Electric Motors Dealers in Saravanampatti, Coimbatore

We provide best and quality service for various brands softstarters of various ranges,with quick and quality and in time delivery

• Material: Stainless Steel
• Pressure: High Pressure
• Flow Range: 4, 10, 20, 40 L/min

High-Speed Linear Servo Valves Direct type High-Speed Linear Servo Valves. Direct type high speed linear servo valves use a compact and powerful linear motor as an actuator and have an extremely simple structure that connects the linear motor moving coil, the spool, and the position sensor in series.   High accuracy These valves have a low hysteresis of 0.1 % or less, achieving high accuracy. They allow the main unit to operate with much higher repeatability.   High response characteristics The valves provide significantly high levels of step and frequency responses, which are typically used as measures of response characteristics; the step response is 2 ms (0 <=> 100 %)★, and the frequency response is 450 Hz/-90° (±25 % amplitude)★. Thus, the valves ensure that the main unit can achieve unprecedented high response. (★: Representative values)   Excellent vibration-proof characteristics With a simple structure, the valves offer high vibration resistance.   Excellent contamination resistance The valves are also featured by excellent contamination resistance since they have a simple structure that directly connects the linear motor moving coil, the spool, and the position sensor. Compared to conventional servo valves for which the permissible contamination level is up to NAS 1638 class 7, the direct type linear servo valves can accept a contamination level of up to NAS 1638 class 10. These valves can contribute to greatly reducing the cost of fluid management.

• Voltage: 415 volts
• Frequency: 50Hz
• Motor type: Three phase AC squirrel cage induction motors
• Output range: 0.18KW to 315KW
• Number of poles: 2/4/6
• Standards: IS 12615 : 2011 ,IS 15999(Part 2/Sec 1) ,IS / IEC 60034-1
• Mounting: Foot (B3), Flange (B5), Face (B14), Foot cum Flange (B35), Foot cum Face (B34)
• Enclosure: Totally enclosed fan cooled
• Class of insulation: Class 'F' or 'H'
• Degree of protection: IP 55
• Method of cooling: IC 411
• Duty: S1
• Direction of rotation: Bi-directional
• Bearings: Double shield (ZZ)

KCPL has been manufacturing Carbon Brushes for more than 3 decades to the entire satisfaction of many OEM's and replacement market. The basic raw material in various grades i.e Electro Graphite, Metal Graphite, Natural Graphite, Hard Carbon etc., are purchased from internationally reputed sources. Typical applications include OEMs, Railways, Automotives, Steel Mills, Paper Mills, Power Stations, Cement Plants, Sugar Plants, Domestic Home Appliances, Power Tools etc. From procurement of raw material to the finished product, various checks testings are done to exceed the expectations of the customers. KCPL provides complete technical support to its customers in selection of appropriate grade and maintenance of their equipments for a trouble free operation.

• Speed: 1001- 1500 RPM
• No Of Phase: Three Phase
• Rated Power: 0.5-1 HP
• Brand: TI
• Usage/Application: Industrial
• Motor Mounting Type: Foot Mounted
• Features: Enhanced productivity, Robust and strong, High effectiveness.

• Size: Standard
• Material: Plastic, Stainless Steel
• Shape: Round, Square
• Thickness: 5-10mm
• Certification: ISI Certified
• Color: Grey
• Finishing: Coated

• Brand: Autozon
• IP Rating: IP44
• No Of Phase: Single Phase
• Motor Voltage: AC 230V
• Frequency: 50 Hz
• Warranty In Months: 1 Year
• Weight: 3.2 kg
• Rated Torque: 60Nm
• Motor Type: Tubular Operator

AC 230VOLTS SINGLE PHASE MOTORS USED FOR GENERAL PURPOSE LIKE GRINDERS,INDUSTRIAL PURPOSE MOTORS ECT...

• Material: Metal
• Color: Silver
• Thickness: 10-15mm
• Finish: Polished
• Feature: Durable

SMV series of Vibrator Motors are specially developed for variable individual application to suit all working environments. The Vibrator Motors develops centrifugal force from 5 kg (50 N) to as much as 8000 kg (80000 N). Higher and non standard rating Vibro Motors on request.

