Nippon Kuhlers Malumachampatti Village, Coimbatore, Tamil Nadu

The U-tube head (U) is a very simple design requiring a bundle of U tubes, only one tube sheet, no expansion joints, and no rear-end head at all, allowing easy removal of the bundle. The thermal stress problem is eliminated because each tube is free to expand/contract independently. One disadvantage is, individual tube replacement is not possible except in the outer rows, and an even number of tube passes is required. Some tubes are lost in the center due to HEAT EXCHANGERS 17.7 tube bend limit, and tube side mechanical cleaning of the bends is difficult. Flow-induced vibration could be a problem for tubes in the outermost row. It is the lowest-cost design because there is no need for the second tube sheet.

The gear shafts are linked via a transfer gear, resulting in a shorter overall transmission length. The transmission electronic control unit (ECU), sensors and solenoids are all housed within the transmission valve body. The Twin Clutch shift transmission is equipped with a transmission oil cooler, and uses a synthetic fluid designed for twin clutch transmissions.

We can design, manufacture and supply a range of Air Blast Transformer Oil Coolers used on large HVDC (High Voltage Direct Current) applications worldwide within the Power Generation, Transmission and Distribution industries. The transformer oil coolers are available for most transformer projects and offer a wide range of capacity variants with different installation arrangements, and we also supplies to Railways for their ACEMU projects. To meet varying operational requirements units can be constructed in a variety of materials, including all aluminium (tubes fins), copper or stainless steel. This takes into account key design parameters such as thermal performance, weight, orientation, corrosion protection for arduous environments.

Storage tanks are containers that hold liquids, compressed gases (gas tank) or mediums used for the short- or long-term storage of heat or cold. Storage tanks are often cylindrical in shape, perpendicular to the ground with flat bottoms, and a fixed or floating roof. Storage tanks are available in many shapes: vertical and horizontal cylindrical; open top and closed top; flat bottom, cone bottom, slope bottom and dish bottom.

A heat exchanger is a device used to transfer heat between one or more fluids . It is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. The simple design of a shell and tube heat exchanger makes it an ideal cooling solution for a wide variety of applications. One of the most common applications is the cooling of hydraulic fluid and oil in engines, transmissions and hydraulic power packs.

Radiators are heat exchangers used to transfer thermal energy from one medium to another for the purpose of cooling and heating. The majority of radiators are constructed to function in electronics. The radiator is always a source of heat to its environment, although this may be for either the purpose of heating this environment, or for cooling the fluid or coolant supplied to it, as for engine cooling.

Power Source : Electric

Shape : Rectangle

Color : Blue

A pressure vessel is a closed container designed to hold gases or liquids at a pressure substantially different from the ambient pressure. Pressure vessels can theoretically be almost any shape, but shapes made of sections of spheres, cylinders, and cones are usually employed. A common design is a cylinder with end caps called heads. Head shapes are frequently either hemispherical or dished. Pressure vessels are used in a variety of applications in both industry and the private sector.

We have developed oil cooling solutions for all levels of high performance marine engines. Marine Oil Coolers have been the first choice of cooling solution for many marine engine and transmission manufacturers for over 30 years . Our marine oil coolers are used on the mechanized Fishing Boats and Trawlers.

We have developed oil cooling solutions for all levels of high performance marine engines. Marine Oil Coolers have been the first choice of cooling solution for many marine engine and transmission manufacturers. Our marine oil coolers are used on the mechanized Fishing Boats and Trawlers.

Marine heat exchangers are the most common way to cool a boat's/ship engine, using the lake, river or Sea water in which the boat floats. Direct cooling of the cylinders and heads by sea-water is unsatisfactory because sea water will eventually ruin the cylinder block and heads. Since this water may be corrosive the engine may be cooled by a sealed mixture of distilled/Fresh water and antifreeze. Heat from the water-antifreeze mixture is then transferred to the Sea (or lake or river) water which flows into a heat exchanger. The water-antifreeze mixture runs through the heat exchanger dumping heat, but remaining separate from corrosive salts and chemicals found in the water the boat is floating in. If the Sea water eventually corrodes and ruins the heat exchanger it can be replaced at a fraction of the cost of replacing the engine.

An intercooler is any mechanical device used to cool a fluid, including liquids or gases, between stages of a multi-stage heating process, typically a heat exchanger that removes waste heat in a gas compressor. They are used in many applications, including air compressors, air conditioners, refrigerators, and gas turbines Intercoolers increase the efficiency of the induction system by reducing induction air heat created by the supercharger or turbocharger and promoting more thorough combustion. This removes the heat of compression (i.e., the temperature rise) that occurs in any gas when its pressure is raised or its unit mass per unit volume (density) is increased.

