Power Transformers Sales and Services Irugur, Coimbatore, Tamil Nadu

PTss-TFS is basically designed to operate on an energized Transformer’s OLTC to remove moisture and carbon particles from it. The moisture and carbon are removed by circulation of Oil through TFS which has special type of absorptive cartridges which absorb and remove moisture to less than 10 PPM in and carbon particles upto 0.3 microns from the oil. This process does not employ any heating or vacuum process of oil thereby retaining the original virgin characteristics of the oil. Process does not remove Oxidation inhibitors or fault gases. PTss-TFS will work on pre-programmed schedule or on the preset tap changes and automatically triggers itself for operation and is safe for unattended operation. Capacity PTss-TFS comes in 2 optional flow capacities from 260 LPH to 700 LPH and can be sized based on the requirements of the OLTC oil capacity. TFS1GC1X – Tapchanger filtration System with Dissolved water as well as Carbon Removal(260 LPH)TFS1GC1A – Tapchanger filtration System with ONLY Carbon Removal(260 LPH)TFS3GA1X – Tapchanger filtration System with Dissolved water as well as Carbon Removal (700 LPH)TFS3GA1A – Tapchanger filtration System with ONLY Carbon Removal(700 LPH). 

Technology is of Online Dryout process for drying out wet transformer in energized conditions by monitoring the percentage of Moisture in the insulation to its Dry Weight. PTss-Velcon TDS equipment is fitted with TIMES (Transformer Insulation Moisture Estimation System) which automatically estimates the %M/DWi (%Moisture to Dry Weight of insulation) and triggers itself for self removal of moisture in Transformers. It uses Specialized cartridges for maintaining the %M/DWi to acceptable levels. This equipment is capable of being safely fitted, operated and moved between transformers/reactors under energized conditions and is being installed upto 764 KV Class Transformers. Process will not deteriorate any of the Oil characteristics before and after the process. Process PTss-TDS is basically designed to operate on an energized Transformer to remove moisture from it. The moisture is removed by circulation of Oil through TDS which has special type of absorptive cartridges which absorb and remove moisture from the oil. This process does not employ any heating or vacuum process of oil thereby retaining the original virgin characteristics of the oil. Process does not remove Oxidation inhibitors or fault gases. Equipment estimates the %M/Dwi (Percentage of Moisture to Dry Wt of Insulation) and automatically triggers itself for operation and is safe for unattended operation. Capacity TDS comes in various flow capacities from 120 LPH to 2400 LPH and can be sized based on the requirements of the transformer oil capacity. Variable Flow option is available. Based on the selection chart customers can choose the equipment.TDS5FV4X – Transformer Dryout System with 120-1200 LPH(Variable Flow) and 4 CartridgesTDS9FV8X – Transformer Dryout System with 240-2400 LPH(Variable Flow) and 8 Cartridges. Power Requirements 3 Phase, 415 Volts, 50 Hz 5.0 Hp 3.7 Dimension and Weight of equipment TDS5FV4X : 1270 x 800 x 1730 mm Weight: 650 Kgs Equipment (Nett) and 900 Kgs (gross) packed with accessories.TDS9FV8X : 1600 x 800 x 1716 mm Weight: 800 Kgs Equipment (Nett) and 1000 Kgs (gross) packed with accessories. Communication Details External interfaces provided on TDS include Ethernet ( RJ45 ) for SCADA over OPC Server / RS 485 / Modbus RTU and ASCII

Filter reactor are removed by circulation of Oil through TFS which has special type of absorptive cartridges which absorb and remove moisture to less than 10 PPM in and carbon particles upto 0.3 microns from the oil. This process does not employ any heating or vacuum process of oil thereby retaining the original virgin characteristics of the oil. Process does not remove Oxidation inhibitors or fault gases. PTss-TFS will work on pre-programmed schedule or on the preset tap changes and automatically triggers itself for operation and is safe for unattended operation.