We manufacture all types of carbon brushes that are widely used in a variety of applications. They are manufactured using highest quality raw materials of carbon blocks, copper wires, brass sheets, copper wires, etc.  Our carbon brushes are widely used in industries like: Textile Mills & Machinery Textile OverHead Travelling Cleaners (OHTC) DC motors Motors & Generators or Alternators Cement and Sugar Factories Power Stations Portable Tools, etc

• Power ratings available: 3 50W / 750W / 1KW12 KW / 3KW/ 5KW
• Voltage Input: 440V AC 50hz
• RPM: 1440 / 2880 RPM Single / Double shaft extension

Squirrel Cage Induction Motor for Electrical Lab - This Model is a educational model suitable for demonstrating to students the complete know of the Basics, Components, Starting methods, Wear & Tear & Maintenance of these motors packaged in small rating.Students can make connections of their own with the help of the terminations provided for study of features viz Starting methods, Speed control, Speed-Torque, Effect of Phase angle, Study of Cogging/Crawling, Effects of Single phasing, Effect of voltage imbalance operation, Blocked rotor test. 3 Phase AC Squirrel Cage Induction Motor TEFC, IP44, IC01, B3, Class-B, SI, Casting body. 3 Phase AC Squirrel Cage Induction Motor List Of Experiments Starting by DOL Starter Starting by Star-Delta Starter Starting by reduced voltage starter Speed Control by WVF method Load test & No load test of machine Speed-Torque Analysis Voltage-Speed Analysis Speed reversal Efficiency Analysis Blocked rotor test Cold Resistance & Hot Resistance Motor Operation parameters Basic Overhauling.

Procured from the trustworthy sources, we bring forth high quality Sharp Electric Motors to all our precious buyers. Our exclusive assortment of Electric Motors is available in ample sizes. Our Electric Motors are energy efficient induction motors. Built with robust construction, our Motors are highly reliable as well as durable. They can efficiently perform under any type of working condition. The Motors are comprehensively used in industrial as well as agricultural applications. We are a reliable Supplier of Electric Motors in Tamil Nadu (India). Salient Features : Fitted with Thermal Overload Protector High quality extruded aluminum body Double sealed precision ball bearings with life time lubrication TEFC capacitor start and run motor Single (or) Three phase options Stainless steel shaft Light Weight Graded cast iron motor bearing housing

• Material Type: Plastic, Stainless Steel
• Voltage: 280 V
• Phase: Single Phase
• Motor Type: AC
• Motor Brand: Panasonic
• Features: Energy Saver, Durable,
• Usage/Application: Industrial
• Frequency: 2kHz

Factory fitted Motors with EMCO Dyna Torque DC brake 14.458 and AC brake, AC 1000, other brand of brakes on request, Brake Motors are available with the braking torque of 4NM to 800 NM (Size 6 - Size 40). Low rotor Inertia, Torque in 4 to 800 NM, Simple Wear Adjustment.

Frame less pancake type DC torque motors with integral commutator configuration supplemented with high energy rare earth permanent magnet stator and cantilever brush ring.

• Phase: Three Phase
• Brand Name: stark
• Speed: 750 / 1000 / 1500 / 3000 RPM
• Motor Voltage: 240v/415v
• Frame Size: 63 to 180L
• No Of Poles: 2p/4p/6p/8p

