Electric Motors Dealers in Rs Puram, Coimbatore

• Warranty: 1 Year
• Motor Voltage: Up to 415 V
• Usage/Application: Commercial

We offer Servo Motor which is a rotary actuator that allows for precise control of angular position. It consists of a motor coupled to a sensor for position feedback, through a reduction gearbox. The functioning requires a relatively sophisticated controller, often a dedicated module designed specifically for use with Servo Motor. Servo Motors are used in applications such as robotics, CNC machinery or automated manufacturing.

We are offering industrial motors. For industrial agricultural & domestic applications.

We are a renowned name for manufacturing the best quality Single Phase Flange Mounting Motor. This motor is available with capacitor and copter start motor. It is widely acknowledged among the patrons we have for its energy efficiency, high strength and flawless working. This Single Phase Flange Mounting Motor is provided in customized options.Features: Efficiency Accurate design Durability Specifications: Single Phase Flange Mounting Motor 1480 rpm is available with capacitor run & copter start motor Horse Power range: 0.25 HP to 6 HP RPM Range: 3000 rpm, 1500 rpm

• Power: <10 KW
• No of Phase: Single Phase
• IP Rating: IP23

TEFC Motor is probably the most commonly used motor in ordinary industrial environments. TEFC Motor is cheaper more than the open motor, yet offers good protection against common hazards. TEFC Motor is constructed with a small fan on the rear shaft of the motor, usually covered by housing. This fan draws air over the motor fins, removing excess heat and cooling the motor. The enclosure of TEFC Motor is "Totally Enclosed". This ordinarily means that the motor is dust tight, and has a moderate water seal as well. Highlights : Longer service lifeCompletely enclosedLess power consumptionNon-corrosive housingPowered by efficient performance

• Type: copper
• Power Source: 240V
• Rated power(w): 250
• Lifting Power(kg.f): 400
• output torque(n/m): 168
• output torque(r/min): 4.6
• standard drum diameter(inch): 4
• Continued Working Time(min): 5
• MAX HEIGHT(m): 6

 Compact design,attractive appearance,safe and reliable performance.  It has the advantages of light weight ,low noise,convenient to install.  Available in various specifications as per the client requirement.  Manual operation incase of power failure.

Sliding gate automation are depends on gear teethes and moved by motor which make movement through its gear and worm. The Gate slides on sliding track which is made by steel rod. Automation of gates can made from 300 kg to 4000kg. Most of sliding gate motors are 230V AC some of companies provide 24VDC type of motors. We manufacture trackless and hanger gates for large opening areas. Hanger gates are also used for studio and heavy industry. We guarantee our quality with lowest market pricing for electric gates and sliding gate opener. Automatic sliding gates are aesthetically pleasing and the pre-tensioning of the gate leaf construction reduces the risk of bending. Automatic swing gate opener is easy to install with existing gate.

The Submersible Motors are eco friendly rewindable, water filled, wet type. The stator windings are of water proof PVC / Polymer winding insulation enclosed in stainless steel body. Dynamically balanced rotors maintains increased life cycle and uniform clearance in bearings resulting in minimized wear and tear. The high finish thrust bearings are of unique segmented design to withstand high axial thrust load and upthrust loads and lowest friction. The motor housings, upper housings and motor base of high grade, rugged cast iron and specially treated to withstand corrosion. Mechanical seal – SiC / TiC (Optional) prevents entry of abrasive sand particles inside the motor. A large pressure equalising diaphragm with inbuilt spring load ensure safe winding temperature at varied loads. The cable leads are connected & sealed with windings. Motors arrive 100% safely pre-filled with water. For frosty conditions, water with propylene glycol is filled for operating temperatures from – 15° C. Range :  4″ Submersible Motor – 1 HP – 3 HP (1 Ph, 220 / 240V), 1 HP – 5 HP (3 Ph, 415V, 50 Hz) 6″ Submersible Motor – 3 HP – 30 Hp (3 Ph, 415 V, 50 Hz) Designed for 50 / 60 Hz operation. Full SS 304 motors available on 4″ & 6″ on request.

Our Brake Motor are known for their accurate and precise manufacture. Our wide connections worldwide with C&F agents, as well as our extremely professional and dedicated documentation team ensure that our clients have the minimal of issues while procuring a product from us.   Available in Both DC & AC Voltage - 24 - 195 V - 415 V

• Brand Name: RR
• Mounting Type: Foot
• Usage: Sand Washer , Foundry Machinery

• Type: Brake Motor
• Weight: 10-20kg, 20-30kg, 30-40kg, 40-50kg, 50-60kg, 60-70kg, 70-80kg, 80-90kg, 90-100kg
• Color: Black, Blue, Grey, Silver
• Voltage: 110V, 220V, 380V, 440V
• Automatic Grade: Manual
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Phase: SingleTwo, Three
• Application: Fire Enhancement, Stoping Machine Gear
• Condition: New, Used
• Driven Type: Electric
• Current Type: AC, DC
• Speed: 1000-2000rpm, 2000-3000rpm, 3000-4000rpm, 4000-5000rpm

• Type: Low Voltage
• Power: <10 KW, 10-100 KW, 101-200 KW, >300 KW, 201-300 KW
• No of Phase: Three Phase, Single Phase
• No of Poles: 8, 6, 2, 4
• IP Rating: IP55, IP21
• Usage: Construction, Agriculture, Mining, Irrigation, Power
•  :  

• Type: Servo Motors
• Color: Grey, Metallic, Silver, White
• Voltage: 110V, 220V
• Driven Type: Electric
• Feature: Auto Controller, Durable, High Performance
• Warranty: 1Year, 2Years
• Usae: Industrial

Ac Induction Motor

We offer a range of Carbon Brushes Differential pressure switches like Varma tarfag, Astrix, Indfos, Orien Pressure. Switches are assembled in spinning, Combar, and simplex.

Hoist Motors, Steam Engine, hub motor, ac control panel

Electric Motors, Air Compressors, mono block pumps

radiator fan motor, electrical product, Industrial Alternator, Wiper Motor

Multi Speed Motor, E Mill Gear Unit