinder Head, cast flanges, Automatic Slag Adjuster, Automobile Components