• Speed (Rpm): 240 RPM
• Motor Voltage: 230 V
• Power (Watts or HP): 1 HP

Polisher Electric Motor

Sharp TEFC Squirrel Cage Induction Motors are designed, manufactured and tested to meet the latest British and international standards. Their proven high quality and rugged cast iron construction backed by a 12 month warranty make the Sharp Squirrel Cage Induction Motors ideally suitable for all industrial applications.   Rating and Standards   Electric Supply:   Three Phase motors are suitable for 415V ± 10%, 3 Phase, 50 Hz ± 5% supply. For combination of voltage and frequency maximum variation of 10% is allowed.   Single Phase motors are suitable for 220V ± 10%, 50Hz ± 5% supply. For combination of voltage and Frequency maximum variation of 10% is allowed.   Motor of variable voltage and dual voltages can be supplied on specific order / request.       Enclosure:   The standard protection is IP 54/IP 55.       Insulation:   All motors are of Class ‘F’ insulation with temperature rise restricted to Class ‘B’ limits, ensuring reliability and long life.       Duty Rating:   All motors are continuously maximum rated type S1 as per DIN EN 60034-1 at 50Hz, 40ºC and 1000 m. Motors of other duty conditions (S2, S3 etc) can be offered on request.       Ambient:   Standard Motors are designed to operate in an ambient temperature of -20ºC (-4ºF) to 45ºC (113ºF).       Altitude:   Standard motors are designed for operation at an altitude not exceeding 3300 feet (1000 meters) above, sea level. For higher altitudes derating of output kW may be necessary.       Mounting:   Motors are available in foot mounted and flange mounted designs confirming to IEC 72 (Dimensions only)/DIN 42673/ISI231 and IEC 72 (Dimensions only)/DIN 42677/IS 2223 standards respectively     Construction   Frames and Endshields:   Stator frames and end shields are made from high grade cast iron for exceptional strength and corrosion resistance. They are accurately machined to close tolerance in order to ensure rigid alignment and minimum vibration.       Cooling system:   Cooling fins are cast integrally with Stator frame and endshields. High airflow external fans with stator frames of deep fins construction ensure adequate cooling of the motor. Ensuring extended motor life.       Fan and Fan Cowl:   Polypropylene fans are fitted for effective cooling. Fan cowls are of heavy gauge pressed steel, construction, securely bolted to the motor endshield.       Stator Assembly with Winding:   The integral system of wire, slot and phase insulation and the overall varnish impregnation provide superior winding rigidity capable of withstanding vibration limits.       Bearing:   Standard motors are fitted with high quality double side sealed, C3 Clearance ball/bearings with pre-packed lubricants.       Rotor Assembly:   The rotor core consists of annealed and insulated laminations with a pressure die-cast high conductivity aluminium cage. Integrally cast with the cage are wafter blades and balance weight supports. The whole assembly is dynamically balanced to ensure quiet and vibration free operation.       Terminal Box:   Terminal boxes are rotatable 4 x 90 degree increments. Permitting the cable entry from any direction.   The terminal box is well sealed and located at the right hand side of the frame. Earthing terminal is provided in all motors.       Hardware:   All hardware is electro zinc plated for better corrosion resistance.       Finish:   All inside exposed surfaces are cleaned and sprayed with a corrosion inhibiting coating. All components are mechanically or chemically cleaned prior to the application of a phenolic rust proof primer giving excellent corrosion protection. The assembled motor is finished in a super enamel grey lacquer.       Testing:   Each motor undergoes a full program of tests during manufacture and prior to despatch as per IEC 34-1 /DIN EN 60034-1/IS 325 standard.       Range:   KW – 0.18 kW to 15 kW.Speed – 750/ 1000/ 1500/3000 rpmSpecial Motors – As per customer’s requirement.

Range: 0.25HP TO 30 HP Voltage: 20V415V670v48V42V Speed: 28801440960 Class of insulation: F Mounting: Foot, Flange as per custom built on request Degree of protection: IP55 standard Pumps: Dowty, Boss, rest on request Design features Energy efficient (EFF1 and EFF2) motor and optimal fits based on the pump dimensions provides trouble free operations. This model comes with bigger series of bearings on the drive end and non drive end when compared to the standard motors

Revathi Gears is a specialist manufacturer of a gears and gear products, gear boxes, gear components and geared motors. We offer a range of geared motors which is unparalleled in the gear industry. A long with our geared motors our key product lines include windmill gearboxes also. Our experience is built on supplying our customers with first class geared motors at the best possible price and with the best possible support after the sale. We Endeavour to keep our range as in depth as possible and as well as geared motors. If you would like any further information regarding geared motors then please feel free to contact us, we will be more than willing to answer any questions or queries which you may have regarding our geared motors or any of our other engineering components. We manufactures all kinds of spur gears as per customer specification (standard / non-standard items).

• Features: High in demand, Easy to use, Quality product.

