Electric Motors Dealers in Coimbatore

• Material: Metal
• Finishing: Polished
• Driven Type: Electric
• Color: Black, Blue, Brown, Green, Yellow
• Power: 20W
• Application: Use To Water
• Voltage: 110V
• Dimension: Inner Dia 110 Mm X 2 Thickness
• Type: Electric Motor Body
• Phase: Single
• Warranty: 2year
• Country of Origin: India
• Item: SMP-001

• Power: 1 Hp
• Phase: Single
• Speed: 1500 Rpm
• Voltage: 220V
• Frequency: 50 Hz
• IP Rating: IP21
• Mounting Type: Foot Mount
• No of Poles: 4

We manufacture a wide range of electrical motor stampings for assembly of electric motors, pump sets, submersibles and mono- block pumps.

Rapping systems are provided for collecting and emitting electrodes. Geared motors drive these rappers. The rapping system employs tumbling hammers, which are mounted on the horizontal shaft. As the shaft rotates slowly the hammers tumble on the shaft will clean the entire field.  

Range:1. 27 nm to 95nm low moment of rotor inertia very high dynamic response low overall dimensions sinusoidal b. E. M. F   Low cogging Torque Encoder:2500ppr with u. V. W signals Mounting:b5 (flange mount) , ip55

• Material: Stainless Steel
• Pressure: High Pressure
• Flow Range: 4, 10, 20, 40 L/min

High-Speed Linear Servo Valves Direct type High-Speed Linear Servo Valves. Direct type high speed linear servo valves use a compact and powerful linear motor as an actuator and have an extremely simple structure that connects the linear motor moving coil, the spool, and the position sensor in series.   High accuracy These valves have a low hysteresis of 0.1 % or less, achieving high accuracy. They allow the main unit to operate with much higher repeatability.   High response characteristics The valves provide significantly high levels of step and frequency responses, which are typically used as measures of response characteristics; the step response is 2 ms (0 <=> 100 %)★, and the frequency response is 450 Hz/-90° (±25 % amplitude)★. Thus, the valves ensure that the main unit can achieve unprecedented high response. (★: Representative values)   Excellent vibration-proof characteristics With a simple structure, the valves offer high vibration resistance.   Excellent contamination resistance The valves are also featured by excellent contamination resistance since they have a simple structure that directly connects the linear motor moving coil, the spool, and the position sensor. Compared to conventional servo valves for which the permissible contamination level is up to NAS 1638 class 7, the direct type linear servo valves can accept a contamination level of up to NAS 1638 class 10. These valves can contribute to greatly reducing the cost of fluid management.

• Approx Price: Rs 16,500 / Piece
• Operation Mode: Semi-Automatic
• Product Range: Espresso , Cappuccino, Latte, Tea

We make sure that the offered lot complies with the stated quality norms, thus check the product quality on several stages. Using premium packaging materials, we secure our products properly for transportation and label it properly to provide information such as address of manufacturer/distributors, MRP, quantity, etc.

• Size: As Per Capacity
• Material: Aluminium, Metal, Casting Iron,
• Color: May Vary According to Design
• Finishing: Non Polished, Polished
• Feature: Perfect Shape
• Dimensions: Customized
• Usage: Industrial
• Process: Die Casting

Our Stepper Motor (or step motor) is a brushless DC Electric Motor that divides a full rotation into a number of equal steps. The position of Stepper Motor can then be changed to move and hold at one of these steps without any feedback sensor (an open-loop controller), as long as the motor is carefully sized to the application. The performance of a Stepper Motor is strongly dependent on the drive circuit. Torque curves may be extended to greater speeds if the stator poles can be reversed more quickly, the limiting factor being the winding inductance. To overcome the inductance and switch the windings quickly, one must increase the drive voltage. This leads further to the necessity of limiting the induction of current (high voltages).

• Body Material: Metal
• Color: Green
• Usage/Application: Industrial
• Voltage: 380V
• Frequency: 50Hz, Less Maintenance,High Performance Level,High Performance Level
• Warranty: 1yr, 1 Years
• Country of Origin: India
• Condition: New

Cooling Tower Motors are the products of the expertise of the highly qualified technical team with a stage-wise rigid inspection method under the TQM concept.Salient Feature :The Motors are rugged in construction and are designed for satisfactory operation at wide voltage fluctuations.Special care is taken in the design of the Cooling Tower application.Higher efficiency and power factor ensure lower power consumption and lower operating temperature of the motor.Motors with Ip55 degree of protection and class 'F' insulation.Shaft extension as per customer requirement (can be provided with lock nuts).The rotors used are pressure die-cast and dynamically balanced.Connections are made by electric brazing to eliminate loose connections.Winding is varnished using vacuum impregnation and treated for protection against humid atmospheres.Bearings are shrunk fit in bearing seats which are ground to close tolerances.Mounting: V1 (Shaft downward position)Relative Humidity: 90 %Flange : B- as per IS - 2223The shaft can be supplied with stainless steel material AISI - 410 as per customer requirement.

• Application: Motor Starter
• Color: Creamy
• Condition: New

• Material: Copper,Graphite
• Usage/Application: Crane
• Brand: Asppice
• Rated Current: 50 to 500 A
• Setting Height: 102 to 230 mm (Also Customized)

We offer helical gear motors. The dependable and performing solution for all in-line drive applications featuring unsurpassed quality to price ratio. Foot or flange mounting are possible in any mounting position, making the installation easier than ever.

• Material: Cast Iron
• Shape: Round
• Feature: Light Weight, Non Breakable, Perfect Finish, Rigid Design
• Finishing: Polished
• Country of Origin: India
• Brand Name: JE
• Motor Voltage: 220 to 690 V
• Power (Watts or HP): 0.18 kW to 11 kW