An hydraulic oil cooler is a device designed to prevent oil used in hydraulic systems from overheating. This is a critical function in hydraulic systems, as overheating of the oil can lead to a drop in system efficiency and excessive wear of the system components in general due to reduced oil viscosity.   In most cases, the coolers allow the oil to shed accumulated thermal energy into a secondary medium, typically water or air, by passing the hot oil through a series of thin tubes exposed to a constant flow of low temperature cooling medium. The cooling medium absorbs heat from the oil and carries it away from the cooler, where it is typically shed into the atmosphere. Common hydraulic oil cooler designs include radiator, shell and tube, Wire finned and frame types. Oil Cooler is used for Earth Moving Machines, Like JCB, L&T POCLAIN, TATA Hitachi, BEML Komatsu, Hyundai Robex.

In Gearboxes the oil gets heated to very high temperatures. Therefore, it is very important to implement a very efficient and highly reliable Cooling System to cool down the oil and maintain it to a stable temperature. This is the only way to make Gearboxes work properly and Gear box oil coolers are used.

finned tubes are always used in air-cooled exchangers to compensate for the low air side heat transfer coefficient. a metal tube having fins ( i.e., metal plates, jointed to the tube, perpendicular to its length ) to transfer heat from the tube to the surrounding air. We are well-equipped with advanced facilities, which enable us to manufacture and supply top-notch quality finned tubes.

Finned Tube Heat Exchangers consist of a shell & finned tubes assembly. Fins are used to increase the effective surface area of heat exchanger tubing. Finned tubes are used when the heat transfer coefficient on the outside of the tubes is appreciably lower than that on the inside; as in heat transfer from a liquid to a gas, vapor to a gas, such as steam to air heat exchanger, thermic fluid to air heat exchanger. When an extended surface is needed on only one fluid side (such as in a gas to liquid exchanger) or when the operating pressure needs to be contained on one fluid side, a finned tube heat exchanger may be selected.    Applications of finned tube heat exchangers include Steam air heater / steam radiator, Thermic fluid air heater / thermic fluid radiator, Hot water air heater / hot water radiator, Air heater for fluid bed dryers, Air heater for spray dryers, Air heater for flash dryers and Air heater for dryers.

Condenser coils usually consist of arrays of copper tubes that penetrate at right angles closely stacked aluminium plates. These plates provide a system of continous fins for enhancing air-side heat transfer.Even though air cooled condenser coils can be cooled by natural convection, they are usually installed with fans. An evaporator is a device used to turn the liquid form of a chemical into its gaseous form. The liquid is evaporated, or vaporized, into a gas. It can also be used to remove water or other liquids from mixtures. The process of evaporation is widely used to concentrate foods and chemicals as well as salvage solvents. One of the most important applications of evaporation is in the food and beverage industry. Foods or beverages that need to last for a considerable amount of time or need to have certain consistency, like coffee, go through an evaporation step during processing

Air Compressor Tanks offered provide for perfect support as storage tanks and can be made available in stainless steel metal construction as well as with high pressure handling capacity as per the specifications provided by the customers. These tanks are suitable for storage of air as well as providing for stable output air pressure. Some of its features include support reduction in temperature of air channel; support removal of water, dust and other impurities; quality material finish for lasting performance; blasted finish of tans both from inside and outside for best surface quality; choice of tanks in different finish dimensions

A charge-air cooler is simply an all-encompassing term, meaning that it cools the turbo's air charge before it is routed into the engine. Usually a charge-air cooler means an air-to-air cooler where the heat is rejected using ambient air flowing through the heat exchanger, much like the engine's coolant radiator. In general, an intercooler or aftercooler is said to be a Charge-Air Cooler.

The fluid released from the valve is passed back to the inlet side of the pump instead of discharging into the reservoir. This save energy that would be used if the fluid had to be drawn through the fine mesh filter screen. Line pressure is too great for the converter, so the secondary regulator acts as a pressure reducer. A portion of the fluid returning from the converter passes to an Brake oil cooler that provides low pressure lubrication of the gear box.

We are offering our customers a wide range of M.S & SS Battery Box for Railways. These Battery Box for Railways of various voltage withstand and sizes available with acid proof inside and outside coating.

We offer our clients, a wide range of Industrial Air Heaters that is used to heat air with radiant heat, forced convection or resistive heat elements. These used steam, hot water of electricity and thermic fluid oil for excellent functioning. Our range is designed as per industry quality standards and norms, and has gained appreciation from the clients due to its performance, durability, corrosion resistance and dimensional accuracy.  These are used in various industries for heating continuous flow of air to required temperature by using steam as heating media.   Steam is passed inside the finned tubes bunks and air outside the tubes. These types of Air-Pre-Heaters find application in papers mills, sugar mills , power plants etc.