These motors are made of stainless stell material, total ss 304 construction with SS 316 material as option. Point submersible motors designed in 4" configuration, water filled and rewindable and easy to maintain. Product Features 4" Submersible water filled and rewindable motor with insulated windings. Complete SS 304 construction with optional SS 316 Radial, Axial thrust bearing and water thrust bearings are lubricated. Shafts are induction hardened SS 431 material Special winding design for high torque, low temperature rise, high efficiency Motors are pre-filled with water and glycol mixture for longer life. Diaphragm cup with suitable protection for pressure and volume variation inside motor. 4" Specification Ratings: Single Phase - 0.37 to 4 KWThree Phase - 0.37 to 5.5 KW Supply Voltages (Tolerance +6%/-10%)50HZ, 1 Phase, 220 V, 230 V50HZ, 3 Phase, 380 V, 400 V, 415 V60HZ, 1 Phase, 115 V, 230 V60HZ, 3 Phase, 230 V, 380 V, 460 V Degree of Protection: IP 68 Continuous duty Ambient temperature: 45 C Rotation: Single Phase - CCWThree Phase - CCW and CW Maximum nos. of starts/hour:0.37 to 2.2 KW - 203 to 5.5 KW - 10 Water pH: 6.5 - 8 Minimum cooling flow along the motor: 8cm/sec Motor Protection: Select thermal overloadProtection with trip time Maximum submerged depth: 350 meters 4" On Request AISI 316 stainless steel construction.Special Voltages.   Technology   Point Submersible Motors are developed and manufactured user-freindly wet type Rewindable. Motor is Pre-filled with clear, cold, filtered water. Motors can also be customised if the requirements are not covered by the overview. Point 4" Submersible Motors are available from 0.37kW to 7.5kW with NEMA Standards. Point 6" Submersible Motors are available from 2.2kW to 37kW with NEMA Standards. Material Options The submersible motors are available in stainless steel AISI 304 grade in 4" and 6" submersible motors. Motor shaft - AISI 431 Stator Shell - AISI 304 / AISI 316 Diaphgram - Nitrle Rubber Stator The stator windings are water proof poly wrapped copper winding wires. Housing Shell The Housing shells are made with AISI 304 Grade Stainless steel. Thrust Bearing / Pad Thrust Bearing and Pad made with SS 420 and graphite Carbon material is long life and increase the efficiency of the pump. Diaphgram Diaphgram is provided to guard the pressure and volume variations of the water inside the motor. Diaphgram is made with Nitrle Rubber Motor Base Motor base is made with AISI 304 grade stainless steel.

• Component Name : Motor Cover
• Mould Type : GDC
• Component Weight : 2 Kgs
• Shell Core Used : No
• Component Size : 150*150*200

• features: Stainless steel rod with three leafs provided for stirrer,Easy to change stirrer rods - forward & reverse switch provided
• Motor: 2HP, 3 Phase, 415V, 1440 RPM, Flange Type

Stainless steel rod with three leafs provided for stirrer easy to change stirrer rods - forward & reverse switch provided.

We are a leading electrical carbon brushes manufacturer. The electrical carbon brushes that we offer fulfills the established standards of the industry. our electric carbon brushes are well cherished for its flawless features. we also provide customization to our clients according the details given by the clients. applications railwaysautomotivesteel millspaper millspower stationscement plantssugar plantsdomestic home appliancespower tools attributes long functional lifestrong durabilitytestedeasy to install

• Brand Name: Sky
• Voltage: 440V
• Frequency: 50Hz
• Phase: 3 Phase
• Incomer Supply: 415V
• Usage/Application: Agriculture

kcpl has been manufacturing carbon brushes for more than 3 decades to the entire satisfaction of many oem's and replacement market. The basic raw material in various grades i.e electro graphite, metal graphite, natural graphite, hard carbon etc., are purchased from internationally reputed sources. typical applications include oems, railways, automotives, steel mills, paper mills, power stations, cement plants, sugar plants, domestic home appliances, power tools etc. from procurement of raw material to the finished product, various checks / testings are done to exceed the expectations of the customers. kcpl provides complete technical support to its customers in selection of appropriate grade and maintenance of their equipments for a trouble free operation. kcpl is fully geared up with an experienced sales team which remains in constant touch with the customers.   dimension and designs of carbon brushes           t = tangential - brush dimension in direction of rotation of commutator or slipring a = axial - brush dimension parallel to the axis of rotation r = radial - brush dimension perpendicular to the axis of rotation                     dimensions of carbon brushes are specified according to din iec 60136-3 in the sequence t x a x r. In order to avoid misinterpretation, we suggest to specify the dimensions in this sequence. the cross section of the flexible is determined according to a.m. Norm and din 46438. the length (l) of the flexible is the distance between the top of the brush and the centre of the terminal (see sketch). while ordering for brushes with special terminals (e.g. Plug-contact) the length (l) of the flexible should be measured in accordance with the sketch. in standard din 46224, recommendations are given for basic types and standards for dimensioning of plug types.         pull load testing             user industries oem railways automotives steel mills paper mills power stations cement plants sugar plants domestic home appliances power tools   grades handled electro graphite (eg) metal graphite (mg) carbon graphite (cg) natural graphite (ng) hard carbon (hc) resin bonded (rb) silver graphite (sg

• Power: 1/5 HP
• Voltage: 220 V
• Frequency: 50 Hz
• Features: Low maintenance, Sturdy design, Dimensional accuracy.